• Journal of Astronomy and Space Sciences
• /
• 제2권2호
• /
• pp.153-174
• /
• 1985

The one of critical factor in gas turbine engine performance is high turbine inlet gas temperature. Therefore, the turbine rotor has so many problems which must be considered such as the turbine blade cooling, thermal stress of turbine disk due to severe temperature gradient, turbine rotor tip clearance, under the high operating temperature. The purpose of this study is to provider the temperature distribution and heat flux in turbine disk which is required to considered premensioned problem by the Finite Difference Method and the Finite Element Methods on the steady state condition. In this study, the optimum aspect ratio of turbine disk was analysed for various heat conductivity of turbine disk material by Finite Difference Method, and the effect of laminating method with high conductivity materials to disk thickness direction by Finite Element Methods in order to cool the disk. The laminating method with high conductivity material on the side of the disk is effective.

• Journal of the Korean Wood Science and Technology
• /
• 제19권4호
• /
• pp.52-61
• /
• 1991

In this paper, the difference of the property of absorption and desorption for five species in semi-steady state are studied. The species used are listed in Table 1 and the dimension of specimen was $8\times8{\times}T$(Tangential direction)cm and tested in various conditions. A change of average moisture content with time were measured in each cycles. The results obtained are summarized as follows. When the relative humidity in air was maximum or minimum, the distribution of moisture In wood of all specimens were illustrated by exponential curves of decrease or increased from lace 10 center of wood. From the consideration of coefficient of decrease(C), the amount of moisture change of spruce was larger than the others. The pheonomenon was considered no relation to the specific gravity in air dry, but the wood structures. The velocity of the absorption and desorption for species decreased in the order spruce(Picea sitchensis) neodobam(Fagus crenata), solsong(Tsuga heterophylla), meranti(Shorea sp.) and kaesoo(Cercidiphyllum japoicum). In case of constant temperature and water vapor pressure is changed. the amount of absorbed moisture was larger than that of constant water vapor pressure and temperature vaned. In this fact, it is considered that the property of sorption of wood is strongly influenced by vapor pressure gradient than temperature gradient.

• 한국소음진동공학회논문집
• /
• 제16권10호
• /
• pp.1057-1066
• /
• 2006

Acoustic streaming Induced by longitudinal vibration at 30 kHz is visualized for a test fluid flow between the stationary glass plate and ultrasonic vibrating surface with particle imaging velocimetry (PIV) To measure an increase in the velocity of air flow due to acoustic streaming, the velocity of air flow in a gap between the heat source and ultrasonic vibrator is obtained quantitatively using PIV. The ultrasonic wave propagating into air in the gap generates steady-state secondary vortex called acoustic streaming which enhances convective cooling of the stationary heat source. Heat transfer through air in the gap is represented by experimental convective heat transfer coefficient with respect to the gap. Theoretical analysis shows that gaps for maximum heat transfer enhancement are the multiple of half wavelength. Optimal gaps for the actual design are experimentally found to be half wavelength and one wavelength. A drastic temperature variation exists for the local axial direction of the vibrator according to the measurement of the temperature distribution in the gap. The acoustic streaming velocity of the test fluid in the gap is at maximum when the gap agrees with the multiples of half wavelength of the ultrasonic wave, which are specifically 6 mm and 12 mm.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.

• 한국해안해양공학회지
• /
• 제2권2호
• /
• pp.67-74
• /
• 1990

임의의 해안구조물 설치에 의한 해안선변형을 예측하기 위한 수치모형을 개설하였다. 본 모형은 파랑변형의 계산에 있어서 이안제, 돌제 등과 같은 차폐구조물과 산제 등과 같은 구조물에도 적용할수 있도록 파랑의 굴절ㆍ회절을 고려한 정상상태의 완경사방정식과 굴절, 회절 및 천수계수 산정에 의한 파향선법을 병용하였다. 임의 구조물에 대한 적용결과, 전형적인 해안선변형의 계산결과를 보였으며, 연안방향의 파고분포에 따라 매우 민감한 반응을 보였다. 본 모형의 현지해안에의 적용결과, 복잡한 지형과 해안구조물 주변에서도 적용이 가능한 것으로 나타났다.

• 한국통신학회논문지
• /
• 제23권9A호
• /
• pp.2305-2312
• /
• 1998

본 논문에서는 Virtual Cellular Network(VCN)을 사용하는 무선 통신망에서 음성 패킷의 지연 특성을 분석하였다. 주기적으로 발생하는 음성 패킷이 슬롯-알로하 프로토콜로 전송될 때의 전송 특성을 Markov Chain으로 모델링하여 정상 상태(steady state)에서의 지연 확률 분포를 구하였고, 무선 채널의 평균 수신확률(prbability of capture), 재전송 방식 등이 성능에 미치는 영향을 분석하였다. 이를 위하여 무선 단말기의 수신 확률의 변화에 따른 음성 패킷의 전송 지연 누적 확률 함수를 구하였다. 재전송 방식의 평균 backoff 시간이 성능에 미치는 영향을 알아보기 위해 음성 패킷 발생 주기(N 슬롯시간)당 평균 재전송 횟수, NPr을 파라미터로 정의하였으며 여러가지의 프레임 크기 N에 대하여 1% outage delay를 비교하였다. 성능 실험 결과 NPr의 최적의 범위는 4~7임을 알 수 있었다. 따라서 프레임 크기 N이 주어졌을 때의 재전송 시도 확률 Pr을 구할 수 있다. 또한 전송큐의 크기가 유한함으로써 발생하는 blocking 확률과 전송큐의 적절한 크기를 구하였다.

• Journal of Communications and Networks
• /
• 제16권2호
• /
• pp.193-201
• /
• 2014

In cognitive radio networks, the packet transmissions of the secondary users (SUs) can be interrupted randomly by the primary users (PUs). That is to say, the PU packets have preemptive priority over the SU packets. In order to enhance the quality of service (QoS) for the SUs, we propose a spectrum access strategy with an ${\alpha}$-Retry policy. A buffer is deployed for the SU packets. An interrupted SU packet will return to the buffer with probability ${\alpha}$ for later retrial, or leave the system with probability (1-${\alpha}$). For mathematical analysis, we build a preemptive priority queue and model the spectrum access strategy with an ${\alpha}$-Retry policy as a two-dimensional discrete-time Markov chain (DTMC).We give the transition probability matrix of the Markov chain and obtain the steady-state distribution. Accordingly, we derive the formulas for the blocked rate, the forced dropping rate, the throughput and the average delay of the SU packets. With numerical results, we show the influence of the retrial probability for the strategy proposed in this paper on different performance measures. Finally, based on the trade-off between different performance measures, we construct a cost function and optimize the retrial probabilities with respect to different system parameters by employing an iterative algorithm.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.18-30
• /
• 1999

A heat transfer analysis for the two-dimensional (2-D) steady state using finite difference method (FDM) is performed to predict the thermal behavior of the primary first-wall (FW) system of fusion reactor under various geometric and thermo-hydraulic conditions, such as the beryllium (Be) armor thickness, pitch of cooling tube, and coolant velocity. The FW consists of authentic steel (type 316 stainless steel solution annealed) for cooling tubes, Cu for cooling tubes embedding material, and Be for a protective armor, based on the International Thermonuclear Experiment Reactor (ITER) report. The present 2-D analysis, the control volume discretized with hybrid grid (rectangular grid and polar grid) and Gauss-Seidel iteration method are adapted to solve the governing equations. In the present study, geometric and thermo-hydraulic parameters are optimized with consideration of several limitations. Consequently, it is suggested that the adequate pitch of cooling tube is 22-32mm, the beryllium armor thickness is 10-12mm, and that the coolant velocity is 4.5m/s-6m/s for $100^{\circ}C$ of inlet coolant temperature. The cooling tube should locate near beryllium armor. But, it would be better for locating the center of Cu wall, considering problems of material and manufacturing. Also, 2-D analysis neglecting the axial temperature distribution of cooling tube is appropriate, regarding the discretization error in axial direction.

• 약학회지
• /
• 제45권2호
• /
• pp.153-160
• /
• 2001

This research developed an intravenous (IV) vancomycin dosing nomogram based on the clinical pharmacokinetic data of Korean adult patients. Total 99 pairs of steady-state peak and trough serum concentrations of vancomycin were obtained from 73 adult patients in a tertiary general hospital. Serum vancomycin concentrations were determined to assess the appropriateness of initial vancomycin dosing. Only 47.2% of the cases were within therapeutic range. To characterize the clinical pharmacokinetics (PK) of vancomycin, PK parameters including elimination rate constant ( $K_{e}$) half-life( $T_{1}$2/), clearance (C $l_{van}$), volume of distribution ( $V_{d}$) were calculated by using one-compartment, first order pharmacokinetic equations. PK parameters were evaluated based on the differences of patients'renal function and age. Regression analysis showed a significant correlation between C $l_{van}$ and $C_{cr}$ (C $l_{van}$ = -1.89+0.914 $C_{cr}$ , r=0.763) and between $K_{e}$ and $C_{cr}$ , ( $K_{e}$=-0.0037+0.00139 $C_{cr}$ =0.724). The relationship between $K_{e}$ and $C_{cr}$ , and the mean $V_{d}$ were utilized for developing the nomogram to individualize the initial dosing regimen of vancomycin for the patients with various degrees of renal functions. The nomogram may be used as an efficient tool to determine safe and effective doses of vancomycin for the Korean adult patients.nts.nts.nts.s.nts.

• Nuclear Engineering and Technology
• /
• 제29권6호
• /
• pp.459-467
• /
• 1997

The steady-state behavior of recycling neutral atoms in a tokamak edge region has been analyzed through a two-dimensional Monte Carlo simulation. A particle tracking algorithm used in earlier research on the neutral particle transport is applied to this Monte Carlo simulation in order to perform more accurate calculations with the EDGETRAN code which was previously developed for a two-dimensional edge plasma transport in the authors' laboratory. The physical model of neutral recycling includes charge-exchange and ionization interactions between plasmas and neutral atoms. The reflection processes of incident particles on the device wall are described by empirical formulas. Calculations for density, energy, and velocity distributions of neutral deuterium-tritium atoms have been carried out for a medium-sized tokamak with a double-null configuration based on the KT-2 conceptual design. The input plasma parameters such as plasma density, ion and electron temperatures, and ion fluid velocity are provided from the EDGETRAN calculations. As a result of the present numerical analysis, it is noticed that a significant drop of the neutral atom density appears in the region of high plasma density and that the similar distribution of neutral energy to that of plasma ions is present as frequently reported in other studies. Relations between edge plasma conditions and the neutral recycling behavior are discussed from the numerical results obtained herein.