• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.10-17
• /
• 2012

This paper presents an improved iron loss model, for the computation of the no load iron loss in the stator core of the in-wheel permanent magnet synchronous motors (PMSM), for the cases of with and without stator skew. 2-D analytical model is used for the computation of tooth and yoke flux densities of the in-wheel PMSM. The no load iron loss computed by the improved iron loss model, for the cases of with and without skew is compared with the finite element method (FEM) and the results show good consistency.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.540-548
• /
• 2019

In this work a new configuration of E-core stator Switched Reluctance Motor (SRM) with permanent magnets and auxiliary windings embedded in the stator yoke is proposed. For the proposed configuration of SRM electromagnetic analysis is performed using Finite Element Analysis (FEA) based computer aided design package MagNet and to emphasize its merits a comparison is drawn with existing hybrid excitation configuration of SRM. In addition, the vibration characteristics of the motor are analyzed by performing modal and transient analysis using the ANSYS package. Results of the analysis reveals that the proposed configuration of SRM exhibits better electromagnetic and vibration characteristics and is capable of competing with the existing topologies in the variable speed market.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.15-16
• /
• 2010

본 논문에서는 최소의 진동/소음을 가지는 SRM을 설계하기 위하여 고정자와 회전자의 Skew에 따른 단상 6/6 SRM의 소음/진동 특성을 비교, 분석하였다. SRM(Switched Reluctance Motor)에 발생하는 소음/진동의 주 원인은 모터 구동 시 Yoke 에 발생하는 방사방향 힘의 변화라고 할 수 있다. Yoke에 작용하는 힘은 돌극이 위치한 곳에 집중되므로 더욱 큰 진동을 유발하지만 회전자와 고정자에 동일한 Skew를 적용시키면 힘을 받는 Yoke의 면적은 늘어나게 되고, 따라서 방사방향의 힘을 요크 전체로 분산 시킬 수 있다. 이에 따라 스위치 온, 오프시 요크에 인가되는 방사방향의 힘의 최대치는 감소하게 되어 진동/소음이 현저히 줄어들게 된다. 본 논문에서는 최소의 진동/소음을 가지는 SRM을 설계하기 위하여 시뮬레이션을 통하여 회전자와 고정자의 스큐 각도에 따른 힘의 분포를 분석하였다. 시뮬레이션 결과를 바탕으로 하여 대표적인 특성을 가진 $0^{\circ}$, $18^{\circ}$의 SRM을 설계하여 소음/진동을 측정한 결과 제안한 방식이 소음/진동을 현저하게 감소시키는 효과를 가짐을 입증하였다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.60-63
• /
• 2004

BLDC Motor has many advantages but the motor has slots in Stator like as other conventional Motors therefore cannot be eliminated torque ripple which is not acceptable for a special purpose. For high speed and high efficiency and no torque ripple is a Double Cylinder Motor suggested which has a air-gap-winding and rotating yoke with magnet. Because Airgap winding needs no slot and no ironloss is made in rotating yoke. In this paper describes design and construction and theoretical and experimental investigation of a Double Cylinder Motor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.794-798
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coils of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate the thrust force at air gap. In order to compare the force characteristics between two methods, various experiment results are applied to verify on a prototype. Also the flexible modes of the motor are predicted through the FEM and the structural components are modified to locate this on high frequency region.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.2-378
• /
• 2002

This paper deals with a moving coil type linear motor for fast access of the miniature ODD. This slim-line motor is composed of the mover supported by guide mechanism, the coil wound into it, and the yoke attached to the permanent magnet for stator. The driving force is generated by the PM of the stator and the current in the coil of the mover. Magnetic circuit analysis and Finite Element Method are applied to estimate force at air gap. (omitted)

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.342-344
• /
• 1999

This paper presents the analysis of core losses in capacitor-run single phase induction motors using the finite element methods. The double revolving field theory can be used for the analysis to assess the quantitative and qualitative performance of the single-phase induction motor. But it is difficult to evaluate accurately the core losses. It is more difficult to segregate stator and rotor core losses at no-load and load conditions. Numerical analysis such as FEM can be used effectively for the accurate calculation of core losses and motors performances. In this paper, the coupling method of core loss characteristic equation and FEM are proposed for the accurate calculation of core losses in the stator and rotor. The FFT is also used to calculate fundamental and harmonic components in the yoke and teeth parts of motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.5
• /
• pp.320-326
• /
• 2000

The canned motor of 3-phase induction is used for main coolant pump(MCP). The type of motor is canned-motor that stator and rotor are welded by sealed can. So, cooling water flows in the air gap of the canned motor as an independent cycling cooling system from the air gap to yoke of the motor to prevent high temperature of stator can and to lubricate bearing. Heat exchange is occurred between cooling water in the air gap and cooling water from the exterior pump to prevent rising of temperature in the motor. I has to analyze the characteristics of can exactly because the loss and the heat in the can are very important to design MCP. Therefore, thermal analysis is studied considering the effect of eddy-current los induced in the can.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.7
• /
• pp.1053-1058
• /
• 2017

In this paper, the design of iron loss minimization of 600W was performed by using Quasi-Newton method. Stator shoe, the width of stator teeth and yoke, and the length of d-axis flux path were selected as design parameters, and the output characteristics according to each design variable were considered. The objective function was set to minimize iron loss. Using the Quasi-Newton method, the variables converged to the target value while changing simultaneously and multiple times. As the algorithm advanced optimization, the correlation with the behavior of each variable was compared and analyzed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.5
• /
• pp.39-51
• /
• 2014

This paper deals with design of a direct-coupled, small-scaled permanent magnet generator (PMG) for wind power application. First, this paper determines rated power and speed of the PMG from measured characteristics of wind turbines. Second, we derive analytical solutions for the open-circuit field in order to determine optimum magnet thickness and pole pitch/arc ratio. Third, on the basis of open circuit field solutions, stator magnetic circuit including slot opening, teeth width and yoke thickness is designed. And then, a diameter of stator coil which agree with a required current density is calculated, and its turns are determined from the area of slot considering winding packing factor. Finally, finite element (FE) method is employed in analyzing the details of the designed PMG and, test results such as back-emf measurements are given to confirm the design.