• 품질경영학회지
• /
• 제19권1호
• /
• pp.129-140
• /
• 1991

This paper deals with on (S-1, S) spare-part inventory model for multi-stage machine repair problem with attrition. The steady-state availability of the system is maximized under some constraints such as total cost, available space etc.. The problem is formulated as a closed queueing network and the system availability is calculated by Buzen's computational algorithm. In order to find the optimal numbers of spare units and repair channels for each operating stage, the problem is formulated as a non-linear integer programming(NLIP) problem and an efficient algorithm. which is a natural extension of the new Lawler-Bell algorithm of Sasaki et el., is used to solve the NLIP problem. A numerical example is given to illustrate the algorithm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.539-544
• /
• 2004

In this paper, we present reliability modeling and analysis method of the Automated Guideway Transit(AGT) vehicle system using analytical models, based on Markov Chains. The Markov model can express state transition of the AGT vehicle sys. that is considered to be in one of four states, such as basic operating (0), minor delay(1), major delay(2) and non-operating(3) state. The proposed Markov model is illustrated with a numerical example and cases to find a steady state availability, MTBF(mean time between failures), and MTTR(mean time to repair) under specified failure and repair rate arc demonstrated.

• 한국정보통신학회논문지
• /
• 제23권7호
• /
• pp.869-874
• /
• 2019

노화에 의한 시스템의 예기치 않은 장애 발생은 예방 관리 기능을 수행함으로써 줄일 수 있으며, 이를 통해 시스템의 가용도를 높일 수 있다. 예방 관리 기법은 크게 시간 기반과 조건 기반의 두 가지로 나눌 수 있다. 시간 기반 방식은 정해진 시간 간격마다 수행되고, 조건 기반 방식은 시스템 상태가 특정 조건을 만족할 때 수행된다. 조건 기반 방식은 시간 기반 방식과 비교했을 때 예방 관리의 효율성을 향상시킬 수 있다는 장점이 있다. 본 논문은 노화 상태에서 일정 시간이 지난 후 예방 관리를 수행하게 되는 시스템을 분석할 수 있는 확률 모형을 제시한다. 제시한 모형은 현실적인 상황을 반영하여 비 마르코비안 모형으로 모델링한다. 해당 확률 모형을 수학적으로 해석하여 정상 상태에서의 시스템 가용도와 수익을 분석한다.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.453-459
• /
• 2020

모든 개발 무기체계는 원활한 작전운용을 위해 임의의 시간에 정상상태로 운용될 수 있는 확률을 높이는 것이 중요하다. 종합군수지원(Integrated Logistics Support, ILS)에서는 이 확률을 운용 가용도라고 하며, 개발 과정에서 해당 수치를 정량화하여 제시한다. 무기체계의 성공적인 개발을 위해 운용 가용도를 향상시킬 수 있는 방안은 여러 가지가 있다. 그 중 하나의 방안은 자동화시험장비(ATE)를 통해 수행하는 고장정비시간을 줄이는 것이다. 최근 방산시장에서의 고객은 이러한 점을 인식하고 무기체계 운용 가용도 향상을 위한 방안을 요구하고 있다. 그러므로 이 논문에서는 자동화시험장비 운용방식을 변경하여 무기체계의 운용 가용도를 향상시킬 수 있는 방안을 제시한다. 그 구체적인 방안은 야전정비요원이 야전정비지원을 부대에서 수행할 수 있도록 하는 것이다. 이는 대상품 시험을 위한 야전정비요원의 이동시간을 줄임으로써 무기체계 총 고장정비시간(Total Corrective Maintenance Time, TCM)을 감소시킬 수 있는 효과적인 방안이다. 제안된 자동화시험장비는 기존 대비 뛰어난 정비도 및 운용 가용도를 달성할 수 있음을 입증하였다.

• International Journal of Reliability and Applications
• /
• 제13권1호
• /
• pp.1-17
• /
• 2012

This Paper deals with the stochastic behavior and failure analysis of a Viscose Staple Fibre Plant which produces fibre for making clothes. The fibre making plant is a complex system with various subsystems as: Vendor (supplies Charcoal and Sulphur, raw materials for the process), Carbon di sulphide Plant, Acid Plant, Pulp Plant and Processing Plant. The considered system can completely fail due to failure of any of the subsystems. The Carbon di Sulphide Plant can fail in two different ways, due to lack of Sulphur or Charcoal. Processing Plant has the configuration 5-out-of-10: d and 6-out-of-10: f. It is also assumed that the system can fail due to workers strike and catastrophic failure. All failures follow exponential time distribution whereas all repairs follow general time distribution. Preventive Maintenance policy has been applied to reduce the failure in the system. Various reliability characteristics such as transition state probabilities, steady state behavior, reliability, availability, M.T.T.F and the cost analysis have been obtained using supplementary variable technique and Gumbel-Hougaard copula methodology.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.921-928
• /
• 2011

This paper presents a new method of local voltage control to achieve coordinative control among UPFC(Unified Power Flow Controller) and conventional reactive compensation equipments, such as switched-shunt and ULTC(Under-Load Tap Changing) transformer. Reactive power control has various difficult aspects to control because of difficulty of system analysis. Recently, the progress of power electronics technologies has lead to commercial availability of several FACTS(Flexible AC Transmission System) devices. The UPFC(Unified Power Flow Controller) simultaneously allows the independent control of active and reactive power flows as well as control of the voltage profile. When conventional reactive power sources and UPFC are used to control system voltage, the UPFC reacts to the voltage deviation faster than the conventional reactive power sources. Keeping reactive power reserve in an UPFC during steady-state operation is always needed to provide reactive power requirements during emergencies. Therefore, coordination control among UPFC and conventional reactive power sources is needed. This paper describe the method to keep or control the voltage of power system of local area and to manege reactive power reserve using PSS/E with Python. The result of simulation shows that the proposed method can control the local bus voltage within the given voltage limit and manege reactive power reserve.

• 한국인터넷방송통신학회논문지
• /
• 제21권1호
• /
• pp.115-120
• /
• 2021

본 논문에서는 비례공진 전류제어기 기반의 단상 영구자석 동기전동기의 운전 알고리즘을 제안하였다. 일반적으로 단상 영구자석 동기전동기의 경우 회전자의 형상에 따른 비대칭 공극이 발생할 수 있으며, 이는 고속 운전시 소음과 진동의 원인이 된다. 따라서 본 논문에서는 제어 안정성이 뛰어난 비례공진 전류제어기를 적용한 단상 영구자석 동기전동기의 운전 알고리즘을 제안하였다. 비례공진 전류제어기법은 정상상태 오차가 없고 왜란에 대해 비교적 강인한 특성을 가지고 있으며, 복잡한 연산과정 없이 교류입력의 정상상태를 제거할 수 있다. 제안한 알고리즘의 유효성과 타당성을 실험을 통해 검증하였다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1882-1888
• /
• 2010

It is widely known that ESA(Electric Signature Analysis) method is very useful one for fault diagnosis of an induction motor. Online fault diagnosis system of induction motors using LabVIEW is proposed to detect the fault of broken rotor bars and shorted turns in stator. This system is not model-based system of induction motor but LabVIEW-based fault diagnosis system using FFT spectrum of stator current in faulty motor without estimating of motor parameters. FFT of stator current in faulty induction motor is measured and compared with various reference fault data in data base to diagnose the fault. This paper is focused on to predict and diagnose of the health state of induction motors in steady state. Also, it can be given to motor operator and maintenance team in order to enhance an availability and maintainability of induction motors. Experimental results are demonstrated that the proposed system is very useful to diagnose the fault and to implement the predictive maintenance of induction motors.

• 대한안전경영과학회지
• /
• 제10권3호
• /
• pp.89-98
• /
• 2008

A preventive maintenance model, caller FNBM($\alpha$, $\delta$, $\gamma$)model, is proposed to decide an optimal repair number under achieved availability requirements(r) along with taking two types of failures (repairable or irrepairable) into account. In this model, the current system is replaced by a new one in case when it doesn't meet the achieved availability requirement, even though it is repairable failure; Otherwise it is replaced in time of the first irrepairable failure. Assumed that the j-th failure is repairable with probability ${\alpha}_j$ minimal repairs are allowed for repairable failure between replacements. Expected cost rate for preventive maintenance model is developed using NHPP(Non-Homogeneous Poisson Process) in order to determine the optimal number $n^*$, also numerical examples are shown in order to explain the proposed model. Since the proposed FNBM($\alpha$, $\delta$, $\gamma$)model includes Park FNBM model(1979) and Nakagawa FNBM(p)model(1983) this proposed model is thought to be better than previous model, especially for weapon system which requires availability as primary parameter.

• BMB Reports
• /
• 제40권1호
• /
• pp.100-106
• /
• 2007

The wound-inducible lipoxygenase obtained from maize is one of the nontraditional lipoxygenases that possess dual positional specificity. In this paper, we provide our results on the determination and comparison of the kinetic constants of the maize lipoxygenase, with or without detergents in the steady state, and characterization of the dependence of the kinetic lag phase or initial burst, on pH, substrate, and detergent in the pre-steady state of the lipoxygenase reaction. The oxidation of linoleic acid showed a typical lag phase in the pre-steady state of the lipoxygenase reaction at pH 7.5 in the presence of 0.25% Tween-20 detergent. The reciprocal correlation between the induction period and the enzyme level indicated that this lag phenomenon was attributable to the slow oxidative activation of Fe (II) to Fe (III) at the active site of the enzyme as observed in other lipoxygenase reactions. Contrary to the lagging phenomenon observed at pH 7.5 in the presence of Tween-20, a unique initial burst was observed at pH 6.2 in the absence of detergents. To our knowledge, the initial burst in the oxidation of linoleic acid at pH 6.2 is the first observation in the lipoxygenase reaction. Kinetic constants (Km and kcat values) were largely dependent on the presence of detergent. An inverse correlation of the initial burst period with enzyme levels and interpretations on kinetic constants suggested that the observed initial burst in the oxidation of linoleic acid could be due to the availability of free fatty acids as substrates for binding with the lipoxygenase enzyme.