• The Korean Journal of Food And Nutrition
• /
• v.30 no.5
• /
• pp.973-982
• /
• 2017

Gastrodia elata Blume often has been used for the treatment of headaches, convulsions, hypertension, and neurodegenerative diseases. The main active constituents are gastrodin, 4-hydroxybenzyl alcohol, vanillyl alcohol, 4-hydroxybenzylaldehyde and parishin A, B, C and E. Because Gastrodia elata has also unacceptable off-odor (swine barnyard-like) for food, there is a need to reduce it as well as allow for greater utilization as a functional food materials. In this study, a major off-odor producing substance of Gastrodia elata was fractionated by steam distillation and silica gel column chromatography. The substance was identified as p-cresol(4-methyl phenol) by GC-MS analysis and comparison of the retention time with that of an authentic compound in GC. The content of p-cresol in fermented Gastrodia elata was decreased. A fermented sample of Latobacillus sakei for 2 days was reduced to 54.7%, when compared with a unfermented sample. The five parishin derivatives in Gastrodia elata were identified by HPLC-MS analyses, and a comparison of HPLC retention times with those of authentic compounds. When compared with parishin derivatives of an unfermented Gastrodia elata, those of Gastrodia elata fermented by L. sakei, increased to 18.3% for 2 days. Increases of about 14.0~38.4% of the total phenolic compounds and 57.4~77.3% total flavonoids were found in fermented extracts, by 3 lactic acid bacteria strains. They were compared with $97.1{\pm}2.9{\mu}g/g$ and $40.9{\pm}2.0{\mu}g/g$ in the unfermented control, respectively. The extracts of Gastrodia elata Blume that were fermented by lactic acid bacteria had higher DPPH free radical scavenging activity and FRAP reducing power than the unfermented control.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.387-393
• /
• 2011

We analyzed the particle size distributions of three commercially available Devarda's alloy (DA) products, tested the nitrate recoveries of each particle size category, and examined the amounts of DA required for 100% recovery by varying $NO_3$-N concentration from 0.5 to 10 mg. We observed that use of DA coarser than 200 mesh resulted in poor analytical recovery (<80%). While the tested alloys were considered to be fine enough (>90% of the particles were less than 100 mesh), the recovery dramatically declined from 80% to 10% in a high concentration range (4 to 10 mg N). Satisfactory recovery was obtained by increasing the amount of finer DA (less than 300 or 450 mesh). However, there was no quantitative relationship between the amount of fine DA and nitrate recovered. Generally, the amount of nitrate reduced per unit DA decreased as the recovery efficiency declined. These results suggest that a sufficient amount of DA must be determined based on particle size distribution, and that treatment of at least two levels of DA and comparison of the subsequent change in nitrate recovery is required for soils containing high levels of nitrate. In addition, further studies are encouraged to account for the observed stoichiometric dis-equivalence of recovered nitrate N per unit mass of DA.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.195-201
• /
• 2022

This study aims to evaluate the feasibility of the disinfection of clinical ultrasound probes using the vapor fumigation method, which can quickly achieve high-level disinfection. Upon the inspection of the microbial contamination level of clinically used ultrasound probes, nine different types of bacteria were detected. The disinfection efficacy of 7.5% and 35% hydrogen peroxide (H₂O₂) was comparatively tested for the detected microbes. The 35% H₂O₂ demonstrated superior efficacy per disinfection duration. No significant change was observed in the rubber component of the ultrasound probes as a result of the 35% H₂O₂ disinfection treatment. The probes were contaminated with the microbes detected in the microbial contamination level inspection and subsequently disinfected using the novel medical disinfector that utilizes the vapor fumigation method. As a result, the disinfection using the novel device achieved 100% eradication of the microbes from the probes.This study demonstrates that the novel vapor fumigation method-based disinfector provides a faster and more powerful means of disinfection than the conventional disinfection methods. Therefore, the novel disinfector has the potential to be used as a convenient ultrasound probe disinfector in clinical settings.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.935-941
• /
• 2022

The purpose of this study was to investigate whether the activity of ginsenoside metabolites and the intestinal immunity antioxidant activity were remarkably improved by lactic acid bacteria fermentation by adding a small amount of ginsenoside to the complex extracts of fruits and vegetables. It was confirmed that the increase in intestinal immunity antioxidant activity due to synergistic effect was observed in the fruit-vegetable extract containing ginsenoside compared to the ginsenoside-only extract or the fruit-vegetable extract. Then, by adding ginsenosides by content, the concentration of ginsenosides that can obtain a synergistic effect according to the fermentation of lactic acid bacteria was determined. As a result, it was confirmed that a synergistic effect was exhibited when lactic acid bacteria were fermented and extracted by mixing ginsenosides in a mass ratio of 3 to 10% with respect to the mass of the fruit-vegetable mixture. As a result, when treated at a concentration of 200 ㎍/ml, the fruit-vegetable complex extract containing ginsenoside metabolites inhibited the generation of NO by about 60% compared to the complex extract containing no ginsenoside, The expression of IL-1β was suppressed by 63%, the expression of IL-6 by 69%, and the expression of TNF-α by 76%, confirming that the intestinal immune antioxidant properties were significantly improved.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.218-226
• /
• 2022

Hydrogen, a carrier of large-capacity chemical and clean energy, is an important industrial gas widely used in the petrochemical industry and fuel cells. In particular, hydrogen is mainly produced from fossil fuels through steam reforming and gasification, and carbon dioxide is generated as a by-product. Therefore, in order to obtain high-purity hydrogen, carbon dioxide should be removed. This review focused on free-standing polymeric membranes and mixed-matrix membranes (MMMs) that separate hydrogen from carbon dioxide reported in units of Barrer [1 Barrer = 10^-10 cm³ (STP) × cm / (cm² × s × cmHg)]. By analyzing various recently reported papers, the structure, morphology, interaction, and preparation method of the membranes are discussed, and the structure-property relationship is understood to help find better membrane materials in the future. Robeson's upper bound limits for hydrogen/carbon dioxide separation were presented through reviewing the performance and characteristics of various separation membranes, and various MMMs that improve separation properties using technologies such as crosslinking, blending and heat treatment were discussed.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.264-272
• /
• 2023

The aim of this study was to compare the antioxidant activities and functional contents of Korean conventional and Chinese seed gingers from the Jeollabuk-do Wanju and Chungcheongnam-do Seosan regions. Ginger samples were subjected to steaming treatments for different durations (2-8 h) at 121℃ using an autoclave. The antioxidant activity was evaluated by measuring total polyphenol and flavonoid contents and ABTS and DPPH radical scavenging activities, while functional ingredient contents were analyzed for gingerols and shogaols. The results showed that Wanju conventional seed ginger (WO-2) had the highest total polyphenol (85.24 mg GAE/g) and flavonoid (98.14 RE/100 g) contents, surpassing that of the control in all steamed groups at 6 h. ABTS radical scavenging activity showed a strong correlation with total polyphenol and flavonoid contents. The control groups indicated that Korean conventional seed ginger had 1.0-1.3 times higher gingerol contents compared to Chinese seed ginger. Furthermore, the content of shogaols, considered major functional ingredients, increased significantly with longer steaming durations, reaching the highest content (1,793 mg/kg) at 8 h, which was 1.0-1.8 times higher in Korean conventional seed ginger than that in Chinese seed ginger. These experiments provide valuable data supporting the excellence of Korean conventional seed ginger in the future.

• Applied Chemistry for Engineering
• /
• v.21 no.2
• /
• pp.148-153
• /
• 2010

This study was carried out to investigate the effect of extraction methods on the physicochemical characteristics using seed oil of wild green tea (Camellia sinensis). When the solvent extraction method after grinding and steam treatment (SGS) was used for oil extraction, the yield was highest. The specific gravity was a range of $0.91{\sim}0.94g/cm^{3}$ irrespective of extraction methods of oil. However, the light in the solvent extraction method after grinding (SG), the red in the pressure extraction method after grinding and roasting treatment (PGR), and the yellow in SG method were highest. Among various fatty acids, the concentrations of C16 : 0, C18 : 1 and C18 : 2 were highest, irrespective of extraction methods. Especially, the C16 : 0 concentration was in the order of SG (34.78%), SGS (23.04%), and PRGS method (23.01%), the C18 : 1 concentration was in the order of PGR (43.35%), SGS (42.7%), SG method (39.0%), and in the case of C18 : 2, it was in order of PGR (23.15%), SGS (23.03%), and SG method (15.01%). The saturated fatty acid concentration was in the order of SG (40.59%), PGR (31.61%), and SGS method (30.1%). On the other hand, in the case of the unsaturated fatty acid, it was in the order of SGS (69.9%), PGR (68.39%), and SG method (59.41%). The acid values in the SGS and SG method after 10 days of storage were in the range of 6~8 mgKOH/g. However, in the case of PGR method, it was increased with the increase of storage time and was 49.3 mgKOH/g after 60 days. The peroxide values in the SGS and SG method were in the range of 60~100 mEq/g from 10 to 60 days of storage. On the other hand, when the storage time was increased from 10 to 30 days, it was sharply increased from 60 to 240 mEq/g. The rancidity was in the order of $Fe^{2+}$, $Cu^{2+}$, $Cr^{2+}$, $Zn^{2+}$ and $Ni^{2+}$, irrespective of extraction methods. Especially, when butylated hydroxyanisole (BHA) was added into oil containing 1.0 ppm of <$Fe^{2+}$, the peroxide value was decreased from 539.4 to 216.6%. These results show that seed oil of Camellia sinensis grown in Iksan can be applied as sources for cosmetics, detergents, food, and pharmaceuticals.

• Korean journal of food and cookery science
• /
• v.23 no.6
• /
• pp.919-929
• /
• 2007

In this study, we applied a steam treatment to black sesame to determine the optimum treatment conditions, and also examined the antioxidant effects and quality characteristics. For black sesame gruels, roasting can be used in a variety of ways in cooking to enhance functionality and preference. We found that the solid content increased with the addition of 70% steamed black sesame in the glutinous rice-black sesame gruel samples, and for glutinous black rice-black sesame gruels, solid content was highest with the addition of 50% steamed black sesame. For the chromaticity, the L-value decreased as the addition of steamed black sesame increased in all the black sesame gruels made with the steamed black sesame. With regard to texture, the cohesiveness, springiness, gumminess, chewiness, and adhesiveness of the gruels made with steamed black sesame were highest when 60% steamed black sesame was added. The results of the sensory test showed that overall preference was highest for the glutinous rice-black sesame gruel made with 60% steamed black sesame, while the glutinous brown rice-black sesame gruels were preferred with 60% and 70% additions, and the glutinous black rice-black sesame gruel was deemed best with 60% steamed black sesame. The most appropriate ratios of steamed black sesame in the black sesame gruels, with regard to overall quality, are as follows: 60% steamed black sesame for the glutinous rice-black sesame gruel, 60% and 70% steamed black sesame for the glutinous brown rice-black sesame gruel, and 60% steamed black sesame for the glutinous black rice-black sesame gruel.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2010

Recently, the treatment of dead poultry has become more important issue because, the infected poultry, which was buried under the ground, causes environmental contaminations such as steep water and reek occurrence, etc. Therefore, in this study, we investigated the type of treatment and the composting methods influencing to the characteristics on decomposition and fermentative disinfection of dead poultry with poultry manure and sawdust. The results of the port tests showed that amputated poultry treated by the cut-sterilization were not only more decomposed, with less smell compared to the non-treated poultry carcass. When we treated thermophilic microorganism such as bacillus in this amputated poultry, the temperature of treated poultry increased much fester, the fermentation temperature didn't rise and not maintained constantly for long time due to the small size of the fermentation port. On the other hand, we did fermentation test by the layered disposal method with more poultry. In this experiment, the temperature of fermented poultry rose to $54^{\circ}C$ in a day and maintained around $55^{\circ}C$ during four weeks period. With less odor outside the experiment room. further. Also, we inoculated AI virus, ND virus in the excrement for studying the effect of fermentative disinfection. The result of the test revealed that AI virus was destructed within 60 minutes and ND virus was destructed within 30 minutes at the temperature of $56^{\circ}C$. Therefore, the investigations revealed scope of composting method for steam sterilized infected poultry in the originated area mixed with poultry manure, sawdust by thermophilic microorganism could increase the effectiveness of fermentative disinfection and decrease the environmental contamination.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.1
• /
• pp.19-62
• /
• 1985

This study was performed to investigate: (i) the bending processing properties of silk worm oak (Quercus acutissima Carr.) and Korean red pine (Pinus densiflora S. et Z.) by boiling and steaming treatments; (ii) the effects of interrelated factors - sapwood and heartwood, annual ring placement, softening temperature and time, moisture content. and wood defects on bending processing properties; (iii) the changing rates of bending radii after release from a tension strap, and (iv) the improving methods of bending process by treatment with chemicals. The size of specimens tested was $15{\times}15{\times}350mm$ for boiling and steaming treatments and $5{\times}10{\times}200mm$ for treatments with chemicals. The specimens were green for boiling treatments and dried to 15 percent for steaming treatments. The specimens for treatments with chemicals were soaked in saturated urea solution, 35 percent formaldehyde solution, 25 percent polyethylene glycol -400 solution, and 25 percent ammonium hydroxide solution for 5 days and immediately followed the bending process, respectively. The results obtained were as follows: 1. The internal temperature of silk worm oak and Korean red pine by boiling and steaming time was raised slowly to $30^{\circ}C$ but rapidly from $30^{\circ}C$ to $80-90^{\circ}C$ and then slowly from $80-90^{\circ}C$ to $100^{\circ}C$. 2. The softening time required to the final temperature was directly proportional to the thickness of specimen. The time required from $25^{\circ}C$ to $100^{\circ}C$ for 15mm-squared specimen was 9.6-11.2 minutes in silk worm oak and 7.6-8.1 minutes in Korean red pine. 3. The moisture content (M.C.) of specimen by steaming time was increased rapidly first 4 minutes in the both species, and moderately from 4 to 20 minutes and then slowly and constantly in silk worm oak, and moderately from 4 to 15 minutes and then slowly and constantly in Korean red pine. The M.C. of 15mm-squared specimen in 50 minutes of steaming was increased to 18.0 percent in the oak and 22.4 percent in the pine from the initial conditioned M.C. of 15 percent The rate of moisture adsorption measured was therefore faster in the pine than in the oak. 4. The mechanical properties of the both species were decreased significantly with the increase of boiling rime. The decrement by the boiling treatment for 60 minutes was measured to 36.6-45.0 percent in compressive strength, 12.5-17.5 percent in tensile strength, 31.6-40.9 percent in modulus of rupture, and 23.3-34.6 percent in modulus of elasticity. 5. The minimum bending radius (M.B.R.) of sapwood and heartwood was 60-80 mm and 90 mm in silk worm oak, and 260 - 300 mm and 280 - 300 mm in Korean red pine, respectively. Therefore, the both species showed better bending processing properties in sapwood than in heartwood. 6. The M.B.R. of edge-grained and flat-grained specimen in suk worm oak was 60-80 mm, but the M.B.R. in Korean red pine was 240-280 mm and 260-360 mm, respectively. Comparing the M.B.R. of edge-grained with flat-grained specimen, in the pine the edge-grained showed better bending processing property than the flat-grained. 7. The bending processing properties of the both species were improved by the rising of softening temperature from $40^{\circ}C$ to $100^{\circ}C$. The minimum softening temperature for bending was $90^{\circ}C$ in silk worm oak and $80^{\circ}C$ in Korean red pine, and the dependency of softening temperature for bending was therefore higher in the oak than in the pine. 8. The bending processing properties of the both species were improved by the increase of softening time as well as temperature, but even after the internal temperature of specimen reaching to the final temperature, somewhat prolonged softening was required to obtain the best plastic conditions. The minimum softening time for bending of 15 mm-squared silk worm oak and Korean red pine specimen was 15 and 10 minutes in the boiling treatment, and 30 and 20 minutes in the steaming treatment, respectively. 9. The optimum M.C. for bending of silk worm oak was 20 percent, and the M.C. above fiber saturation point rather degraded the bending processing property, whereas the optimum M.C. of Korean red pine needed to be above 30 percent. 10. The bending works in the optimum conditions obtained as seen in Table 24 showed that the M.B.R. of silk worm oak and Korean red pine was 80 mm and 240 mm in the boiling treatment, and 50 mm and 280 mm in the steaming treatment, respectively. Therefore, the bending processing property of the oak was better in the steaming than in the boiling treatment, but that of the pine better in the boiling than in the steaming treatment. 11. In the bending without a tension strap, the radio r/t of the minimum bending radius t to the thickness t of silk worm oak and Korean red pine specimen amounted to 16.0 and 21.3 in the boiling treatment, and 17.3 and 24.0 in the steaming treatment, respectively. But in the bending with a tension strap, the r/t of the oak and the pine specimen decreased to 5.3 and 16.0 in t he boiling treatment, and 3.3 and 18.7 in the steaming treatment, respectively. Therefore, the bending processing properties of the both species were significantly improved by the strap. 12. The effect of pin knot on the degradation of bending processing property was very severe in silk worm oak by side, e.g. 90 percent of the oak specimens with pin knot on the concave side were ruptured when bent to a 100 mm radius but only 10 percent of the other specimens with pin knot on the convex side were ruptured. 13. The changing rate in the bending radius of specimen bent to a 300 mm radius after 30 days of exposure to room temperature conditions was measured to 4.0-10.3 percent in the boiling treatment and 13,0-15.0 percent in the steaming treatment. Therefore, the degree of spring back after release was higher in the steaming than in the boiling treatment. And the changing rate of moisture-proofing treated specimen by expoxy resin coating was only -1.0.0 percent. 14. Formaldehyde, 35 percent solution, and 25 percent polyethylene glycol-400 solution found no effect on the plasticization of the both species, but saturated urea solution and 25 percent ammonium hydroxide solution found significant effect in comparison to non-treated specimen. But the effect of the treatment with chemicals alone was inferior to that of the steaming treatment, and the steaming treatment after the treatment with chemicals improved 10-24 percent over the bending processing property of steam-bent specimen. 15. Three plasticity coefficients - load-strain coefficient, strain coefficient, and energy coefficient - were evaluated to be appropriate for the index of bending processing property because the coefficients had highly significant correlation with the bending radius. The fitness of the coefficients as the index was good at load-strain coefficient, energy coefficient, and strain coefficient, in order.