• 대한물리의학회지
• /
• 제12권4호
• /
• pp.39-46
• /
• 2017

PURPOSE: The effectiveness of the stretching to increase the range of motion of the joint, reduce the risk of injury, enhance athletic performance or decrease post exercise muscle soreness. This study was to compare the effect of the stretching method applied on the shortened hamstring muscle for flexibility, strength, pressure pain threshold value and muscle tone. METHODS: This study is a two-group pretest- posttest design. Fifty-four healthy young adults were randomly assigned to a vibration-assisted stretching group (VASG, n=27) or a static stretching group (SSG, n=27). Participants performed each stretch in 4 sets of 30 seconds each. A 30-second break time was provided between the sets. The range of motion, strength, pressure pain threshold values and muscle tone of the hamstring muscle were measured to compare the effects of the stretching methods. RESULTS: Both the VASG and the SSG participants showed significant improvement in the range of motion and strength (p<.05); however, the increase in the VASG was significantly higher than that in the SSG (p<.05). The pressure pain threshold values and muscle tone were significantly decreased only in the VASG (p<.05). CONCLUSION: These findings indicate that vibration-supported stretching is an effective intervention for people with hamstring shortening, with high pain level and muscle tone decrease.

• 대한물리의학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2017

PURPOSE: The purpose of this study was to examine the effects of treadmill gait training in an adjusted position from the functional training system on the gait and balance of chronic stroke patients. METHODS: Thirty chronic stroke patients were randomly assigned to either the experimental group, who received treadmill gait training in an adjusted position, or the control group, who received regular treadmill gait training. Both groups underwent a 30-minute comprehensive rehabilitation treatment before receiving an additional 20-minute treadmill gait training. This routine was repeated five times a week for four weeks. To measure the difference before and after training in walking and balance, patients were scored on the following: 10 m walking test (10 MWT), 6 minute walking distance (6 MWD), timed up and go test (TUG), and static standing balance test (stability index). RESULTS: While post-training scores of 10 MWT, 6 MWD, TUG, and stability index for both groups increased significantly compared with pre-training (p<.05), the experimental group showed greater improvement than the control group (p<.05). The scores of the experimental group increased significantly by 9% in the 10 MWT, 11% in 6 MWD, 13% in the TUG, 8% in the stability Index (eye opened), and 10% in the stability index (eye closed). CONCLUSION: Treadmill gait training in an adjusted position from the functional training system would be a useful gait training method to improve walking and balance of chronic stroke patients.

• Childhood Kidney Diseases
• /
• 제21권2호
• /
• pp.114-120
• /
• 2017

Purpose: The aim of this study was to determine the clinical characteristics, frequency of renal abnormalities and benefits of a top-down approach in children with their first febrile urinary tract infection (UTI). Methods: We reviewed 308 patients retrospectively who were admitted to Yeungnam University Hospital and were treated for their first febrile UTI from February 2006 to December 2013. We performed a comparative analysis of laboratory findings and results of imaging techniques including a Tc-99m dimercaptosuccinic acid (DMSA) renal scan. Results: Among the patients, 69% (213/308) were males, and 90% (277/308) had their first UTI episode during infancy. A DMSA renal scan was performed on all patients, and showed positive findings in 60% (184/308) of cases. Laboratory indices of inflammation were significantly higher in the DMSA-positive group (P< 0.05). There was a statistically significant difference in the age distribution between the two groups. In the DMSA-positive group, 165 patients underwent voiding cystourethrography (VCUG), and 58 (35%) cases demonstrated vesicoureteral reflux. In total, 110 patients in the DMSA-positive group, underwent repeat scanning at 6 months; 33 children (30%) demonstrated static scarring, but 77 (70%) had improved completely. The concordance of the ultrasonography (US) and VCUG was low. Older patients had more renal scarring. Conclusion: DMSA is a sensitive method for assessing the severity of inflammation and kidney injury. However, the ability of US to predict renal parenchymal damage was limited. A top-down approach in children with their first febrile UTI showed significant value.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.255-260
• /
• 2004

Recently, the technologies related to the swash plate type oil hydraulic piston pump are requiring extreme technologies to overcome the limit of high efficiency in cope with high speed and pressure, and are devoted to compact the unit, to gain low noise level, and to adopt electronic technologies, and the question regarding to maximize the mechanical efficiency, that is, to minimize the torque loss by minimizing the leakage loss in the relative sliding region but these are in trade-off relation that tribological responding is very difficult. Cylinder block-valve pate in high speed relative sliding motion has the characteristics that should be extremely controlled for the optimization of these leakage loss and mechanical efficiency, and pressure resistance designing of them is important for high pressure performance. But, studies on the stress analysis of these parts have not been performed briskly, so in this paper the stress distribution and the region where the highest displacement appears are described through the static stress analysis using CATIA V5. Through the future studies on these theme, it has the purpose of finding the suitable materials for the other parts as well as cylinder block and valve plate, in cope with high pressure operation through the stress analysis with the most similar conditions for the practical operation.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• International Journal of Aeronautical and Space Sciences
• /
• 제15권1호
• /
• pp.32-43
• /
• 2014

Automatic fiber placement (AFP) has become a popular processing technique for composites in the aerospace industry, due to its ability to place prepregs or tapes precisely in the exact position when complex parts are being manufactured. This paper presents the design, analysis, and manufacture of an AFP mandrel for composite aircraft fuselage skin fabrication. According to the design requirements, an AFP mandrel was developed and a numerical study was performed through the finite element method. Linear static load analyses were performed considering the mandrel structure self-weight and a 2940 N load from the AFP machine head. Modal analysis was also performed to determine the mandrel's natural frequencies. These analyses confirmed that the proposed mandrel meets the design requirements. A prototype mandrel was then manufactured and used to fabricate a composite fuselage skin. Material load tests were conducted on the AFP fuselage skin curved laminates, equivalent flat AFP, and hand layup laminates. The flat AFP and hand layup laminates showed almost identical strength results in tension and compression. Compared to hand layup, the flat AFP laminate modulus was 5.2% higher in tension and 12.6% lower in compression. The AFP curved laminates had an ultimate compressive strength of 1.6% to 8.7% higher than flat laminates. The FEM simulation predicted strengths were 4% higher in tension and 11% higher in compression than the flat laminate test results.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.72-78
• /
• 2008

본 연구에서는 블레이드 구조 변형 효과를 고려하여 스테이터-로터 상호간섭 케스케이드 모델의 성능평가를 위한 유체-구조 연계해석 시스템을 개발하였다. 고정된 스테이터와 회전하는 로터는 상호간섭 영향이 유동해석에 고려되었으며, 레이놀즈-평균화 난류 방정식인 Spalart-Allmaras 모델과 k-ω SST 난류 모델이 압축성 유동박리 효과를 고려한 유동하중을 예측하기 위해 적용되었다. 정적인 유체-구조 연계해석과 수렴율 증진을 효과적으로 수행하기 위하여 큰 인공 감쇠를 가지는 연계 Newmark 시간적분 기법을 적용하였다. 수치실험을 통해 탄성축 위치에 따른 구조변형 효과가 케스케이드 성능에 미치는 영향을 파악하였다. 구조변형 효과가 고려된 경우 일반적인 강체 블레이드 모델에 대한 성능예측 결과와 다소 차이가 유발될 수 있음을 보였으며 공력탄성학적 영향을 고찰하였다.

• 한국콘텐츠학회논문지
• /
• 제13권12호
• /
• pp.62-69
• /
• 2013

최근 HCI, 제품디자인, 인지과학 등에서 어포던스에 대한 많은 연구가 진행되고 있다. 또한 게임분야에서도 어포던스에 대한 개념을 적용하여 게이머와 게임 시스템간의 관계를 이해하고자 하는 시도가 증가하고 있다. 그러나 게임의 특성을 고려하지 않고 기존의 HCI에서 중요하게 다루는 사용편의성, 일관성, 유용성 측면으로 연구가 진행되는 문제가 발생하고 있다. 그래서 본 연구는 생태심리학에서 제시한 어포던스(Affordance: 행동유도성) 개념을 토대로 판타지, 다양성, 재미와 같은 게임의 특징을 고려한 어포던스를 규명하는 것을 목적으로 한다. 이를 위해 게임의 기본 장르인 액션게임에서 플랫폼 액션 장르의 게임을 대상으로 게임플레이 전 과정에 대한 Think aloud 방법을 적용하여 프로토콜 분석을 실시하였다. 그 결과 고정 상태로서의 정지, 이동적 어포던스, 변형상태로서의 변형연속, 단일생성, 단일소멸 어포던스, 물리적, 인지적 어포던스가 발견되었다. 본 연구결과는 게임을 어떻게 디자인해야 할지에 대한 중요한 디자인 지침을 제시할 것으로 기대된다.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.117-125
• /
• 2014

The temperature distribution of steady state rolling tires with detailed tread blocks is numerically predicted using the three dimensional full patterned tire model. A three dimensional periodic patterned tire model is constructed by copying 1-sector mesh in the circumferential direction. Using the static tire contact analysis, the strain cycles during one revolution are approximated with the strains at Guassian points of the elements which are sector-wise repeated within the same circular ring of elements, by neglecting the tire rolling effect. Based upon the multi-axial fatigue theory, the maximum principal strain is used to represent the combined effect of six strain components on the hysteretic loss. In the following, the deformation due to the inflation and vertical load is calculated using ABAQUS. Then heat generation rate in each element is calculated using an in-house code. Lastly, temperature distribution is calculated using ABAQUS again. Through the numerical experiments, the validity of the proposed prediction method is examined by comparing with the experiment and the temperature distribution of a patterned tire model is compared with those of the main-grooved simple tire model.

• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.56-60
• /
• 2006

액체 로켓 엔진용 가스발생기 개발을 위해서는 추진제 O/F ratio에 따른 연소 가스의 열역학적 물성치 예측이 필수적이다. 본 연구에서는 액체산소/Jet A-1 조합의 연료 과농 가스발생기의 실 추진제 연소 시험을 통해 O/F ratio 변화에 따른 연소 생성 가스의 온도를 계측하였다. 또한 연소실 내 동압 섭동 측정 및 정압 측정 결과를 이용하여 비열비, 가스 상수, 정압 비열과 같은 연소 가스의 열역학적 물성치를 간접적으로 산출해내었다. 본 실험값은 화학평형코드 결과를 통해 구한 보간 계수를 이용한 예측 결과와 비교해보았을 때 동일한 경향 및 유사한 값을 가지는 것으로 밝혀졌으며 이는 보간 계수 예측 방법이 설계 도구로 충분히 적용 가능하다는 결과를 확인하였다.