• Proceedings of the KIEE Conference
• /
• 2000.11b
• /
• pp.352-354
• /
• 2000

The induction motor is a high-efficiency machine when working close to its rated operation point. This paper uses a simple induction motor model that includes iron losses. The model, which only requires the knowledge of conventional induction motor parameters, is referred to a field-oriented frame. At steady-state light-load condition the minimum point of the input power can be found with the condition that it is possible to obtain the same torque with different combinations of flux and current values. Using the minimum point. the drive system with the proposed efficiency optimization controller can be controlled easily. Simulation and experimental results show the effectiveness of the control strategy proposed for an induction motor drive.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.187-190
• /
• 2008

The water quality at the Dongbin Harbor at Pohang city, is getting worse due to the sewage and the wastewater from communities. In this syudy, RMA2 and RMA4, which is two-dimensional depth-averaged finite element numerical model, were employed to simulate the improvement of water quality from inflowing water through an inland canal to be planned connecting Dongbin Harbor and the Hyeongsan River. For the comparative result of the numerical model, both the present condition and the restoration condition (after construction of an inland canal) is simulated. The results of these conditions reasonably simulate a real situation at the Dongbin Harbor. After construction of an inland canal, the water quality at the Dongbin Harbor will be compared to the fresh water quality of the Hyeongsan River at the steady state. Futhermore, The result of simulation will be used to decide the most effective dimension of the canal.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1002-1004
• /
• 2005

This paper describes the performance analysis and design of single-phase self-excited induction generators. In this study, it is proposed to design the proper capacitance for self-excitation and voltage regulation, also. This methods are based on the induced MMF equations between main and the auxiliary winding. For the least influence between the two capacitors, the self-excited capacitor is selected under no load condition, while the series capacitor is designed under loaded condition. For the steady state analysis, the equivalent circuit of single-phase induction generators is used as circuit modeling using the double-revolving field theory. The validity of proposal methods and designed generator system will be confirmed by experimental and computed results.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.334-339
• /
• 2001

The nonlinear vibration characteristics of hydrodynamic journal bearings with a circumferentially groove are analyzed numerically when the external sinusoidal disturbances are given to the rotor-bearing system continuously. Also, the cavitation algorithm implementing the Jakobsson-Floberg-Olsson boundary condition is adopted to predict cavitation regions in the fluid film more accurately than conventional analysis which uses the Reynolds condition. It is found that the difference between linear and nonlinear analysis is much more remarkable as the amplitude of external disturbance increases, and it depends upon the excitation frequency of external disturbance. It is also shown that the cavity region in the fluid film is increased as the amplitude or excitation frequency of external disturbance increases. The whirling center of the steady state orbit moves closer to the bearing center as the amplitude or the excitation frequency of the external disturbance increases because of smaller range of full film region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1621-1628
• /
• 2004

This paper proposes a design methodology for the robust observer using the eigenstructure assignment in multi-output systems so that the observer is less sensitive to the ill-conditioning factors such as unknown initial estimation error, modeling error and measurement bias in transient and steady-state observer performance. The robustness of the observer can be achieved by selecting the desired eigenvector matrix to have a small condition number that guarantees the small upper bound of the estimation error. So the left singular vectors of the unitary matrix spanned by space of the achievable eigenvectors are selected as a desired eigenvectors. Also, this paper proposes how to select the desired eigenvector based on the measure of observability and designs the observer with small gain. An example of a spindle drive system is simulated to validate the robustness to the ill-conditioning factors in the observer performance.

• Journal of Applied Reliability
• /
• v.16 no.4
• /
• pp.295-304
• /
• 2016

Purpose: This paper presents an application of Markov Process to reliability and availability analysis. In order to do that of analysis, we set up a specific case of Tablet PC and it's usage scenario. The case has it some spares and maintenance and repair processes. Methods: Different configurations of the tablet PC and as well as their functions are defined. The system configuration and calculated failure rates of components are modeled from Windchill Quality Solution. Two models, without a spare and with spare, are created and compared using Markov Process. The Matlab numerical analysis is used to simulate and show the change of state with time. Availability of the system is computed by determining the time the system stays in different states. Results: The mission availability and steady-state condition availability in accordance with the mission are compared and the availability of the system with spares have improved availability than without spares. Simulated data shows that downtime of the system increased which results in greater availability through the consideration of spares. Conclusion: There's many techniques and methods to do reliability and availability analysis and mostly are time-independent assumptions. But Markov Process, even though its steady-state and ergodic properties, can do time analysis any given time periods.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.186-189
• /
• 2019

The technique named CORD is an algorithm that optimizes resources of Data Service Platform(DSP) in real time, and it has been developed for enhancing operability of DSP of Korean e-Navigation Project performed by Hanwha Systems and Ministry of Oceans and Fisheries(MOF) since 2016. It plays a critical role to recognize the state of DSP in early time and handling problems immediately when it occurs logical, physical error in order to make DSP steady state condition, which has something in common with maximizing operability of DSP and seamless maritime service to various ships in the sea. Therefore, as developing a noble technique that makes DSP steady state by diagnosing resource and operation status of DSP as well as by reconfiguring service queue optimally in real time, DSP can have shorter response time and higher chance of providing proper maritime service to ships in voyage.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.5
• /
• pp.1027-1037
• /
• 2019

Conventional cyber-attack detection solutions are generally based on signature-based or malicious behavior analysis so that have had difficulty in detecting unknown method-based attacks. Since the various information occurring all the time reflects the state of the system, by modeling it in a steady state and detecting an abnormal state, an unknown attack can be detected. Since a variety of system information occurs in a string form, word embedding, ie, techniques for converting strings into vectors preserving their order and semantics, can be used for modeling and detection. Novelty Detection, which is a technique for detecting a small number of abnormal data in a plurality of normal data, can be performed in order to detect an abnormal condition. This paper proposes a method to detect system anomaly by cyber attack using embedding and novelty detection.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.869-874
• /
• 2019

Performing preventive maintenance on a system reduces unexpected downtime caused by system aging and increases its availability. In general, preventive maintenance can be largely divided into two broad categories: time-based maintenance policy and condition-based maintenance policy. In the time-based maintenance policy the preventive maintenance is triggered at scheduled time epochs with fixed time intervals, while in the condition-based maintenance policy the preventive maintenance is performed when system state is checked to satisfy a specific condition. Condition-based maintenance has some benefits in improving maintenance efficiency, compared to time-based one. This paper presents a stochastic model for analyzing a system with condition-based preventive maintenance, where the preventive maintenance is performed after a random time since the system aging occurs, and provides an analytical solution for the steady-state availability and the corresponding profit.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2797-2802
• /
• 2007

It has been confirmed that implementation of the no-slip boundary conditions for the lattice-Boltzmann method play an important role in the overall accuracy of the numerical solutions as well as the stability of the solution procedure. We in this paper propose a new algorithm, i.e. the method of the dynamic boundary condition for no-slip boundary condition. The distribution functions on the wall along each of the links across the physical boundary are assumed to be composed of equilibrium and nonequilibrium parts which inherit the idea of Guo's extrapolation method. In the proposed algorithm, we apply a dynamic equation to reflect the computational slip velocity error occurred on the actual wall boundary to the correction; the calculated slip velocity error dynamically corrects the fictitious velocity on the wall nodes which are subsequently employed to the computation of equilibrium distribution functions on the wall nodes. Along with the dynamic selfcorrecting process, the calculation efficiently approaches the steady state. Numerical results show that the dynamic boundary method is featured with high accuracy and simplicity.