• 한국콘텐츠학회논문지
• /
• 제14권5호
• /
• pp.107-116
• /
• 2014

본 연구는 지역사회네트워크 기반 사회복지프로그램 기획을 준비함에 있어 컨셉트 맵핑을 활용하고 그 적용가능성을 경험적으로 확인하는 것이다. 컨셉트 맵핑은 다양한 이해관계자들 사이의 모호하고 복잡한 아이디어를 구조화하여 시각적으로 제시해 주는 의사결정 도구이다. 이미 상담, 간호, 공중보건 등 휴먼서비스 영역을 중심으로 프로그램 기획 및 평가 과정에서 나타나는 복잡하고 추상적인 아이디어를 개념화하는데 활용되고 있다. 최근, 우리나라에서도 상담 및 의료 영역에서 서비스 제공자와 이용자 간의 존재하는 성과의 차이를 경험적으로 인지하고, 합의를 이끌어 내는 도구로 활용하고 그 효과성이 발표되고 있다. 본 연구에서는 부산광역시 북구에서 아동 청소년을 대상으로 진행되고 있는 부산공동모금회지원 CI사업의 3차년도 사업기획을 준비하면서 사업주체들이 기대하는 성과를 컨셉트 맵핑을 활용하여 개념화하였다. 컨셉트 맵핑은 준비 단계, 아이디어 수집 단계, 서술문 구조화 단계, 표현 단계, 분석결과 해석 단계, 유용화 단계로 이루어졌다. 참여자들은 부산 북구 사회복지기관 종사자 11명이였으며, 이들이 제시한 서술문은 총 60개였다. 이들이 제시한 서술문을 유사성 행렬 형태로 전환하여 다차원 척도법 분석을 실시하였다. 군집은 총 5개로, '아동 청소년의 인식 및 태도변화', '아동 청소년 체계의 변화', '우호적인 지역사회 형성', '지역주민의 변화', '사업공급주체의 변화'였다. 이 중 가장 우선적으로 성취되어야 할 성과는 '아동 청소년의 인식 및 태도 변화'로, 이 성과를 중심으로 3차년도 사업을 기획하게 되었다. 컨셉트 맵핑을 활용하여 성과를 개념화하는 의사결정과정을 거치면서, 참여 구성원들은 사업의 성과에 대해 명확하게 개념화하였고, 이 성과에 대한 합의가 도출되었다.

• 한국콘텐츠학회논문지
• /
• 제16권10호
• /
• pp.150-162
• /
• 2016

정부의 R&D투자가 실제적으로 기업의 R&D투자를 진작시키는데 영향을 주고 있는지에 대해서 아직 합의된 결과가 도출되지 않았다. 한편 2016년도의 주요부처 정부R&D 예산이 삭감된 가운데 대기업에 대한 정부R&D투자는 줄이고 중소 중견기업에 대한 투자를 늘리기로 하여 이러한 정책이 향후 효과가 있을지에 대한 실증 분석이 요구된다. 이를 위해 국가과학기술지식정보서비스(NTIS)와 공시된 재무제표를 이용하여 2012년부터 2014년까지 1301개의 데이터를 기초로 이원고정효과모형과 이원확률효과모형을 사용하였다. 표본은 상장기업만을 대상으로 했으며 기업규모별(대기업, 중견기업, 중소기업)로 정부R&D투자가 기업R&D투자에 미치는 영향을 분석하였다. 분석결과 대기업에 대한 정부R&D투자는 다소 유의한 범위를 벗어나기는 하였으나 구축효과가 있는 것으로 나타났고, 유의하게 중견기업과 중소기업은 보완효과가 있는 것으로 나타났다. 이러한 연구결과는 현재 정부 정책의 방향이 합당함을 보이고 있다. 이는 정부의 제약된 자원을 효율적으로 배분하여 중소 중견기업의 자체 R&D투자를 유도하고 나아가 글로벌 강소기업의 혁신에 도움이 될 것으로 기대된다.

• 한국해양환경ㆍ에너지학회지
• /
• 제11권1호
• /
• pp.55-62
• /
• 2008

본 논문에서는 현재 시행되고 있는 우리나라의 해양관련 환경영향평가와 협의제도의 현황과 문제점을 파악하여 관련 제도의 개선방향을 연구하였다. 또한 해양환경관리법상 해역이용영향 검토기관(이하 검토기관이라 함)의 기능과 역할 및 수행실적을 조사하여 SWOT 분석을 실시하였고, 나아가서 운영상 개선사항과 발전방향을 제안하였다. 2007년 검토기관에서 수행한 실적은 총 358건으로, 해역이용협의서가 165건(46.1%)으로 가장 많았고, 환경영향평가서 104건(29.0%), 그리고 사전환경성검토서가 89건(24.9%)이었다. 해역이용협의의 내용별로는 공유수면점 사용, 공유 수면매립과 바다골재채취 관련이 각각 41%, 32%와 21%를 차지하였다. 그러나 이러한 제도시행으로 해역이용개발 행위가 해양환경에 미치는 악영향을 최소화하고 있지만, 사전예기능으로서의 한계와 여러 가지 내용적 그리고 제도상운영상 측면에서 보완하고 개선해야 할 문제점이 지적되었다. 검토기관의 전문성, 공정성과 효율성을 확보하는 것이 매우 중요하고, 이를 위해서는 고유 기능과 역할을 극대화시킬 수 있는 제도적 개선과 운영상 지원이 필요하며, 동시에 자체적으로 적극적인 발전전략을 수립함으로써 전문적인 검토기관으로서의 정체성 확보와 위상을 정립시켜야 할 것이다. 연안관리의 실효성을 확보하기 위해서는 효율적인 해역이용협의제도를 지향하고, 주무부처의 해양환경관리에 대한 구동력과 능동성을 강화 확립해 나가야 할 것이다.

• 대한치과보철학회지
• /
• 제45권4호
• /
• pp.492-505
• /
• 2007

Statement of problem: An orthodontic miniscrew implant has been used as a skeletal anchorage for orthodontic treatment. However, any relation among the influence of the cortical bone, morphologic differences of orthodontic miniscrew implants and new bone formation hasn't been made clear yet. Purpose: The purpose of this study was to evaluate whether the orthodontic miniscrew implant could work as an intraoral skeletal anchorage immediately and stably for orthodontic treatment after insertion of it. Material and methods: Two types of orthodontic miniscrew implants were used in this experiment; tapered type and straight type. One hundred and sixty eight orthodontic miniscrew implants were inserted into the tibiae of 21 rabbits and sacrificed on 3, 7, 11, 14, 21 and 28days later after insertion of them to study removal torque values and histologic and histomorphometric analyses. Results: The results were as follows. 1. The removal torque values of the tapered type were higher than those of the straight type in all groups(p<0.05). 2. There wasn't any distinguishing differences between the tapered type and the straight type about the new bone formation percentage. 3. The removal torque values for both the tapered type and the straight type were gradually decreased at early stages of the test but started to increase at the 7 days group of the straight type and the 11 days group of the tapered type. 4. New bone formation percentage was increased gradually for both the tapered and the straight types as time passed(p<0.05). 5. It was found that the tapered type showed lower values in the cortical bone about both the maximum equilibratory stress distribution and the maximum principal stress distribution than the straight type in linear finite elements analysis. Conclusion: According to the research, the removal torque values were decreased at 7 days group of the tapered type and 11 days group of the straight type after the insertion of the orthodontic miniscrew implants in tibiae of rabbits. Considering the human bone activity, it is better to apply the orthodontic force $3{\sim}4$ weeks later than to apply it immediately after the insertion of orthodontic miniscrew implants. Considering that general orthodontic force is about $250{\sim}500$ grams, the tapered type can be worked as a stable skeletal anchor age in an orthodontic treatment even if the orthodontic force is applied on it immediately after the insertion of it.

• 한국과학교육학회지
• /
• 제24권3호
• /
• pp.468-480
• /
• 2004

우리 나라 교육과정은 총론과 각론이 괴리되고 있다는 비판을 받고 있다. 총론과 각론의 괴리가 나타나는 주요 이유는 총론 연구개발팀이 순수 교육학 전공자 중심으로 구성되어 각론의 특성을 반영한 총론 및 교과 교육과정 개발 지침 개발, 개발된 각론의 검토 및 피드백 제공이 어렵고, 또한 교육과정 개발 기관이 사안 발생 때마다 임시로 지정되기 때문에 교육과정 개발을 대비하여 사전에 기초 연구를 하기 어려우며, 교육과정 개발 기간도 지나치게 짧아 각론팀에서 총론의 취지와 교사의 요구를 충분히 반영하기 어렵기 때문이다. 그 결과 (1) 제7차 교육과정의 주요 변화 내용인 심화 보충형 수준별 교육과정 적용 시기에서 총론과 각론의 불일치 현상이 나타나고, (2) 심화 과정의 성격, 지도 및 평가 등에 대해 명확한 설명이 없어 교과서 집필 및 학습 지도에서 혼선이 유발되고, (3) 교과서 집필자나 교사가 교육 내용의 범위나 수준을 파악하기 어려워 학습량 적정화의 취지가 제대로 구현되지 못하였다. 따라서 '교육과정개발센터'를 지정 운영하여 교육과정에 대한 상시 연구 체제를 구축하고, 총론연구팀과 각론연구팀의 유기적 협조체제를 구축하여야 한다. 또한 과학과 교육과정 연구 개발 기간을 최소한 2년 이상으로 하고, 교육과정 개발 과정에 주요 전공별 과학자를 포함시키는 것이 바람직하다. 그리고 교육과정은 교과서 집필자나 교사가 중요한 사항을 쉽게 이해할 수 있도록 현행보다 구체화되어야 하며, 교육과정 해설서는 최소한 교과서 개발 시작 이전까지는 집필되어야 한다.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.280-293
• /
• 2004

Statement of problem. Glass fiber post is one of recent developments to accommodate esthetic restoration for endodontically treated teeth. This has many advantages over conventional post system in physical properties, esthetic factor, risk of root and restoration fracture, adhesion to core, radiopacity, removal and retrievabilty, biocompatibility and chemical stability. Purpose. This in vitro study was to evaluate the most suitable type of resin core for the glass fiber post through surveying the fracture modes and the maximum load that fractures the tooth. Material and methods. 50 sound maxillary premolars restored with glass fiber posts($ParaPost^{(R)}$ Fiber White) and different types of resin cores(ParaCore, $Z100^{TM}$, $Rebilda^{(R)}$ and $Admira^{(R)}$) were prepared and loaded to faiure in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with resin and those of metal cast and core. With the data, Wilcoxon rank sum test was used to validate the significance between the test groups, and Tukey' s studentized range test was used to check if there is any significant statistical difference between each test group. Every analysis was approved with 95% reliance. Results. On measuring the maximum fracture load of teeth specimens, there was a significant difference between the maximum fracture loads of the tooth specimens. ParaCore showed the highest mean maximum fracture load followed by $Z100^{TM}$. And, the distribution of fracture mode of tooth specimens showed generally Type D, the three parted fracture of the core around the post was mostly seen(62.5%), and specifically, ParaCore showed 90% and $Z100^{TM}$ showed 100% Type D fracture. Conclusion. Referring to the values of maximum fracture load and mean compressive fracture load, ParaCore and $Z100^{TM}$ had high values and are recommended as tooth colored resin core material for glass fiber post. CLINICAL IMPLICATIONS. This study was carried out intending to be of aid in selecting the appropriate resin core for the glass fiber post. The dual cure type composite resin ParaCore and light cure type composite resin $Z100^{TM}$ have good properties and are recommended as tooth colored resin core material for glass fiber post.

• 대한치과보철학회지
• /
• 제42권3호
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• 보건교육건강증진학회지
• /
• 제3권1호
• /
• pp.29-42
• /
• 1985

The purpose of this study was to evaluate the educatconal function of the health related articles. The health articles of the four major daily newspapers from Jan. 1st, 1980 to Dec. 31th, 1984 were used and examined for the study. Editorials were excluded. The major results were summarized as follows: 1. The total number of the health articles subjected to the study in the four major daily newspapers was 4,431. On the whole, the health articles were appeared most frequently in 1981. As for monthly distribution, the health articles were appeared most frequently on June.(9.3%). As for weekly distribution, the health articles were appeared most frequently on wednesday and saturday(50.8%). As for the subjects of content; the health articles related to the health & disease management were appeared most frequently(52.8%), but the health articles on industrial health were showed least frequently(0.6%). 2. Reviewing the chronological trend of the health articles, the frequency of appearance of the public health administration was tended to increase year by year, whereas that of enviornmental health, industrial health and population decrease relatively. As for appealing method, it was observed that the articles providing health information were steadily increasing. As for the motives of writing the health articles, there was a tendency that seasonal motive, symphosium & seminar and compaign were increasing, but motive of legislative action and administrative action were gradually decreasing. As for type of the health articles, it was observed that interpretation and research result were steadily increasing. As for the writer of the health articles, there was a tendency that writing by reporter was increasing, whereas writing by experts was decreasing. As for tone of head, the health articles written by identification statement was tended to increase. As for the appearance of photograph & cut, it was observed that the health articles excluding photograph & cut were increasing. 3. When contents were analyzed by subjects, for the purpose of providing information was used most frequently as appealing method for all subjects. As for the motive of writing, "from the interest of writers" was most frequent. As for the type of articles, interpretation type was most prevalent for the public health administration, enviornmental health, food hygrene & nutrition, population and health behavior, while contribution by experts was most frequent for the health & disease management. As for the size of articles, all subjects except the population were appeared most frequently on the column. size between 100㎠ and 199㎠.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.561-568
• /
• 2008

STATEMENT OF PROBLEM: Currently, many implant systems are developed and divided into two types according to their joint connection: external or internal connection. Regardless of the connection type, screw loosening is the biggest problem in implant-supported restoration. PURPOSE: The purpose of this study is to assess the difference in stability of abutment screws between the external and internal hexagonal connection types under cyclic loading. MATERIAL AND METHODS: Each of the 15 samples of external implants and internal abutments were tightened to 30 N/cm with a digital torque gauge, and cemented with a hemispherical metal cap. Each unit was then mounted in a $30^{\circ}$ inclined jig. Then each group was divided into 2 sub-groups based on different periods of cyclic loading with the loading machine (30 N/ cm - 300 N/cm,14 Hz: first group $1{\times}10^6$, $5{\times}10^6$ cyclic loading; second group $3{\times}10^6$, $3{\times}10^6$ for a total cyclic loading of $6{\times}10^6$) The removal torque value of the screw before and after cyclic loading was checked. SPSS statistical software for Windows was used for statistical analysis. Group means were calculated and compared by ANOVA, independent t-test, and paired t-test with ${\alpha}$=0.05. RESULTS: In the external hexagonal connection, the difference between the removal torque value of the abutment screw before loading, the value after $1{\tims}10^6$ cyclic loading, and the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was not significant. The difference between the removal torque value after $3{\times}10^6$ cyclic loading and after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. In the internal hexagonal connection, the difference between the removal torque value before loading and the value after $1{\times}10^6$ cyclic loading was not significant, but the value after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading was reduced and the difference was significant (P < .05). In addition, in the internal hexagonal connection, the difference between the removal torque value after $3{\times}10^6$ cyclic loading and the value after $3{\times}10^6$, and additional $3{\times}10^6$ cyclic loading was not significant. CONCLUSION: The external hexagonal connection was more stable than the internal hexagonal connection after $1{\times}10^6$, and additional $5{\times}10^6$ cyclic loading (t = 10.834, P < .001). There was no significant difference between the two systems after $3{\times}10^6$, and additional $3{\times}10^6$ cycles.

• 벤처창업연구
• /
• 제7권2호
• /
• pp.35-44
• /
• 2012

본 논문은 경영환경이 어려워지고 있는 우리나라 대학부속 한방병원의 수익변화를 재무제표 분석을 통해 살펴봄으로써 한방병원 경영자 및 관계자들에게 의사결정에 필요한 정보를 제공하고자 한다. 2008년과 2010년을 비교한 결과, 조사대상 한방병원의 총자산 감소, 부채증가 그리고 총의료수익 감소와 지속적인 병원적자 등을 알 수 있었으며, 자기자본비율이 높고 차입금의존도가 낮아 전체적으로 경영상태가 양호한 것으로 나타나지만 일부 병원은 심각한 경영난을 겪었으며 이를 일시적으로 극복하기 위하여 단기차입금에 의존하고 있음이 파악되었다. 총자본수익률과 고유목적사업적립금 및 전출금 등이 고려된 총자본의료이익률은 시중금리 수준이었으나 병원간 편차가 심하며 3년 연속 (-)인 병원이 6개, 매출액의료이익률이 (-)인 병원도 10개로 나타나 수익성에 문제가 있음을 알 수 있었다. 한편 대학부속 한방병원 중 총자본과 자기자본이 감소한 병원이 늘어났고 병원 간에도 큰 차이가 있었다. 병원의 자기자본이 감소한 것은 한방병원의 성장이 크게 위축되고 있음을 의미한다. 총자본회전수는 우리나라 한방병원과 3차 의료기관 보다도 낮아 대학부속 한방병원의 활동성이 떨어짐을 보였다. 자기자본회전수는 총자본회전수보다 높았고, 타인자본 비율은 높지 않았으나 병원 간 편차가 컸다.