• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.25-30
• /
• 2017

This study was to investigate the supporting awareness and empathy with the dental hygiene student. The participants were 193 dental hygiene students in Gwang Ju city and analyzed by the frequency analyzed, t-test, ANOVA, pearson corelation coefficients and multiple regression analysis using IBM SPSS STATICS 20.0. Supporting awareness and empathy about the elderly had a significant positive correlation. Factors influencing empathy were interest of elderly problem and supporting awareness. It is necessary to the establishment of a subject and education program about elderly in dental hygiene students.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.7
• /
• pp.648-653
• /
• 2015

The kinematics with the instantaneous motion and statics of a manipulator has generally been proven algebraically. The algebraic solutions give very simple and straightforward results but the solutions do not have any meaning in physics or geometry. Therefore it is not easy to extend the algebraic results to design or control a robotic manipulator efficiently. Recently, geometrical approach to define the instantaneous motion or static relation of a manipulator is popularly researched and the results have very strong advantages to have a physical insight in the solution. In this paper, the instantaneous motion and static relation of a planar manipulator are described by geometrical approach, specifically by an axis screw and a line screw. The mass center of a triangle with weight and a perpendicular distance between the two screws are useful geometric measures for geometric analysis. This study provides a geometric interpretation of the kinematics and statics of a planar manipulator, and the method can be applied to design or control procedure from the geometric information in the equations.

• Women's Health Nursing
• /
• v.4 no.3
• /
• pp.375-387
• /
• 1998

In clinical trials of nursing research, the sample size determination is one of the most important factor. Although sample size must be considered at the design stage, it has been disregarded in most clinical trials. The power analysis is usually performed before study begins to compute sample size and the power can also be calculated at the end of study in order to justify study result. The power analysis is essential especially when the clinical trials can not show significant differences. In this paper, we review the statistical methods for power analysis and sample size formulae in nursing research. Sample size formulae and the corresponding examples are discussed according to the six types of studies ; mean for one sample, proportion for one sample, means in two samples, proportions in two samples, correlation coefficient and ANOVA.

• The Journal of the Korea Contents Association
• /
• v.19 no.7
• /
• pp.176-185
• /
• 2019

Diffusion tensor images were obtained for middle-aged men according to the AUDIT-K scale. As a result of the fractional anisotropy (FA) value of the gyrus nerve fibers in the brain region measured and analyzed by the Tract-Based Spatial Statics, FA values of general drinkers were measured lower than those of estimated alcohol use disabled people. This was statistically significant. In other words, the use of alcohol significantly affects the anatomic microstructural changes measured in the Gyrus of the brain region, and it may damage the nerve fiber tract and affect the functional abnormalities associated with it.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.448-461
• /
• 2019

Changes in gravity and buoyancy of a Full Ocean Depth Autonomous Underwater Vehicle (FOD-AUV) during its descending and ascending process must be considered very carefully compared with a Human Occupied Vehicle (HOV) or a Remotely Pperated Vehicle (ROV) whose activities rely on human decision. We firstly designed a two-step weight dropping pattern to achieve a high descending and ascending efficiency and a gravity-buoyancy balance at designed depth. The static equations showed that gravity acceleration, seawater density and displacement are three key aspects affecting the balance. Secondly, we try our best to analysis the gravity and buoyancy changing according to the previous known scientific information, such as anomaly of gravity acceleration, changing of seawater states. Finally, we drew conclusion that gravity changes little (no more than 0.1kgf, it is impossible to give a accurate value). A density-depth relationship at the Challenger Deep was acquired and the displacement changing of the FOD-AUV was calculated preciously.

• Journal of Korean Critical Care Nursing
• /
• v.12 no.3
• /
• pp.61-73
• /
• 2019

Purpose : The purpose of this study was to examine the effects of two single chest physiotherapies mechanically ventilated patients with acute lung injury. Method : Participants were 30 ICU patients depending entirely on ventilators without self-respiration. Each patients received two single chest physiotherapiesvibration palm cup percussion at hour intervals. Data were analyzed one-way ANOVA and Wilcoxon signed-rank test. Statistical significance was accepted at a p value less than .05. Results : ibration therapy, dynamic compliance and statics compliance demonstrated a significant increase immediately and remained increased until 30 minutes after chest physiotherapy. palm cum percussion therapy saturation showed a significant increase immediately chest physiotherapyut there were no significant differences in tidal volume, dynamic compliance and statics compliance. Conclusion : In this study, we analyzed the effects of oscillation method and palm cup percussion method separately for each type of chest physiotherapy. Nursing interventions that actively utilize vibration methods should be provided to patients with respiratory diseases.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.7-17
• /
• 2005

The determination of seismic velocities in refractors for near-surface seismic refraction investigations is an ill-posed problem. Small variations in the computed time parameters can result in quite large lateral variations in the derived velocities, which are often artefacts of the inversion algorithms. Such artefacts are usually not recognized or corrected with forward modelling. Therefore, if detailed refractor models are sought with model based inversion, then detailed starting models are required. The usual source of artefacts in seismic velocities is irregular refractors. Under most circumstances, the variable migration of the generalized reciprocal method (GRM) is able to accommodate irregular interfaces and generate detailed starting models of the refractor. However, where the very-near-surface environment of the Earth is also irregular, the efficacy of the GRM is reduced, and weathering corrections can be necessary. Standard methods for correcting for surface irregularities are usually not practical where the very-near-surface irregularities are of limited lateral extent. In such circumstances, the GRM smoothing statics method (SSM) is a simple and robust approach, which can facilitate more-accurate estimates of refractor velocities. The GRM SSM generates a smoothing 'statics' correction by subtracting an average of the time-depths computed with a range of XY values from the time-depths computed with a zero XY value (where the XY value is the separation between the receivers used to compute the time-depth). The time-depths to the deeper target refractors do not vary greatly with varying XY values, and therefore an average is much the same as the optimum value. However, the time-depths for the very-near-surface irregularities migrate laterally with increasing XY values and they are substantially reduced with the averaging process. As a result, the time-depth profile averaged over a range of XY values is effectively corrected for the near-surface irregularities. In addition, the time-depths computed with a Bero XY value are the sum of both the near-surface effects and the time-depths to the target refractor. Therefore, their subtraction generates an approximate 'statics' correction, which in turn, is subtracted from the traveltimes The GRM SSM is essentially a smoothing procedure, rather than a deterministic weathering correction approach, and it is most effective with near-surface irregularities of quite limited lateral extent. Model and case studies demonstrate that the GRM SSM substantially improves the reliability in determining detailed seismic velocities in irregular refractors.

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.153-162
• /
• 2019

Rapid variations in the geometry (i.e., thickness) of the refractor and low velocities affect greatly the imaging of the reflectors of land seismic data. Conventional solutions to obtain the weathering models utilizes first break picking method, which requires time consuming steps and causes the human error in picking the first arrivals. A new interferometric approach (interferometric refraction statics, IRS) which utilizes the first arrival signal (S/N enhanced by refraction convolution stack) instead of first break picking, is tested in this study to the synthetic data from the velocity structure provided by surface geophysics (refraction, MASW) and borehole geophysics (tomography, SPS logging) for the Cheongju granitic bodies. The results of IRS approach are found to be better than the ones from conventional first break picking in terms of continuities and horizontal resolution of the reflectors. The unresolved long-wavelength statics in brute stack are much removed by IRS weathering correction and the overlying refractors (the base of shallow weathering zone) are incidentally delineated in the refraction convolution stack.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.575-583
• /
• 2022

Magnetic resonance diffusion tensor imaging (DTI) has revealed the disruption of brain white matter microstructure in normal aging and alcoholism undetectable with conventional structural MR imaging. we plan to analyze the FA measurements of the ROI of dangerous drinkers selected from Alcohol Use Disorders Identification Test (AUDIT) and Tract-Based Spatial Statics (TBSS) tool was used to extract FA values in the ROI from the image acquired through the pre-processing process. TBSS has a higher sensitivity of the FA value and MD value in the white matter than the brain gray matter, and has the advantage of quantitatively deriving the unlimited degree of brain nerve fibers, and more specialized in the brain white matter. We plan to analyze the fractional anisotropy (FA) measurement value for damage by selecting the center of the anatomical structure of the white matter region of the brain with high anisotropy among the brain neural networks that are particularly vulnerable to alcohol as the region of interest (ROI). In this study, we expected that alcohol causes damage to the brain white matter microstructure from FA value in various areas including both Choroid plexus. Especially, In the case of the moderate drunker, the mean value of FA in Lt, Rt. Choroid plexus was 0.2831 and 0.2872, whereas, in the case of the severe drunker, the mean value of FA was 0.1972 and 0.1936. We found that the higher the score on the AUDIT scale, the lower the FA value in ROI region of the brain white matter. Using the AUDIT scale, the guideline for the FA value of DTI can be presented, and it is possible to select a significant number of potentially severe drinkers. In other words, AUDIT was proved as useful tool in screening and discrimination of severe drunker through DTI.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04b
• /
• pp.385-387
• /
• 2002

개발자는 품질 요구사항을 만족하는 소프트웨어를 만들 책임이 있기 때문에 최종 제품의 품질뿐만 아니라 중간 제품의 품질에도 관심을 갖는다. 이러한 이유에서 품질관리를 위해서는 소프트웨어 품질 테스팅이 필요로 하게 되는데 테스팅의 방법에는 크게 WhiteBox Testing과 BlackBox Testing으로 나누어 진다 본 논문에서는 C++ 언어에 적용할 수 있는 정적 분석 도구를 설계하였으며, 이 도구의 특징은 테스팅 도구에 테스터의 의도를 전달 할 수 있는 테스트 제어 언어를 정의하고, 또한 이 정의 언어를 사용하여 Worm 코트론 삽입하여 테스팅 할 수 있는 정적 태스팅 도구를 설계하였다.