• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.3
• /
• pp.10-21
• /
• 2022

The propellant tank, which is a space launch vehicle structure, must have structural integrity as various static and dynamic loads are applied during ground transportation, launch standby, take-off and flight processes. Because of these characteristics, the propellant tank cylinder, the structural object of this study, has a thin thickness, so buckling due to compressive load is considered important in the cylinder design. However, the existing buckling design standards such as NASA and Europe are fairly conservative and do not reflect the latest design and manufacturing technologies. In this study, nonlinear buckling analysis is performed using various analysis models that reflect initial defects, and a method for establishing new buckling design standards for cylinder structures is presented. In conclusion, it was confirmed that an effective lightweight design of the cylinder structure for common bulkhead propulsion tank could be realized.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.1
• /
• pp.127-137
• /
• 2022

PURPOSE: This study sought to evaluate muscle activity and foot pressure during gait, and balance in female college students with genu valgum. METHOD: Participants were assigned based on their Q-angle to genu valgum group greater than 20° (GVG, n = 12), unilateral genu valgum group greater than 20° (UVG, n = 11), and control group (CON, n = 13). All subjects were evaluated for balance (Trace length, C90 area, C90 angle, and the Romberg test), muscle activity (gluteus medius; GM, tensor fasciae latae; TFL, vastus medialis; VM, vastus lateralis; VL, biceps femoris; BF, gastrocnemius; GCM and tibialis anterior; TA) and foot pressure (F/F ratio, R/F ratio, Hallux, 2~5 toe, 1st MT, 2~4 MT, 5th MT, Midfoot, M/heel, and L/heel) during gait. RESULTS: Romberg test showed significantly increased loss of balance in the UVG group compared with the CON. In the forward position, the imbalance was significantly increased in the UVG and GVG groups compared to the CON. Muscle activity of VL, GCM, and TA significantly increased in the GVG group compared with the CON. Static foot pressure, 1st MT significantly increased in the GVG compared to the CON group. The 5th MT significantly decreased in the CON compared with the GVG group. The R/F ratio significantly decreased in the GVG compared to the CON group. In dynamic foot pressure, the 2~5 toe significantly increased in the GVG compared with the UVG group. The left 5th MT significantly decreased in the UVG compared with the CON and GVG groups. CONCLUSION: These results indicate that genu valgum has a negative effect on balance, muscle activity, and foot pressure during gait in female college students.

• Journal of Software Assessment and Valuation
• /
• v.17 no.2
• /
• pp.47-57
• /
• 2021

Neuromorphic technology is proposed to complement the shortcomings of existing artificial intelligence technology by mimicking the human brain structure and computational process with hardware. NA-IDE has also been proposed for developing neuromorphic hardware-based IoT applications. To implement an SNN model in NA-IDE, commonly used input data must be transformed for use in the SNN model. In this paper, we implemented a neural coding method encoder component that converts image data into a spike train signal and uses it as an SNN input. The decoder component is implemented to convert the output back to image data when the SNN model generates a spike train signal. If the decoder component uses the same parameters as the encoding process, it can generate static data similar to the original data. It can be used in fields such as image-to-image and speech-to-speech to transform and regenerate input data using the proposed encoder and decoder.

• Advanced Industrial SCIence
• /
• v.2 no.3
• /
• pp.29-36
• /
• 2023

The purpose of this study is to present basic data for hair color work plans that can consistently produce hair color design products for designers through analysis of gradient techniques among hair color design techniques. The research method was to select 10 photos of women that appeared in mass media from 2022 to September 15, 2023, extract color chips and RGB values using the Eyedropper Tool in Adobe Photoshop CS6, and convert the RGB values of the color chips into Munsell Conversion ( The data was converted into HV/C values of version 12.1.13a). Based on the extracted data, the gradient hair colors of female pop stars were analyzed by displaying the data on a color scale. As a result, in the I.R.I color scheme image scale, the image of female pop stars was more hard than soft. In addition, it was confirmed that the focus was on static rather than dynamic. Color matching images according to hair color were extracted with adjectives such as noble, decent, elegant, and subtle. Three hairstyles were created using this theme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.183-188
• /
• 2023

Game object inheritance and multiple components allow for visualization of system architecture, good code reuse, and fast prototyping. On the other hand, objects are more likely to rely on high latency between game objects and components, static casts, and lots of references to things like null pointers. Therefore, It is important to design a game in such a way so that the dependency of objects on multiple classes could be reduced and existing codes could be reused. Therefore, we designed the game to make the classes more modular by applying Dependency Injection and the design patterns proposed by the Gang of Four. Since these dependencies are attributes of the game object and the injection occurs only in the initialization pass, there is little performance degradation or performance penalty in the game loop. Therefore, this paper proposed an efficient design method to effectively reuse APIs in the design and implementation of survival games.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.311-317
• /
• 2023

An autofilter is a device that removes impurities contained in heavy fuel oil used in diesel engines of ships or power plants, and also automatically removes impurities accumulated in the filter through a reverse washing function. The reducer-integrated motor serves to rotate the filter at low speed to enable reverse automatic cleaning in the autofilter device. To achieve a low speed of 0.65 to 0.75 rpm in a reducer-integrated motor, a small motor that can operate at 97rpm at a rated voltage of 110 V and 112.5 rpm at 220 V is required. Additionally, a large gear ratio of 1/150 is required. To ensure the durability and reliability of these reducers, the strength of the gear must be evaluated at the design stage. In general, there is a limit to evaluating the stress and strain state according to the vibration characteristics acting on each gear in the driving state of the reducer through quasi-static analysis. Therefore, in this study, the operation characteristics of the auto filter's reducer-integrated motor were first analyzed using the rigid body dynamics analysis method. Then, this rigid body dynamics analysis model was extended to a flexible multibody dynamics analysis model to analyze the stress and strain states acting on each gear and evaluate the design feasibility of the gear.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.314-324
• /
• 1996

A high speed NMR quality evaluation sensor was designed , constructed and tested . The device consists of an NMR spectrometer coupled to a conveyor system. The conveyor was run at speeds ranging from 0 to 250 mm/s. Spectral of avocado fruits and one-dimensional magnetic resonance images of pickled olives were acquired while the samples were moving on a conveyor belt mounted through a 20Tesla NMR magnet with a 20 mm diameter surface coil and a 150 mm diameter imaging coil respectively. Fro a magnetic resonance spectrum analysis, motion through variations in the magnetic field tends to narrow spectral line width just like using sample rotation in high resolution NMR to narrow spectral line width. Spectrum analysis was used to detect the dry weight of avocado fruits using the ratio oil and water resonance peaks. Good correlations maximum r=0.970@ 50 mm/s and minimum r=0.894@250mm/s ) between oil and water resonance peak ratio and dry weight of avocados were observed at speeds ra ging from0 to 250mm/s. For the application of magnetic resonance imaging (MRI) method, the projections were used to distinguish between pitted and non-pitted olives . Effect of fruit position in the coil was tested and coil degree effects were noticed when projects were generated under dynamic conditions. Various belt speeds (up to 250mm/s) were tested and detection results were compared to static measurements. Higher classification errors were occurred at dynamic conditions compared to errors while olives were at rest.

• Structural Engineering and Mechanics
• /
• v.86 no.2
• /
• pp.167-180
• /
• 2023

This work applies a four-known quasi-3D shear deformation theory to investigate the bending behavior of a functionally graded plate resting on a viscoelastic foundation and subjected to hygro-thermo-mechanical loading. The theory utilizes a hyperbolic shape function to predict the transverse shear stress, and the transverse stretching effect of the plate is considered. The principle of virtual displacement is applied to obtain the governing differential equations, and the Navier method, which comprises an exponential term, is used to obtain the solution. Novel to the current study, the impact of the viscoelastic foundation model, which includes a time-dependent viscosity parameter in addition to Winkler's and Pasternak parameters, is carefully investigated. Numerical examples are presented to validate the theory. A parametric study is conducted to study the effect of the damping coefficient, the linear and nonlinear loadings, the power-law index, and the plate width-tothickness ratio on the plate bending response. The results show that the presence of the viscoelastic foundation causes an 18% decrease in the plate deflection and about a 10% increase in transverse shear stresses under both linear and nonlinear loading conditions. Additionally, nonlinear loading causes a one-and-a-half times increase in horizontal stresses and a nearly two-times increase in normal transverse stresses compared to linear loading. Based on the article's findings, it can be concluded that the viscosity effect plays a significant role in the bending response of plates in hygrothermal environments. Hence it shall be considered in the design.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.23-36
• /
• 2007

To overcome the limits of the static pile load test for large diameter drilled shafts, bi-directional low pressure pile load test (BDL PLT) has been used but this test method containes some problems that has not been solved basically. That is, BDL PLT has some problems: difficulty in jack (or cell) arrangement for large test capacity, void remain inside jack (or cell) due to the unrecovery of piston after test etc. In this study, bi-directional double-acting high pressure pile load test (BDH PLT W/DOJ) was developed and confirmed for a in-situ large diameter drilled shaft. At present, test specification of bi-directional pile load test (BDPLT) is being made, and severed main issues (such as, test kinds, test capacity, necessity of use of double-acting and attention of application to service pile) will be contained at the specification.

• Safety and Health at Work
• /
• v.14 no.1
• /
• pp.66-70
• /
• 2023

Background: Online teaching and learning extend the duration of using gadgets such as mobile phones and tablets. A prolonged usage of these gadgets in a static position can lead to musculoskeletal disorders (MSD). Therefore, this study aims to identify the risk factors related to musculoskeletal symptoms while using gadgets during work from home due to the COVID-19 pandemic. Method: A cross-sectional survey with online-based questionnaires was collected from the University of Indonesia, consisting of lecturers, students, and managerial staff. The minimum number of respondents was 1,080 and was defined by stratified random sampling. Furthermore, the dependent variable was musculoskeletal symptoms, while the independent were age, gender, job position, duration, activity when using gadgets, and how to hold them. Result: Most of the respondents had mobile phones but only 16% had tablets. Furthermore, about 56.7% have used a mobile phone for more than 10 years, while about 89.7% have used a tablet for less than 10 years. A multivariate analysis found factors that were significantly associated with MSD symptoms while using a mobile phone, such as age, gender, web browsing activity, work, or college activities. These activities include doing assignments and holding the phone with two hands with two thumbs actively operating. The factors that were significantly associated with MSD symptoms when using tablets were gender, academic position, social media activity, and placing the tablet on a table with two actively working index fingers. Conclusion: Therefore, from the results of this study it is necessary to have WFH and e-learning policies to reduce MSD symptoms and enhance productivity at work.