• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1472-1474
• /
• 1999

This paper proposes the estimation method about how much reactive power can be increased or decreased under prescribed bus voltage limits in non-linear reactive power and power flow equations. The static nonlinear reactive power voltage problem can be formulated using a linear resistive(I-V) network with voltage dependent current sources. Linear programming model is derived for finding bounds on reactive power. This method was applied to future Korean power system and proved its effectiveness.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.853-855
• /
• 1999

The induction machine has been used frequently for the system that needs static speed because of its simplicity, durability, credibility and efficiency. But it is nonlinear system for its multi-variable interference. Its controller is more complicated than DC machine's one. So vector control method is needed for its high Performance control. This paper shows that vector control algorithm could be more fast and stable by using Genetic algorithm (GA) based upon Darwin's evolution theory and Mendel's genetics. Methods proposed in here are used to design induction machine's vector controller and to use GA for optimizing the controller's parameter. SIMULINK of MATLAB is used for analysis and conviction of control property

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.203-203
• /
• 2010

The proton exchange membrane fuel cell (PEMFC) is different from the normal power supply, and it is a nonlinear, multi-input, strong coupling, the complex dynamic system with large time delay. At present, many studies on the content of the fuel cell fuel cells focus on a static process, this paper analyzed in subsequent sections of the process of fuel cell dynamic response time of transition, and then it found the method to reduce the response time during the process of load change to ensure that the stability of output power.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.4
• /
• pp.13-18
• /
• 2002

The magnitude of the plastic zone around the crack tip of DENT(Double Edge Notched Tension) specimen and the crack growth length under cyclic loading were measured by ESPI(Electronic Speckle Pattern Interferometry) system. The measured magnitude of plastic zone was compared with the equations proposed by Irwin and calculated by a nonlinear static method of MSC/NASTRAN. The measured crack growth length by ESPI system was also compared with the obtained data by the image analysis system. From the study, it is confirmed that the plastic zone and crack growth length can be measured accurately with the high-tech equipment.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.76-80
• /
• 2001

Unsteady compressible Euler equation is solved and the high-order, high-resolution numerical solver, physical boundary condition, adaptive nonlinear artificial dissipation model and conformal mapping are applied to computation of steady transonic flow and unsteady acoustics. The acoustic characteristics of axi-symmetric duct and two dimensional straight/S channel are studied and the computation results shows good agreements with linear analysis. In transonic case, local time stepping and canceling-the-residual techniques are used for convergence acceleration. The aspect of flow and acoustics in S-channel and the Pattern of noise radiation is changed by inflow Mach no. and static pressure at fan-face.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.1 s.15
• /
• pp.99-105
• /
• 2005

The pushover analysis is becoming a popular tool for seismic design of building structures. In this paper the state-of-art on static nonlinear analysis of building structures is presented with the emphasis on the effects of analysis parameters; i. e., lateral load patterns, modeling of members, and analysis computer programs. The analysed results may have variation even if a same structure is analysed. This paper is to investigate how large the variation is and what the main causes of the variation are. The difference of analysed results, the resultant variation of lateral story shear force and flexural strength of structural members are discussed. The pushover analysis procedure are routinely used in the seismic design of building structures, but some problems must yet be clarified, such as the effects to evaluate the parameters of analysis on the basis of a lateral load patterns and modeling of members.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.832-836
• /
• 1988

"Motion Stereo" is quite useful for visual guidance of the robot, but most range finding algorithms of motion stereo have suffered from poor accuracy due to the quantization noise and measurement error. In this paper, 3-D position estimation and refinement scheme is proposed, and its performance is discussed. The main concept of the approach is to consider the entire frame sequence at the same time rather than to consider the sequence as a pair of images. The experiments using real images have been performed under following conditions : hand-held camera, static object. The result demonstrate that the proposed nonlinear least-square estimation scheme provides reliable and fairly accurate 3-D position information for vision-based position control of robot. of robot.

• Journal of Mechanical Science and Technology
• /
• v.17 no.7
• /
• pp.958-965
• /
• 2003

Structural integrity of either a passenger car or a light truck is one of the basic requirements for a full vehicle engineering and development program. The results of the vehicle product performance are measured in terms of ride and handling, durability, noise/vibration/harshness (NVH), crashworthiness and occupant safety. The level of performance of a vehicle directly affects the marketability, profitability and, most importantly, the future of the automobile manufacturer In this study, we used the virtual proving ground (VPG) approach for obtaining the dynamic characteristics. The VPG approach uses a nonlinear dynamic finite element code (LS-DYNA3D) which expands the application boundary outside the classic linear static assumptions. The VPG approach also uses realistic boundary conditions of tire/road surface interactions. To verify the predicted dynamic results, a single lane change test has been performed. The prediction results were compared with the experimental results, and the feasibility of the integrated CAE analysis methodology was verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.4
• /
• pp.671-684
• /
• 2001

Several design problems of composite structures are studied via a global optimizer based on attraction regions. MSC/NASTRAN is adopted for static and eigenvalue analysis. The method of modified feasible direction in DOT is used for local optimization. Through the review of global optimization algorithms, the triangular patch algorithm is selected because the algorithm is known to be efficient, robust and powerful for general nonlinear optimization problems. For general applicability, various mechanical properties are considered as design objectives; strain energy, eigenvalue, weight, displacement, and buckling load. In all cases considered, the triangular patch algorithm results in a lot of optimum points and useful design patterns, that are not easy by local algorithms or conventional global algorithms can be determined.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.103-110
• /
• 2004

The pushover analysis is becoming a popular tool for seismic design of building structures. In this paper the state-of-art on static nonlinear analysis of building structures is presented with the emphasis on the effects of analysis parameters; i. e., lateral load patterns, modeling of members, and analysis computer programs. The analysed results may have variation even if a same structure is analysed. This paper is to investigate how large the variation is and what the main causes of the variation are. The difference of analysed results, the resultant variation of lateral story shear force and flexural strength of structural members are discussed. The pushover analysis procedure are routinely used in the seismic design of building structures, but some problems must yet be clarified, such as the effects to evaluate the parameters of analysis on the basis of a lateral load patterns and modeling of members.