• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.2
• /
• pp.190-200
• /
• 2002

Purpose; The purpose of this study was to develop an instrument to measure sexual satisfaction in Korean adults. Method: Development of items for the instrument was done by a collecting, reorganizing, reducing and selecting process based on the literature. A total of 19 items were selected in this process. For evaluation of the appropriateness of the 19 items, questionnaires were given to an expert group consisting of 18 professionals (7 men and 11 women). Eighteen items having a response of 70% in 'very good' item or 'good' item were included as items for the instrument. With these 18 items, a 5 point Likert scale was developed, and reliability and validity tests of the scale were done. The subjects for the test were 1,127 Korean adults living in 11 areas in Korea, Data were collected from Dec. 1, 2000 to Feb. 28, 2001 and analyzed with SPSS/PC+ 10.0 program. Item analysis and factor analysis were used to assess the reliability and validity of the scale. Chronbach alpha and corrected item-total correlation were obtained to verify internal consistency, and principal component analysis with the varimax rotation was used to identify structure validity of the developed tool. Result: Reliability of the scale was .9503 and corrected item-total correlations of the items were distributed from .5208 to 7899. As a result of the factor analysis, the items were categorized into three factors. The cumulative variance of the three factors was 67.1%, and all of the variances of the factors were above 5%. Because factor 1 (8 items) indicated a special feeling of psychological satisfaction with sexual activity, it was named 'psychological factor'. Factor 2 (8 items) indicated a feeling of satisfaction in the interaction with sexual partner through communication and variation, therefore it was named 'interactional factor'. Factor 3 (2 items) was about the frequency and duration of sexual intercourse and indicated physical dimensions of satisfaction, so it was named 'physical factor'. The average score for sexual satisfaction of the 1,127 subjects was 65.32 (${\pm}12.71$), and histogram of the score showed a normal distribution with skewness - .425. Conclusion: Finally, a Korean Sexual Satisfaction Scale(KSSS) was accepted as a 5 point Likert scale with 18 items after the statistical test for reliability and validity. In conclusion, KSSS is a useful instrument which is valid and reliable can be used to understand the sexuality of Korean adults.

• Journal of Korea Water Resources Association
• /
• v.47 no.9
• /
• pp.825-838
• /
• 2014

The stationary Markov chain model has been widely used as a daily rainfall simulation model. A main assumption of the stationary Markov model is that statistical characteristics do not change over time and do not have any trends. In other words, the stationary Markov chain model for daily rainfall simulation essentially can not incorporate any changes in mean or variance into the model. Here we develop a Non-stationary hidden Markov chain model (NHMM) based stochastic downscaling scheme for simulating the daily rainfall sequences, using general circulation models (GCMs) as inputs. It has been acknowledged that GCMs perform well with respect to annual and seasonal variation at large spatial scale and they stand as one of the primary sources for obtaining forecasts. The proposed model is applied to daily rainfall series at three stations in Nakdong watershed. The model showed a better performance in reproducing most of the statistics associated with daily and seasonal rainfall. In particular, the proposed model provided a significant improvement in reproducing the extremes. It was confirmed that the proposed model could be used as a downscaling model for the purpose of generating plausible daily rainfall scenarios if elaborate GCM forecasts can used as a predictor. Also, the proposed NHMM model can be applied to climate change studies if GCM based climate change scenarios are used as inputs.

• Physical Therapy Korea
• /
• v.23 no.3
• /
• pp.21-28
• /
• 2016

Background: The toe-spread-out (TSO) exercise has been introduced as a strengthening exercise for the abductor hallucis muscle in subjects with hallux valgus. Visual biofeedback using ultrasound imaging during exercise, may increase the ability to selectively contract the abductor hallucis muscle, compared with exercise alone. Objects: The aim of this study was to investigate the effects of ultrasound imaging visual feedback during the TSO exercise with respect to its influence on the angle of the first metatarsophalangeal joint (1st MPJ) and the cross-sectional area (CSA) of the abductor hallucis muscle in subjects with hallux valgus. Methods: Twenty-five healthy young subjects with a mean average age of 22.5 years, and a standard deviation of 2.3 years, were recruited for this study. Hallux valgus was defined as an angles greater than $15^{\circ}$ angle of 1st MPJ. Goniometric measurement was used to determine the angle of 1st MPJ. In addition, an ultrasound system was used to collect the CSA of the abductor hallucis muscle in each foot. The angle of the 1st MPJ and CSA of the abductor hallucis were measured in three positions; the resting position, during TSO exercise, and during TSO exercise in conjunction with real-time ultrasound imaging feedback. All data analyzed using a repeated analysis of variance with Bonferroni correction in order to compare the dependent variables in all three positions. Statistical level of significance was set up as p<.05. Results: The angle of the 1st MPJ was noted to be significantly reduced and the CSA of the abductor hallucis to be significantly greater during TSO exercise used in conjunction with ultrasound imaging visual feedback, compared to when the values were recorded during TSO exercise alone (p<.05). Conclusion: Based on these findings, it can be concluded that the application of ultrasound imaging visual feedback during TSO exercise is more effective in contracting selectively the abductor hallucis than the use of exercise alone.

• Korean Journal of Clinical Pharmacy
• /
• v.10 no.1
• /
• pp.13-18
• /
• 2000

The bioequivalence of two clarithromycin tablets, the $Klaricid^{TM}$ (Ciba-Geigy Korea Ltd.) and the $Pylocin^{TM}$ (Kyungdong Pharmaceutical Co., Ltd.), was evaluated according to the Korean Guidelines for Bioequivalence Test (KGBT 1998). Sixteen healthy male volunteers ($20\sim26$ years old) were randomly divided into two groups and a randomized $2\times2$ cross-over study was employed. After one tablet containing 250 mg of clarithromycin was orally administered, blood sample was taken at predetermined time intervals, and the concentrations of clarithromycin in serum were determined using high-performance liquid chromatographic method with electrochemical detector. The pharmaco-kinetic parameters (area under the concentration-time curve: $AUC_t$, maximum concentration; $C_{max}$ and time to maximum concentration; $T_{max}$) were calculated and analysis of variance (ANOVA) was utilized for the statistical analysis of parameters. The results showed that the differences in $AUC_t,\;C_{max}\;and\;T_{max}$ between two tablets based on $Klaricid^{TM}$ tablet were $-0.22\%,\;-0.48\%\;and\;-1.63\%$, respectively. The powers $(1-\beta)\;for\;AUC_t,\;C_{max}\;and\;T_{max}\;were\;99.07\%,\;88.15\%\;and\;99.99\%$, respectively. Detectable differences $(\Delta)\;and\;90\%$ confidence intervals ($\alpha$=0.10) were all less than $\pm20\%$ All the parameters above met the criteria of KGBT 1998, indicating that $Pylocin^{TM}$ tablet is bioequivalent to $Klaricid^{TM}$ tablet.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.55-60
• /
• 2020

PURPOSE. The aim was to evaluate the effect of four acidic beverages on the roughness (Ra) and color change (ΔE_ab) of two brands of artificial teeth and a heat-polymerized acrylic resin (HPAR) for use in a prosthetic base. MATERIALS AND METHODS. All materials were divided into 5 groups, according to the used acidic beverage (artificial saliva - control, red wine, orange juice, coke-based, and lemon juice-based soft drink). The immersion process was divided into two stages: T1 - immersion in the acidic solutions for 10 minutes for 14 days; T2 - after T1, the samples were immersed in grape juice for 14 days. The Ra of the samples was evaluated in a rugosimeter and the ΔE_ab in a spectrophotometer, before and after the immersions. The analysis of variance of one (ΔE_ab) and two factors (Ra) and Tukey were performed (α=.05). RESULTS. There was a statistical difference for roughness after immersion (T1) for Trilux and Tritone teeth, regardless of the acid solution. For Trilux teeth, all acid solutions increased Ra (P<.05). For Tritone teeth, only the coke-based soft drink did not statistically change Ra. Grape juice (T2) altered Ra only of artificial teeth (P<.05). The color was changed for all materials, after T1 and T2. CONCLUSION. In general, the acidic solutions changed the Ra and ΔE_ab of HPAR and artificial teeth after T1. The grape juice altered the roughness only of the artificial teeth, promoting a clinically acceptable color change in the materials.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2020

PURPOSE. The purpose of this in vitro study was to evaluate the fitting accuracy of single crowns made from a novel presintered Co-Cr alloy prepared with a computer-aided design and computer-aided manufacturing (CAD/CAM) technique, as compared with crowns manufactured by other digital and the conventional casting technique. Additionally, the influence of oxide layer on the fitting accuracy of specimens was tested. MATERIALS AND METHODS. A total of 40 test specimens made from Co-Cr alloy were investigated according to the fitting accuracy using a replica technique. Four different methods processing different materials were used for the manufacture of the crown copings (milling of presintered (Ceramill Sintron-group_cer_sin) or rigid alloy (Tizian NEM-group_ti_nem), selective laser melting (Ceramill NPL-group_cer_npl), and casting (Girobond NB-group_gir_nb)). The specimens were adapted to a resin model and the outer surfaces were airborne-particle abraded with aluminum oxide. After the veneering process, the fitting accuracy (absolute marginal discrepancy and internal gap) was evaluated by the replica technique in 2 steps, before removing the oxide layer from the intaglio surface of the crowns, and after removing the layer with aluminum oxide airborne-particle abrasion. Statistical analysis was performed by multifactorial analysis of variance (ANOVA) (α=.05). RESULTS. Mean absolute marginal discrepancy ranged between 20 ㎛ (group_cer_npl for specimens of Ceramill NPL) and 43 ㎛ (group_cer_sin for crowns of Ceramill Sintron) with the oxide layer and between 19 ㎛ and 28 ㎛ without the oxide layer. The internal gap varied between 33 ㎛ (group_ti_nem for test samples of Tizian NEM) and 75 ㎛ (group_gir_nb for the base material Girobond NB) with the oxide layer and between 30 ㎛ and 76 ㎛ without the oxide layer. The absolute marginal discrepancy and the internal gap were significantly influenced by the fabrication method used (P<.05). CONCLUSION. Different manufacturing techniques had a significant influence on the fitting accuracy of single crowns made from Co-Cr alloys. However, all tested crowns showed a clinically acceptable absolute marginal discrepancy and internal gap with and without oxide layer and could be recommended under clinical considerations. Especially, the new system Ceramill Sintron showed acceptable values of fitting accuracy so it can be suggested in routine clinical work.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.169-175
• /
• 2016

Purpose: Direct splinting material should have high flexural strength to withstand force during mastication and low modulus of elasticity to provide some movement while force applied for relief of stress. The purpose of this study was to compare flexural strength and modulus of elasticity of several resinous splinting materials. Materials and Methods: Four materials; Super-Bond C&B, G-FIX, G-aenial Universal Flo, FiltekTM Z350 XT; were used in this study. Fifteen rectangular bar specimens of each material were prepared. Three-point bending test were performed to determine physical properties. Maximum load at fracture was recorded and flexural strength and modulus of elasticity were calculated. One-way analysis of variance (ANOVA) and Scheffe's tests at a 0.05 level of significance were conducted on all test results. Results: Statistical analysis reveals that Super-Bond C&B had significant low mean value for flexible strength and the other three materials showed no significant difference. For modulus of elasticity, Super-Bond C&B exhibited statistically lower modulus of elasticity. G-FIX presented intermediate result, showing statistically higher modulus of elasticity than Super-Bond C&B but lower than G-aenial Universal Flo and FiltekTM Z350 XT. There was no significant difference on modulus of elasticity between G-aenial Universal Flo and FiltekTM Z350 XT. Conclusion: Using a G-FIX, the newly commercially available splinting material, which shows higher fracture resistance properties comparable to flowable and restorative composite resin and a relatively flexible nature might be a beneficial for stabilizing teeth mobility.

• Journal of agricultural medicine and community health
• /
• v.39 no.2
• /
• pp.81-93
• /
• 2014

Objectives: The objective of this study was to identify the factors associated with suicidal ideation among the elderly living alone received the elderly care service in a rural area. Methods: This study was surveyed 206 the elderly living alone who received the elderly care service in G-gun, Jeollanamdo. The collected data were socio-demographic and health-related characteristics, family support and suicidal ideation. The used methods for statistical analysis were used t-test, analysis of variance, Pearson's correlational analysis and the multiple logistic regression analysis. Results: In univariate analysis, the suicidal ideation of the elderly living alone was statistically significant associated with age, monthly income, sufficiency of sleeping, depression, stress, activities of daily living, instrumental activities of daily living, perceived health status and family support. As a result of multiple regression analysis, the associated factors with suicidal ideation were age, depression, stress and the activities of daily living. Conclusions: The suicidal ideation of the elderly living alone in the rural area was associated with age, mental health and independency of living. It will be needed the multidisciplinary approaches to prevent the suicidal ideation and attempts of the elderly living alone.

• PNF and Movement
• /
• v.7 no.3
• /
• pp.17-27
• /
• 2009

The purpose of this study was to investigate the effect of close kinetic chain(CKC) and open kinetic chain(OKC) posion on proprioceptive neuromuscular facilitation applied to the unilateral upper extremity on the muscle activation of lower extremity. All subjects were randomly assigned to two groups: open kinetic chain group(n=5),closed kinetic chain group(n=5). All participants were PNF patterns applied on the unilateral upper extremity in all subjects were the kinetic chain(CKC) and open kinetic chain(OKC) posion on flexion/abduction/external rotation. The hold and approximation techniques for the irradiation were applied to end range. All measurements for each subject took the following tests: pre-test, post - test in 4weeks, post-testin 8weeks. EMG data was collected from the vastus medialis, tibialis anterior, biceps femoris, and gastrocnemius muscle of both lower extreamity using surface EMG system, Each EMG value in individual muscle was normalized for maximal voluntary contraction. The data were analyzed using Two-way analysis of variance(ANOVA) with repeated measures to determine the statistical significances. The results of this study are summarized as follows. First, during for close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application, all of the %MVIC values of close kinetic chain and open kinetic chain posion increased sign ificantly compared(p<0.05). Second, The close kinetic chain(CKC) and open kinetic chain(OKC) posion on PNF pattern application was significantly increased with in the intervention period(p<.05). Third, there was a no significant open kinetic chain posion on PNF pattern application of sing muscle group with in the intervention period.(p<0.05) there was a significant close kinetic chain posion on PNF pattern application of sing muscle group with with in the intervention period(p<0.05). Forth, interaction of the exercise position and muscle was also significant. Post-hoc tests revealed that the activation levels of vastus medialis muscle and tibialis anterior muscle was higher in the closed kinetic chain position(p<.05). that the activation levels of vastus medialis and gastrocnemius muscle was higher in the open kinetic chain position(p<.05). In conclusion, it was found that the application of PNF patterns to the unilateral upper extremity effect on the muscle activation of lower extremity and both open kinetic chain exercise and closed kinetic chain exercise was significantly increased muscle activity. Further studies are needed to analyzed long term effects and subjects resulting from these changed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.319-324
• /
• 2003

Statement of problem. Adhesives in dentistry playa major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. Purpose. The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. Material and methods. Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32% phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at $500mV/cm^2$ was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately $0.3{\sim}0.5mm$ using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately $0.5mm{\sim}1.0mm$ using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. Result. The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. Conclusion. Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.