• 국제물리치료학회지
• /
• 제12권2호
• /
• pp.2370-2374
• /
• 2021

Background: Masticating is an activity that is free from temporal or spatial constraints, with an advantage that it can be combined easily with other treatment methods. While several studies have reported a positive effect of the intervention of chewing using the jaw on postural stability, only a few studies were conducted on stroke patients. Objectives: To investigated the effects of masticating chewing gum on the static and dynamic balancing of stroke patients. Design: Randomized cross-over study design. Methods: Nineteen stroke patients were randomly assigned to the chewing group or control group. BT4 was used to measure the static and dynamic balancing abilities. Pre-test measurements were taken before mastication of chewing gum, and post-test measurements were taken after 2 days. The stroke patients in the chewing group were guided to sit on a chair and chew gum for 3 min, and their balancing abilities were simultaneously measured. The balancing abilities of the control group patients were measured while they sat at rest without masticating chewing gum. Results: The chewing group showed significant increases in the measures of static balance (i.e., C90 area, trace length, X mean, and Y mean). In the between-group comparison, the measures of static balance were significantly higher in the chewing group than in the control group. Conclusion: These findings suggest that masticating chewing gum enhanced the static balancing ability of stroke patients. Thus, gum chewing should be considered a viable clinical intervention to control posture in stroke patients.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1303-1309
• /
• 2003

This paper presents the static and dynamic measurements for the strength and motion characteristics as well as the improved procedures to assess strength of wheel loaders. Two scenarios for static measurement were decided by which cylinder was actuating. The dynamic measurement was performed for two types of motion, that is, simple reciprocation of the working devices and actual working motion including traveling, digging and dumping. The measured items were stresses, cylinder pressures and strokes. Stress induced by bucket working showed higher level than that by boom working. The measured cylinder speeds were relatively superior to the design speeds. Working stress histories were thought to be closer to static rather than dynamic. A fully assembled FE model was prepared for structural analysis. In this paper, a more simple method was suggested to avoid nonlinearity caused by heave of rear frame under digging forces. Also how brake affected on structural behavior and digging force was examined closely in relation with tire pressure. It was confirmed that the overall stress level of wheel loader during turning traveling with loaded bucket was far lower than the yield stress of material.

• 동력기계공학회지
• /
• 제19권6호
• /
• pp.19-25
• /
• 2015

The unsteady-state, incompressible and three-dimensional large eddy simulation(LES) was carried out to analyze the aerodynamic performance of three-dimensional small-size axial fan(SSAF) with the different depth of bellmouth. The static pressure coefficients analyzed by LES predict a little bit larger than measurements except stall region regardless of the installation depth between SSAF and bellmouth. Moreover, static pressure efficiencies analyzed by LES show about maximum 30% at the actual operating point ranges, but measurements do not. Therefore, if the blades of conventional SSAF have some more rigidity and complete dynamic balance, the aerodynamic performance of SSAF will be some more improved. In consequence, LES shows the best prediction performance in comparison with any other Reynolds averaged Navier-Stokes(RANS) method.

• The Journal of Korean Physical Therapy
• /
• 제35권6호
• /
• pp.200-205
• /
• 2023

Purpose: The purpose of this study is to find out how gait training with shoulder-back assistive device affects dynamic and static balance, gait of patients with stroke and to help improve body alignment, balance, and gait ability in stroke patients. Methods: Measurements were taken of the 20 subjects before intervention without shoulder-back assistive device, after intervention with device, and follow up after an hour compared. Berg balance scale used to evaluate dynamic balance; wii balance board was used to measure static balance; and gait ability were measured by timed up and go test and 10-meter walk test. To analyze the results, a one-way repeated measures analysis of variance was implemented to compare the measurements. Results: The results showed that, after wearing the shoulder-back assistive device, the subjects' dynamic balance statistically significantly improved; no statistically significant difference was observed in static balance, although their balance ability was enhanced; and their increase in gait ability was statistically significant. Conclusion: This study proved that gait training combined with a shoulder-back assistive device positively impacted dynamic and static balance, gait of patients with stroke.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.940-951
• /
• 2009

A comparative study on dynamic and static measurement of initial stiffness was conducted. Because soil stiffness decreases even at very small strains, the initial stiffness has been measured by dynamic tests using shear wave velocity measurement. On the other hand, due to the advance of local strain measurement, the triaxial testing device is capable of measuring the static initial stiffness. It has been known that initial stiffness measured by static triaxial tests is generally lower than that measured by dynamic tests possibly due to the limitation of static measurement of displacement at very small strains. This study presents experimental results indicating that the elastic shear moduli could be the same both in dynamic and static measurements owing to the soil anisotropy induced by anisotropic stresses.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1532-1536
• /
• 2020

For ensuring nuclear safeguards, we report the analytical signal-detection performance of thermal ionization mass spectrometry (TIMS) with continuous heating for the measurement of isotopic ratios in samples containing ultra-trace amounts of uranium. As methods for detecting uranium signals, peak-jumping mode using a single detector and static mode using multiple detectors were examined with U100 (10% ²³⁵U-enriched) uranium standard samples in the femtogram-to-picogram range. Uranium isotope ratios, n(²³⁵U)/n(²³⁸U), were measured down to levels of 1 fg and 3 fg in static and peak-jumping modes, respectively, while n(²³⁴U)/n(²³⁸U) and n(²³⁶U)/n(²³⁸U) values were measured down to levels of 100 fg in both modes. In addition, the dependency of the ²³⁸U signal intensity on sample quantity exhibited similar tendencies in both modes. The precisions of the isotope ratios obtained in the static mode over all sample ranges used in this study were overall slightly higher than those obtained in peak-jumping mode. These results indicate that isotope ratio measurements by TIMS with continuous heating are almost independent of the detection method, i.e., peak-jumping mode or static mode, which is characteristic of isotope-ratio measurements using the TIMS method with continuous heating. TIMS with continuous heating is advantageous as it exhibits the properties of multiple detectors within a single detector, and is expected to be used in various fields in addition to ensuring nuclear safeguards.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.65-72
• /
• 2006

Heat transfer augmentation in heat exchangers has received much attention in recent years, mainly due to energy efficiency and environmental considerations. Many active and Passive techniques are currently being employed in heat exchangers, with some inserts providing a cost-effective and efficient means of augmenting heat transfer. The Purpose of this paper is to determine the pressure loss and heat transfer characteristics of a heat exchanger using static mixing technology. Experimental measurements were taken on two set-ups: a single tube heat exchanger and a shell-tube heat exchanger with two static mixing inserts. It was concluded that the static mixing inserts resulted in an increase in the pressure loss and heat transfer characteristics as can be expected.

• 대한기계학회논문집B
• /
• 제22권9호
• /
• pp.1195-1207
• /
• 1998

Periodic pulsations in the static pressure near turbine surfaces as blade rows move relative to each other is one of the important sources of turbine unsteadiness. The present experiment aims to investigate the effect of the static pressure pulsations on the interaction of film coolant flows from two rows of staggered holes with mainstream and its effect on film cooling heat transfer. Potential flow pulsations are generated by the rotating shutter mechanism installed downstream of the test section, The free-stream Strouhal number based on the boundary layer thickness is in the range of 0.033 - 0.33, and the amplitude of about 10-20%. Measured are time-averaged and phase-averaged velocity variations, pressure variations and temperature distributions of the flow field. Experimental conditions are identified by boundary layer measurements. Injectant behavior is characterized by the measurements of unsteady pressure in the plenum chamber and free-stream static pressure. The film cooling effectiveness is evaluated from the insulated wall temperature measurement. It has been found that bulk flow pulsation provides very large diffusion of the injectants and the effectiveness is significantly reduced by the flow pulsations.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권3호
• /
• pp.117-122
• /
• 2014

In CDGPS, ambiguity resolution is determined by the performance of a floating solution, and thus, the performance needs to be improved. In the case of precise positioning at a stationary position, the batch method using multiple measurements is used for the accuracy improvement of a position. The position accuracy performance of a floating solution is outstanding, but it has a problem of high computation cost because all measurements are used. In this study, to improve the floating solution performance of the initial static user in CDGPS, a floating solution method using a recursive filter was implemented. A recursive filter estimates the position solution of the current epoch using the position solution of up to the previous epoch and the pseudorange measurement of the current epoch. The computation cost of the floating solution method using a recursive filter was found to be similar to that of the epoch-by-epoch method. Also, based on actual GPS signals, the floating solution performance was found to be similar to that of the batch method. The floating solution using a recursive filter could significantly improve the performance of the prompt initial position and ambiguity resolution of the initial static user.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.295-298
• /
• 1996

In distillation column control, secondary measurements such as temperatures and flows are widely used in order to infer product composition. This paper addresses the design of static estimators using the secondary measurements for estimating the product compositions of the multicomponent distillation columns. Based on the unified framework for the estimator problems, the relationships among several typical static estimators are discussed including the effect of the measured inputs. Design guidelines for the composition estimator using PLS regression are also presented. The estimator based on the guidelines is robust to sensor noise and has a good predictive power.