• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.293-295
• /
• 1993

Most control system design problems involve finding state feedback gain for good response by the pole or characteristic polynomial assignment. In this paper, the characteristic polynomial assignment using PID controller for discrete 2-dimensional system descrived by the Fornasini-Marchesini's 2nd model (F-MM II) is considered. This method it not only available to F-MM II but also to Rosser's model.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1591-1592
• /
• 2007

본 논문에서는 상태궤환을 이용한 철도차량의 능동조향을 위한 제어기법에 대해 다루었다. 능동조향은 곡선부 주행시 발생되는 승차감 저하 및 차륜/레일의 마모, 소음을 줄이고 고속주행을 위한 조향성능 및 주행안정성을 확보하기 위한 기술이다. 논문에서 사용된 제어 방법은 반대차(Half Bogie) 차량모델을 기초로 측정된 휠-레일의 횡변위(Lateral Displacement) 와 요각(Yaw Ang;e)정보를 토대로 휠에 요모멘트를 제어하였으며 시뮬레이션을 통해 제안한 방법에 대한 성능을 검증하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1429-1433
• /
• 2008

In this paper, we consider the design method of robust guaranteed cost controller for discrete-time singular systems with norm-bounded time-varying parameter uncertainty. In order to get the optimum(minimum) value of guaranteed cost, an optimization problem is given by linear matrix inequality (LMI) approach. The sufficient condition for the existence of controller and the upper bound of guaranteed cost function are proposed in terms of strict LMIs without decompositions of system matrices. Numerical examples are provided to show the validity of the presented method.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.514-515
• /
• 2014

3상 4선식 인버터에서 불평형 부하는 중성선 전류를 증가시키고, 이는 직류링크 전압 불 평형을 야기한다. 이러한 이유로, neutral leg을 추가하여 불평형 부하에서 중성선전류와 직류링크전압 불평형을 제어방법이 제안되었다. 본 논문은 상태궤환제어를 이용하여 중성선전류와 직류링크전압 불평형을 제어하는 neutral leg 제어기설계 방법을 제안한다. 제안한설계 방법은 neutral leg의 파라미터 변동에도 우수한 특성을 가진다. 시뮬레이션을 통하여 본 논문이 제안한 제어방법의 타당성과 실효성을 증명한다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1668-1669
• /
• 2007

In this paper, we propose nonlinear congestion controller for active queue management of differentiated-services networks. Two important issues in differentiated-services architecture are bandwidth guarantee and fair sharing of unsubscribed bandwidth among TCP flows with and without bandwidth reservation. The nonlinear congestion controller was composed fuzzy logic controller and state feedback controller. The nonlinear congestion controller methodology has been applied to a TCP network. We use NS-2 simulation to demonstrate that the proposed control methodology achieves the desired behavior of the network, and possesses important attributes.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1682-1683
• /
• 2007

본 논문은 시변 파라미터를 갖는 직류 모터의 적응 제어를 위한 온라인 상태궤환 제어시스템을 구성한다. 모터의 전기자 저항은 공칭값에 대하여 가우시안 랜덤변수로 가정하고 온라인 최소자승 추정법을 이용하여 실시간으로 추정한다. 모터의 부하 토크 또한 시변 특성을 가지며 이런 시스템 환경의 변화에 대해서도 설정치를 잘 추종하는 특성을 갖도록 한다. 컴퓨터 시뮬레이션을 통해 제어기법의 타당성을 검증하며 기존의 상태궤환 제어기법과 비교분석하여 성능의 우수성을 입증한다.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.1
• /
• pp.1-10
• /
• 2013

An integrated orbit and attitude control algorithm for satellite formation flying was developed, and an integrated orbit and attitude software-in-the-loop (SIL) simulator was also developed to test and verify the integrated control algorithm. The integrated algorithm includes state-dependent Riccati equation (SDRE) control algorithm and PD feedback control algorithm as orbit and attitude controller respectively and configures the two algorithms with an integrating effect. The integrated SIL simulator largely comprises an orbit SIL simulator for orbit determination and control, and attitude SIL simulator for attitude determination and control. The two SIL simulators were designed considering the performance and characteristics of related hardware-in-the-loop (HIL) simulators and were combined into the integrated SIL simulator. To verify the developed integrated SIL simulator with the integrated control algorithm, an orbit simulation and integrated orbit and attitude simulation were performed for a formation reconfiguration scenario using the orbit SIL simulator and the integrated SIL simulator, respectively. Then, the two simulation results were compared and analyzed with each other. As a result, the user satellite in both simulations achieved successful formation reconfiguration, and the results of the integrated simulation were closer to those of actual satellite than the orbit simulation. The integrated orbit and attitude control algorithm verified in this study enables us to perform more realistic orbit control for satellite formation flying. In addition, the integrated orbit and attitude SIL simulator is able to provide the environment of easy test and verification not only for the existing diverse orbit or attitude control algorithms but also for integrated orbit and attitude control algorithms.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.113-121
• /
• 2005

In this paper, a constant output power supply system for ozonizer is proposed to remove the noise of ozonizer and control the output of ozonizer using feedback control. The proposed system is based on the rouble control loop such as the outer voltage control loop and inner current control loop. In the proposed system overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the experimental results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.6
• /
• pp.65-72
• /
• 2001

This paper deals with a novel full digital control of the single-phase PWM(Pulse Width Modulation) inviter for UPS(Uninterruptible Power Supp1y). The voltage and current of output filter capacitor as a state variable are the feedback control input. In the proposed scheme a double deadbeat control consisting of minor current control loop and major voltage control loop have been developed In addition, a second order deadbeat currents control which should be exactly equal to its reference in two sampling time without error and overshoot is proposed to remove the influence of the calculation time delay. The load current prediction is achieved to compensate the load disturbance. The simulation and experimental result shows that the proposed system offers an output voltage with THD(Total Harmonic Distortion) less than 5% at a full nonlinear load.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.1
• /
• pp.92-101
• /
• 2010

Recently, the magnetic bearings which have many advantages such as no noise, less mechanical friction are widely applied to the suspension of rotors on the rotary machineries. However, the magnetic bearing system is inherently unstable, nonlinear and MIMO(multi-input-multi-output) system as well. In this paper, we design a state feedback controller using linear matrix inequality(LMI) to the multi-objective synthesis, for the magnetic bearing system with integral type servo system. The design objectives include $H_{\infty}$ performance, asymptotic disturbance rejection, and time-domain constraints on the closed-loop pole location. The results of computer simulation show the validity of the designed controller.