• 응용통계연구
• /
• 제18권2호
• /
• pp.253-269
• /
• 2005

회귀모형의 기본가정은 추정된 계수들이 표본 내의 모든 관측값에 대해 일정하다는 것이다. 그러나 자료의 구조적 변화로 인해 모형의 추정계수 중 최소한 일부는 상이한 부분집합으로 전체 표본을 분할해야 하는 경우가 현실적으로는 흔히 존재한다. 본 연구에서는 두 회귀모형 계수들간의 동일성을 검정하는 방법을 확대${\cdot}$일반화하여 자료의 분할시점을 탐색하는 검정절차와 결합시킨 후 이를 최근 가장 큰 사회적 문제가 되고 있는 실업률의 구조변화 발생 여부와 시점을 판별하는 실증분석에 적용시켜 보았다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권1호
• /
• pp.53-60
• /
• 2002

Neurosensory dysfunction of the injured inferior alveolarnerve(IAN) is a common and distrssing consequence of traumatic or iatrogenic injury. Conventional neurosensory testing has been used to detect and monitor sensory impairments of the injured IAN. However, these tests had low reliability and are not qualitative at best because they are based on solely on the patient's subjective assesment of symptoms. Consequently, there is need for more reliable, sensitive, and objective test measures to document and to monitor sensory dysfunction of the trigeminal nerve. This study was to investigate DITI's (digital infrared thermographic imaging) potential as a diagnostic alternative for evaluating of the nerve injures and sensory disturbance. Subjects were 30 patients who had been referred to Ewha Medical Center due to sensory disturbance of the lower lip and chin followed after unobserved inferior alveolar nerve injuries. The patients were examined by clinical neurosensory tests as SLTD (static light touch discrimination), MDD (moving direction discrimination), PPN (pin prick nociception) and DITI (digital infrared thermographic imaging). The correlation between clinical sensory dysfunction scores(Sum of SLTD, MDD, PPN, NP, Tinel sign) and DITI were tested by Spearman nonparametric rank correlation anaylsis & Kruskal-Wallis test, Wilcoxon 2-sample test. This study resulted in as follows; (1) The difference of thermal difference between normal side and affected side was as ${\Delta}-3.2{\pm}0.13$. (2) The DITI differences of the subjects presenting dysesthesia of the lip and chin were correlated significantly with the neurosensory dysfunction scores(r=0.419, p=0.021)and SLTD (r=0.429, p<0.05). (3) The MDD, PPN, NP, Tinel sign, duration, gender were not correlated with DITI(p> 0.05). Therefore, the DITI(digital infrared thermographic imaging) can be an option of the useful objective diagnostic methods to evaluate the injured inferior alveolar nerve and sensory dysfunction of trigerminal nerve.

• Wind and Structures
• /
• 제23권4호
• /
• pp.313-350
• /
• 2016

Taipei 101 Tower, which has 101 stories with height of 508 m, is located in Taipei where typhoons and earthquakes commonly occur. It is currently the second tallest building in the world. Therefore, the dynamic performance of the super-tall building under strong wind actions requires particular attentions. In this study, Large Eddy Simulation (LES) integrated with a new inflow turbulence generator and a new sub-grid scale (SGS) model was conducted to simulate the wind loads on the super-tall building. Three-dimensional finite element model of Taipei 101 Tower was established and used to evaluate the wind-induced responses of the high-rise structure based on the simulated wind forces. The numerical results were found to be consistent with those measured from a vibration monitoring system installed in the building. Furthermore, the equivalent static wind loads on the building, which were computed by the time-domain and frequency-domain analysis, respectively, were in satisfactory agreement with available wind tunnel testing results. It has been demonstrated through the validation studies that the numerical framework presented in this paper, including the recommended SGS model, the inflow turbulence generation technique and associated numerical treatments, is a useful tool for evaluation of the wind loads and wind-induced responses of tall buildings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1178-1187
• /
• 2008

Quality assurance for embankment compaction is one of very important procedures to guarantee high quality construction. However, only sand replacement method (KS F2312) and static plate load test (KS F2310) which are conventional and tiresome methods are used to evaluate degree of compaction at construction fields. Recently, new types of devices such as the geogauge and the light falling weight deflectometer (LFWD), the soil impact hammer (CASPFOL) and dynamic cone penetration test etc. which are able to substitute for the conventional methods are begun to use to evaluate soil stiffness. In this study, a laboratory model test was performed to evaluate correlations among test results obtained from the new devices and to assess the potential use of them. All test results have correlations with relative density and water content. Especially, the coefficients of correlation between $E_G$ from the geogauge and $K_{30'}$ from the soil impact hammer and between $E_G$ from the geogauge and $E_{LFWD}$ from LFWD are more than 0.7 but those between the results from DCP and others are less than those between $E_{G{\cdot}}$ and $K_{30'}$ and $E_G$ and $E_{LFWD}$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.611-618
• /
• 2005

In this research, the effect of rock mass weathering on the side shear resistance of drilled shaft socketed into weathered rock was investigated. For that, a database of 23 cast-in-place concrete piles with diameters varying from 400mm to 1,500mm were socketed into weathered igneous/meta-igneous rock at four different sites. The static axial load tests were performed to examine the resistant behavior of the piles, and a comprehensive field/laboratory testing program at the field test site was also performed to describe the in situ rock mass conditions quantitatively. No correlation was found between the compressive strengths of intact rock and the side shear resistance of weathered/soft rock. The ground investigation data regarding the rock mass conditions (e.g. $E_m,\;E_{ur},\;_{plm}$, RMR, RQD, j) was found to be highly correlated with the side shear resistance, showing the coefficients of correlation greater than 0.7 in most cases. Additionally, the applicability of existing methods for the side shear resistance of piles in rock was verified by comparison with the field test data. The existing empirical relations between the compressive strength of intact rock and the side shear resistance(Horvath (1982), Rowe & Armitage(1987) etc.) appeared to overestimated the side shear resistance of all piles tested in this research unless additional consideration on the effect of rock mass weathering or fracturing was applied. The existing methods which consider the effect of rock mass condition were modified and/or extended for weathered rock mass where mass factor j is lower than 0.1, and RQD is below 50%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.57-64
• /
• 2005

Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of the rock socketed pile should be well known. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanisms of drilled shaft socketed into weathered rock was investigated. For that, 5 cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the field test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The side shear resistance of the pile in moderately weathered rock reached to yielding point at a few millimeter displacements, and after that, the rate of resistance increment dramatically decreased. However, that in the highly /completely weathered rock did not show the obvious yielding point, and gradually increased showing the hyperbolic pattern until with the relatively high displacement (>10 mm). The end bearing-displacement curves showed linear increase at least until with the base displacement of approximately 10 mm, regardless rock mass conditions.

• 대한토목학회논문집
• /
• 제32권1C호
• /
• pp.7-16
• /
• 2012

본 논문에서는 낙동강 불포화 실트질 모래의 매우 중요한 기본특성인 불포화 투수계수를 산정하기 위하여 Huang(1998)이 제안한 삼축셀을 이용하여 정적 측정 방법으로 불포화 투수계수를 구할 수 있도록 수정하여 불포화 투수 실험을 실시하였다. 이 시험 장치는 모관흡인력(matric suction)의 증가에 따른 투수계수의 변화를 측정할 수 있도록 설계되었다. 시험 장치를 사용하여 얻은 투수계수 값과 경험적 투수함수식으로부터 계산된 투수계수 값을 비교 분석하였다. 그 결과 불포화투수계수 값이 상대밀도, 실트함유율, 모관흡인력의 증가에 따라 감소하는 경향을 보였는데, 이러한 경향은 함수비와 간극비의 변화에 아주 밀접한 관련이 있다는 것을 알 수 있었다. 또한 Fredlund & Xing(1995)에 의하여 제시된 경험적 투수 함수식이 낙동강 실트질 모래의 불포화투수계수를 표현하는데 제일 적합한 모델이라는 판단을 내리게 되었다.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.670-677
• /
• 2006

Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.65-75
• /
• 2005

흙의 최대 전단탄성계수는 동적/정적 지반구조물 설계에서 중요하게 다루어야 하는 기본 토질상수이다. 본 연구에서는 서해안 송도 지역의 실트질 모래에 대해 표준관입시험, 콘관입시험, 자가굴착식 공내재하시험, 다운홀 시험, 탄성파 탐사 콘관입시험, 공진주 시험 등을 수행하여 최대 전단탄성계수를 구하고 그 결과를 통계적으로 분석하였다. 다운홀 시험을 기준으로 표준관입시험 및 콘관입시험에 대한 경험식으로 구한 최대 전단탄성계수를 비교하고 새로운 경험식물 제안하였다. 제안식으로 구한 전단탄성계수는 다운홀 시험 결과와 비교적 잘 일치하였으며, 제안식을 이용하여 적절히 지반의 최대 전단탄성계수를 평가할 수 있음을 확인하였다.

• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.101-112
• /
• 1995

동적하중을 받는 지반-구조물 시스템의 설계를 위해 전단탄성계수와 감쇠비로 표현되는 지반의 변형특성의 결정은 매우 중요하다. 본 논문에서는 공진주/비틂전단시험기를 이용하여 저변형률 및 중간 변형률하에서 건조사질토의 변형특성을 연구하였다. 동적시험인 공진주시험과 반복시험인 비틀전단시험을 동일한 공시 체를 이용하여 실시하였다. 진동측정시스템을 개량하여 응력 -변형관계가 하중반복회수와 전단변형률의 크기에 영향을 받지않는 선형영역을 찾았으며 이 영역에서 이력감쇠가 존재함을 나타내었다. 반복한계변형률 이상에서는 하중반복회수에 따라 전단탄성계수는 증가하고 감쇠비는 감소하였다. 사질토의 전단탄성계수와 감쇠비는 진동주파수에 영향을 받지 않으며 의사정적시험인 비틈전단시험에서 변형특성과 동적시험인 공진주 시험에서 얻은 값은 비교시 하중반복회수의 영향을 고려하면 동일하다. 그러므로 공진주l비틀전단시 험을 통해 얻은 변형특성은 지반-구조물시스템의 동적해석은 물론 정적해석에서도 적용할 수 있다.