• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1354-1359
• /
• 2007

This paper discusses the acoustic performance of simple expansion chamber using computational fluid dynamics(CFD). The CFD model consists of an axisymmetric grid with a single period sinusoid of acceptable amplitude and duration imposed at the inlet boundary condition. The time history of the static pressure is recorded at two points, one in the inlet pipe and one point in outlet pipe. The time history of the static pressure is converted to the frequency domain using Fourier Transform and the transmission loss (TL) of the muffler is obtained from the ratio of the static pressure at the inlet and outlet pipe. The transmission loss of CFD result is compared with that of the computational acoustic analysis using the boundary element method (BEM). There are some differences in two results due to the pressure drop according to the inlet and outlet pipe length. Therefore, the effects of the pressure drop to the transmission loss have to be considered.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.891-918
• /
• 2015

In many of microdevices a part of a microbeam is covered by a piezoelectric layer. Depend on the application a DC or AC voltage is applied between upper and lower side of the piezoelectric layer. A common method in many of previous works for evaluating the response of these structures is discretizing by Galerkin method. In these works often single mode shape of a uniform microbeam i.e. the microbeam without piezoelectric layer has been used as comparison function, and so the convergence of the solution has not been verified. In this paper the Galerkin method is used for discretization, and a comprehensive analysis on the convergence of solution of equation that is discretized using this comparison function is studied for both clamped-clamped and clamped-free microbeams. The static and dynamic solution resulted from Galerkin method is compared to the modal expansion solution. In addition the static solution is compared to an exact solution. It is denoted that the required numbers of uniform microbeam mode shapes for convergence of static solution due to DC voltage depends on the position and thickness of deposited piezoelectric layer. It is shown that when the clamped-clamped microbeam is coated symmetrically by piezoelectric layer, then the convergence for static solution may be obtained using only first mode. This result is valid for clamped-free case when it is covered by piezoelectric layer from left clamped side to the right. It is shown that when voltage is AC then the number of required uniform microbeam shape mode for convergence is much more than the number of required mode in modal expansion due to the dynamic effect of piezoelectric layer. This difference increases by increasing the piezoelectric thickness, the closeness of the excitation frequency to natural frequency and decreasing the damping coefficient. This condition is often indefeasible in microresonator system. It is concluded that discreitizing the equation of motion using one mode shape of uniform microbeam as comparison function in many of previous works causes considerable errors.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.966-972
• /
• 2014

The Lattice Boltzmann Method (LBM) has attracted attention as an alternative numerical algorithm for solving fluid mechanics, and its intrinsic unsteadiness and weak numerical damping make it more suitable for aeroacoustic problems. In this paper, applicability of the LBM for solving flow noise problems is tested by applying it to predict transmission loss of a simple expansion silencer. The time history of the static pressure is recorded at the inlet and outlet pipes. The transmission loss (TL) of the muffler is computed by using three point method and two source method, respectively. The TL calculated using the LBM is compared with that computed using finite element method (FEM) and measured data. It is found through these comparisons that the LBM is capable of predicting TL of the simple expansion silencer accurately, which it is difficult to predict using the conventional CFD methods based on the RANS solvers.

• Wind and Structures
• /
• 제25권6호
• /
• pp.589-608
• /
• 2017

A novel probabilistic approach is presented for estimating the equivalent static wind loads that produce a static response of the structure, which is "equivalent" in a probabilistic sense, to the extreme dynamic responses due to the unsteady pressure random field induced by the wind. This approach has especially been developed for complex structures (such as stadium roofs) for which the unsteady pressure field is measured in a boundary layer wind tunnel with a turbulent incident flow. The proposed method deals with the non-Gaussian nature of the unsteady pressure random field and presents a model that yields a good representation of both the quasi-static part and the dynamical part of the structural responses. The proposed approach is experimentally validated with a relatively simple application and is then applied to a stadium roof structure for which experimental measurements of unsteady pressures have been performed in boundary layer wind tunnel.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(4)
• /
• pp.404-404
• /
• 1996

In order to ensure a concrete expansion anchor is suitable for a given application, the load resistance behavior of the anchor must be known. ASTM E488 provides a standard method of testing expansion anchors for static and dynamic loads. Due to the many types of anchors available commercially and the large variability of applications, the ASTM does not delineate all details or requirements necessary to comprehensively determine the dynamic load behavior of concrete expansion anchors. A test program is presented in this paper which was developed and implemented to determine the cyclic load behavior of wedge-type concrete expansion anchors. Test results are also presented along with a discussion of the behavior of anchors, and their suitability for use.

• 대한교통학회지
• /
• 제26권4호
• /
• pp.123-133
• /
• 2008

최근 교통 물류 분야에서도 유비쿼터스 환경의 정보수집체계 및 이를 응용한 서비스 개발의 필요성이 매년 높아지고 있다. 프로브 차량과 무선통신기술을 활용한 교통정보 수집체계는 그 대표적인 사례로 차량의 기종점 자료를 이용하여 시간대별 OD를 산정하는 것이 가능하다. 그러나 프로브 차량 정보를 활용하여 산정된 OD는 시간적 공간적으로 변동되는 표본OD이기 때문에 이를 정적OD로 전환하기 위해서는 수집정보를 집적하여 적정 표본율을 산정하고, 표본OD를 전수화하는 과정이 필요하다. 본 연구는 제주시를 대상으로 수집된 실제 데이터를 표본OD 산정 및 전수화 알고리즘에 적용하여 표본OD를 산정하고 이를 전수화하였다. 각 링크별 관측교통량과 배분교통량과의 오차를 비교 검토한 결과 링크별 관측교통량 과 배분교통량의 평균 오차율은 22.9%, 상 하위 10%의 이상 자료를 제거한 후의 평균 오차율은 17.6%로 각각 나타났다. 본 연구는 기존OD가 존재하지 않는 지역에서 프로브 차량의 경로정보를 활용하여 정적OD를 산정하였다는 점과 적정 오차율 내 수렴을 위한 적정 표본율을 제시하였다는 점에서 그 의의를 찾을 수 있다.

• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.3-10
• /
• 2018

It's not practical to collect all information at the entire degrees of freedom of finite element model. The incomplete measurements should be expanded for subsequent analysis and damage detection. This work presents the analytical methods to expand the incomplete static or dynamic response data. Using the expanded data, introducing the concept of residual force, and minimizing the performance index expressed as the stiffness matrix and its difference before and after damage, the variation in stiffness matrix is derived. Based on the difference in the stiffness matrix, the damage detection method of structures is also provided. The validity of the proposed methods is illustrated in a numerical application, the numerical results are analyzed for applications, and the applicability of both methods is investigated.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.234-241
• /
• 2011

본 논문은 출력 전압의 선형성을 확장하기위한 정적 과변조 기법에 대한 것이다. 제안하는 방식은 기본파 전압 크기 지령에 해당하는 변조 지수로부터 직접 과변조 영역에서의 순시치 전압 크기를 얻어내는 방식을 취하며, 전압 위상 지령의 형태도 간소화시킨 간단한 정적 과변조 기법이다. 제안된 기법은 지령치 전압 크기 계산시 삼각함수의 연산이 불필요하다. 순시치 전압 크기와 유지각은 출력전압의 크기가 변조 지수에 해당하는 지령치 전압의 기본파 크기와 동일하도록 푸리에 급수 전개를 통하여 미리 계산된 근사식을 이용한다.

• Structural Engineering and Mechanics
• /
• 제8권4호
• /
• pp.343-360
• /
• 1999

This work applies a structural analysis method based on an analytical solution from the Fourier series which transforms a half-range cosine expansion into a static solution involving plated structures. Two sub-matrices of in-plane and plate-bending problems are also formulated and coupled with the prescribed boundary conditions for these variables, thereby providing a convenient basis for a numerical solution. In addition, the plate connection are introduced by describing the connection between common boundary continuity and equilibrium. Moreover, a simple computation scheme is proposed. Numerical results are then compared with finite element results, demonstrating the numerical scheme's versatility and accuracy.

• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1582-1589
• /
• 1994

The characteristics Prandt1-Meyer expansion of supersonic flow with condensation through a wavy wall in a channel are investigated by experiment and numerical direct marching method of characteristics. In the present study, for the case of moist air flow in the type of indraft supersonic wind tunnel, the dependency of location of formation and reflection of the oblique shock wave generated by the wavy wall and the distribution of flow properties, on the specific humidity and temperature at the entrance of wavy wall and the attack angle of the wavy wall to the main stream is clarified by schlieren photograph, distribution of static pressure and Mach number, and plots of numerical results. Also, we confirm that the wavy wall plays an important key role in the formation of oblique shock wave, and that the effect of condensation on the flow field appears apparently.