• 한국지능시스템학회논문지
• /
• 제26권2호
• /
• pp.135-140
• /
• 2016

비동기 순차 회로를 위한 교정 제어기는 회로를 재설계하지 않고도 회로 내에 존재하는 여러 고장을 탐지하고 극복하는 능력을 보인다. 이번 논문에서는 교정 제어기의 크기를 줄이기 위한 방법으로서 정적 교정 제어기(static corrective controller)를 제안한다. 동적 제어기에 비해 정적 제어기는 제어기 상태가 필요 없으므로 조합 회로(combinational circuit)만으로 구현 가능하다. 본 논문에서는 상태 천이 고장에 대한 정적 내고장성 교정 제어기가 존재할 조건과 설계 과정을 규명한다. 또한 제안된 제어 기법을 FPGA로 구현된 SEU 오류 카운터에 적용하여 그 효용성을 실험적으로 검증한다.

• 한국농공학회논문집
• /
• 제65권5호
• /
• pp.1-11
• /
• 2023

Due to climate change and aging of reservoirs, damage to embankment slopes is increasing. However, the safety diagnosis of the reservoir slope is mainly conducted by visual observation, and the time and economic cost are formidable to apply soil mechanical tests and slope stability analysis. Accordingly, this study presented a predicting method for the compaction and strength characteristics of the reservoir embankment soil using a portable static cone penetration test. The predicted items consisted of dry density, cohesion, and internal friction angle, which are the main factors of slope stability analysis. Portable static cone penetration tests were performed at 19 reservoir sites, and prediction equations were constructed from the correlation between penetration resistance data and test results of soil samples. The predicted dry density and strength parameters showed a correlation with test results between R² 0.40 and 0.93, and it was found to replace the test results well when used as input data for slope stability analysis (R² 0.8134 or more, RMSE 0.0320 or less). In addition, the prediction equations for the minimum safety factor of the slope were presented using the penetration resistance and gradient. As a result of comparing the predicted safety factor with the analysis results, R² 0.5125, RMSE 0.0382 in coarse-grained soil, R² 0.4182 and RMSE 0.0628 in fine-grained soil. The results of this study can be used as a way to improve the existing slope safety diagnosis method, and are expected to be used to predict the characteristics of various soils and inspect slopes.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.89-94
• /
• 2018

In this paper, we implemented a static analysis tool for weakness. We implemented on JavaCC using syntax information and control flow information among various information. We also tested the performance of the tool using Juliet-test suite on Eclipse. We were classified using information necessary for diagnosis and diagnostic methods were studied and implemented. By mapping the information obtained at each compiler phase the security weakness, we expected to link the diagnostic method with the program analysis information to the security weakness. In the future, we will extend to implement diagnostic tools using other analysis information.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.635-645
• /
• 2023

This study aims to simulate the mechanical behavior of the total prosthesis model of Charnley (CMK3) by the 3D finite element method and to determine the state of the stresses in the femoral components (prosthesis, cement, and bone). The components are subjected to a dynamic load due to three activities (normal walking, climbing stairs, and standing up a chair). Static loading is by selecting the maximum load for the same activities mentioned. The results show that the maximum stresses in the proximal part of the cement are very important. Moreover, new results obtained for different parameters were discussed in detail. It is understood that current research provides important lessons for the surgeon to contribute to the clinical diagnosis of durable implantations and a better understanding of the process of bone remodeling and bone prosthesis.

• Imaging Science in Dentistry
• /
• 제36권4호
• /
• pp.199-206
• /
• 2006

Purpose: The purpose of this study was to evaluate comparison of static MRI and pseudo-dynamic (cine) MRI in temporomandibular joint (TMJ) disorder patients. Materials and Methods: In this investigation, 33 patients with TMJ disorders were examined using both conventional static MRI and pseudo-dynamic MRI. Multiple spoiled gradient recalled acquisition in the steady state (SPGR) images were obtained when mouth opened and closed. Proton density weighted images were obtained at the closed and open mouth position in static MRI. Two oral and maxillofacial radiologists evaluated location of the articular disk, movement of condyle and bony change respectively and the posterior boundary of articular disk was obtained. Results: No statistically significant difference was found in the observation of articular disk position, mandibular condylar movement and posterior boundary of articular disk using static MRI and pseudo-dynamic MRI (P<0.05). Statistically significant difference was noted in bony changes of condyle using static MRI and pseudo-dynamic MRI (P<0.05). Conclusion: This study showed that pseudo-dynamic MRI didn't make a difference in diagnosing internal derangement of TMJ in comparison with static MRI. But it was considered as an additional method to be supplemented in observing bony change.

• 정보보호학회논문지
• /
• 제30권4호
• /
• pp.735-743
• /
• 2020

시큐어코딩은 악의적인 공격 혹은 예상치 못한 오류에 대한 강인함을 제공해줄 수 있는 안전한 코딩 기법으로 정적분석도구의 지원을 통해 취약한 패턴을 찾아내거나 오염 데이터의 유입 가능성을 발견한다. 시큐어코딩은 정적기법을 적극적으로 활용하는 만큼 룰셋에 의존적이라는 단점을 가지며, 정적분석 도구의 복잡성이 높아지는 만큼 정확한 진단이 어렵다는 문제점을 안고 있다. 본 논문은 시큐어코딩을 지원하는 목적으로 기계학습 기법 중 DNN과 CNN, RNN 신경망을 이용하여 개발보안가이드 상의 주요 보안약점에 해당하는 패턴을 학습시키고 분류하는 모델을 개발하며 학습 결과를 분석한다. 이를 통해 기계학습 기법이 정적분석과 더불어 보안약점 탐지에 도움을 줄 수 있을 것으로 기대한다.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.29-34
• /
• 2015

DC bus electrolytic capacitors are used in variety of equipments as smoothing element of the power converters because it has high capacitance for its size and low price. It is responsible for frequent breakdowns of many static converters and inverter drive systems. Therefore it is important to diagnosis monitoring the condition of an electrolytic capacitor in real-time to predict the failure of power converter. In this paper, the on-line remote diagnosis monitoring system for DC BUS electrolytic capacitors of power converter using low-cost type Zigbee communication modules is developed. To estimate the health status of the capacitor, the equivalent series resistor(ESR) of the component has to be determined. The capacitor ESR is estimated by using RMS computation using AC coupling method of DC link ripple voltage/current. The Zigbee communication-based experimental results show that the proposed remote DC capacitor diagnosis monitoring system can be applied to DC/DC converter and UPS successfully.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1761-1766
• /
• 2008

This paper deals with a novel autocalibration method of three-axis micromachined accelerometers applied to a new golf swing diagnosis equipment for golfers. This diagnosis equipment can help golfers monitor and anlalyze their swing posture and therefore modify their swing action to get better score and enjoy their lives through golf. The micromachined accelerometers to get information of the motion are the essential part of the putting club to measure the three-axis acceleration as accurately as possible. This paper presents an efficient autocalibration algorithm to find the offset and sensitivity of accelerometers by only using the static measurement data at six different positions. The experimetnal results on the developed putters show the validity of the proposed algorithm for the new smart putter.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.425-435
• /
• 2017

In this work, an overview of flow diagnosis in a shock tunnel is made by means of using established techniques that are easy to setup, economical to arrange, and simple to measure. One flow condition was considered having Mach number of 6 at the nozzle-exit, regarded as freestream. Measured aerothermodynamic data such as shock wave speed, wall static and total pressures, surface heat flux, and shock stand-off distance ahead of test model showed good agreement with calculation. This study shows an overall procedure of flow diagnosis in a shock tunnel in a single manuscript. Outcomes are thought to be useful in the field of education and also in a preliminary stage of high-speed vehicle design and tests, that need to be performed within a short time with decent accuracy.

• The Korean Journal of Pain
• /
• 제28권2호
• /
• pp.105-108
• /
• 2015

Background: The most definitive diagnosis of neck pain caused by facet joints can be obtained through cervical medial branch blocks (CMBBs). However, intravascular injections need to be carefully monitored, as they can increase the risk of false-negative blocks when diagnosing cervical facet joint syndrome. In addition, intravascular injections can cause neurologic deficits such as spinal infarction or cerebral infarction. Digital subtraction angiography (DSA) is a radiological technique that can be used to clearly visualize the blood vessels from surrounding bones or dense soft tissues. The purpose of this study was to compare the rate of detection of intravascular injections during CMBBs using DSA and static images obtained through conventional fluoroscopy. Methods: Seventy-two patients were included, and a total of 178 CMBBs were performed. The respective incidences of intravascular injections during CMBBs using DSA and static images from conventional fluoroscopy were measured. Results: A total of 178 CMBBs were performed on 72 patients. All cases of intravascular injections evidenced by the static images were detected by the DSAs. The detection rate of intravascular injections was higher from DSA images than from static images (10.7% vs. 1.7%, P < 0.001). Conclusions: According to these findings, the use of DSA can improve the detection rate of intravascular injections during CMBBs. The use of DSA may therefore lead to an increase in the diagnostic and therapeutic value of CMBBs. In addition, it can decrease the incidence of potential side effects during CMBBs.