• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.195-206
• /
• 1997

In this study, a simulation tool is developed in order to investigate non steadystate cornering performance of 4WD/4WS vehicles. The 4WD/4WS vehicles are modeled as a 8-th order dynamic system which includes complex non-linear vehicle dynamics and tire models. The vehicle models are constructed into a modulated simulation tool and are utilized for analyzing cornering performance such as combined braking and steering, cornering on the icy read and $\mu$-split braking, The whole analysis is done with the simulation tool which consists of a number of subsystems and offers graphic environment. Simulation results show that this tool is useful and cost-effective in the dynamic analysis of the combustion-engine vehicles as well as electrically driven vehicles.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.121-127
• /
• 2013

In this study, suspension geometry is controlled to improve vehicle handling performance. The toe and camber of the rear suspension is controlled independently by using a double knuckle structure designed to enhance the vehicle cornering stability. Camber and toe changes in the rear wheel during high speed turning maneuver are important factors that influence the vehicle stability. Toe in the rear outer wheel plays a dominant role in cornering. A control algorithm for the camber and the toe angle input is developed to carry out the control simulation of the vehicle such as single lane change, the steady state cornering, the double lane change and the step steering simulation. Effects of the camber and toe angle control are analyzed from the computer simulations. A double lane change simulation revealed that the suspension mechanism with variable camber angle and variable toe angle decreases the peak body slip angle and peak yaw rate, 50% and 10%, respectively.

• 한국융합학회논문지
• /
• 제3권4호
• /
• pp.35-44
• /
• 2012

본 연구에서 모사 프로그램이 6WD/6WS를 가진 특수 목적 차량의 비정상상태 코너링 성능을 조사하기 위해 개발되었다. 6WD 차량은 비포장 도로에서 작전을 수행하기 좋은 성능을 가지고 있고 안전한 성능을 가진 것으로 신뢰받고 있다. 그러나, 6WS 차량들의 코너링 성능은 관련 문헌을 통해서는 언뜻 이해가 어렵다. 본 논문에서는 6WD/6WS 차량들은 비선형 차량 동력학, 타이어 모델, 운동학적 효과 등을 포함한 18 자유도 시스템으로 모델링 되었다. 그리고 그 차량 모델은 입/출력과 차량변수가 수식화된 접근 방법으로 쉽게 변환될 수 있도록 MATLAB/SIMULINK를 사용한 모사 프로그램으로 구성되었다. 6WS 차량의 코너링 성능은 브레이크 휠과 피봇팅 각각으로 해석되었다. 모사 결과들을 보면, 코너링 성능은 전후 휠 조향 뿐만이 아니라 중간 휠 조향에 따라 좌우됨을 보여준다. 덧붙여, 새로운 6WS 제어법칙은 측면 미끄러짐 각을 최소화하기 위해 제안되었다. 차량변경 모사 결과들은 제안된 제어법칙의 6WS 차량의 장점을 보여준다.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.100-105
• /
• 2002

In order to investigate how the chassis frame stiffness including body structure affects vehicle handling characteristics, in this paper, objective test evaluations such as steady state circle maneuvering test and pulse input transient test are performed. The basic steer characteristics can be obtained from stability factor and 4 parameter method is used to evaluate vehicle handling characteristics between original vehicle and the other with reinforced chassis. The result shows that vehicle with reinforced chassis has advantages in handling characteristics.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.547-554
• /
• 2006

This paper is concerned with an optimal control suspension system using the preview information of road input based on a quarter car model. The main purpose of the control is to combine good vibration isolation characteristics with improved attitude control. The optimal control law is derived with the use of calculus of variation, consisting of three parts. The first part is a full state feedback term that includes integral control acting on the suspension deflection to ensure zero steady-state deflection in response to static body forces and ramp road inputs. The second part is a feed-forward term which compensates for the body forces when they can be detected, and the third part depends on previewed road input. The performance of the suspension is evaluated in terms of frequency domain characteristics and time responses to ramp road input and cornering forces. The effects of each part of the suspension controller on the system behavior are examined.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 춘계학술대회
• /
• pp.31-32
• /
• 2022

초기의 선박들은 선회시 킥현상 등을 설명하고 대응하는 선박의 전복예방을 위한 정확한 방정식이 제공되지 못했다. 육상에서는 차량의 정상상태 선회방정식을 이용한 전복예방 기술이 많이 개발되었고 이는 해상에서의 기존의 방법들 보다 더 좋은 성능을 보였다. 이 논문에서는 더 정확한 선박의 선회시 전복방지를 위해 애커만 기하학 모델 기반 선회방정식을 이용하여 선박선회시 복원을 하는 방법을 제안하여 선박안전관리 방안을 향상시킨다.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.34-44
• /
• 1998

It is clear that when an automobile negotiates a curve the lateral acceleration causes an increase in tire normal load for the wheels on the outside of the curve and a decrease in load for the inside wheels. However, just how the details of the suspension linkages and the parameters of the springs and shock absorbers affect the dynamics of the load transfer os not easily understood. One even encounters the false idea that since it is the compression and extension of the main suspension springs spring body role which largely determines the changes in normal load, of roll could be reduced, the load transfer would also be reduced. Using free body diagrams, one can explain quite clearly how the load is transferred for steady state cornering, and, using complex multibody models of particular vehicles one can simulate in good fidelity how load transfer occurs dynamically. Here we adopt a middle ground by using the concept of roll center and using a series of half-car bond graph models to point out main effects. Since bond graph junction structures automatically and consistently constrain geometric and force variables simultaneously, they can be used to point out hidden assumptions of other simplified vehicle models.

• 한국자동차공학회논문집
• /
• 제9권1호
• /
• pp.139-147
• /
• 2001

In this study a path control scheme of simulation models of various vehicles to evaluate their handling characteristic is developed. Based on the forward target method, path deviation error is estimated and the required steering effort to reduce the error is computed by Ziegler-Nichols PID control rule. Velocity control model is also included in the proposed path control scheme to achieve the desired velocity. The path control scheme is implemented on a full vehicle model to perform ISO test procedures, such as steady state cornering, lane change, and sinusoidal input, etc. Through the simulations of ISO test procedures and comparison with actual tests, effectiveness and validity of the path control model is demonstrated.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.109-118
• /
• 1995

This paper presents a mathematical vehicle model to analyze the dynamic characteristics of a vehicle undergoing braking in a turn. Two kinds of field tests, braking in a steady state turn and braking in a J-turn are performed. Computer simulation results are compared with test results and the braking effect on a vehicle cornering behavior is examined. Also, sensitivity analysis is applied to determine the effect of design parameter changes on the response of vehicle dynamic system.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.186-193
• /
• 1999

In this paper, a full vehicle model is developed to analyze toe and camber changes due to rack height variation and compliance. The AutoDyn7 program developed in G7 project is used for the computer simulation. Steady state cornering test was done to find the understeer gradient. Imposing a pulse steer input, Frequency Response Function(FRF) of yaw rate and lateral accelerations were evaluated. To verify the stability, the rhombus using four parameters is employed. Steer characteristics were evaluated by changing the rack height and the bushing lateral stiffiness. which installed between the low control arm and the chassis.