• Steel and Composite Structures
• /
• v.42 no.4
• /
• pp.501-511
• /
• 2022

Earthquake Resistant Design Philosophy seeks (a) no damage, (b) no significant structural damage, and (c) significant structural damage but no collapse of normal buildings, under minor, moderate and severe levels of earthquake shaking, respectively. A procedure is proposed for seismic design of low-rise reinforced concrete special moment frame buildings, which is consistent with this philosophy; buildings are designed to be ductile through appropriate sizing and reinforcement detailing, such that they resist severe level of earthquake shaking without collapse. Nonlinear analyses of study buildings are used to determine quantitatively (a) ranges of design parameters required to assure the required deformability in normal buildings to resist the severe level of earthquake shaking, (b) four specific limit states that represent the start of different structural damage states, and (c) levels of minor and moderate earthquake shakings stated in the philosophy along with an extreme level of earthquake shaking associated with the structural damage state of no collapse. The four limits of structural damage states and the three levels of earthquake shaking identified are shown to be consistent with the performance-based design guidelines available in literature. Finally, nonlinear analyses results are used to confirm the efficacy of the proposed procedure.

• Journal of Korea Trade
• /
• v.23 no.7
• /
• pp.128-146
• /
• 2019

Purpose - The purpose of this paper is to investigate the relationship between internal control, economic policy uncertainty, and performance of cross-border merger and acquisition (M&A) based on the panel data of Chinese listed firms. The authors expected that internal control has a positive moderating effect on the performance of cross-border M&A and that it mainly occurs during periods when economic policies are relatively stable. In addition, the authors tried to find out the mechanism of internal control affecting cross-border M&A and the corporate performance. Design/methodology - The authors tested the hypotheses by a multivariate regression model based on the panel data of Chinese listed firms from 2009 to 2017. The dependent variable is the change value of business performance (DROA_1,2,3) and the explanatory variables are cross-border M&A (MA), China's uncertainty of economic policy (EPU), and internal control level (IC) respectively. Findings - The authors find that internal control has a positive moderating effect on the relationship between cross-border M&A and corporate performance. Further, the authors find that the moderating effect is more significant in state-owned enterprises and that it mainly occurs during periods when economic policies are relatively stable. Originality/value - This paper is the leading study that tries to analyze empirically the relationship between internal control, economic policy uncertainty, and performance of cross-border M&A. It provides a new avenue through which internal control might reasonably mitigate the risks of cross-border M&A and correspondingly improve the performance of cross-border M&A. It also confirms the moderating effect of internal control on the performance of cross-border M&A under the uncertainty of economic policy.

• Physical Therapy Korea
• /
• v.29 no.4
• /
• pp.255-261
• /
• 2022

Background: For the elderly, masticatory function is one of the most important oral functions and the masticatory ability is related to the wearing of dentures. Many older people wear dentures for their masticatory function, but a significant number of older people who use dentures have found that they feel uncomfortable when performing their daily activities, such as performing masticating functions or talking. Objects: The purpose of this study is to investigate how the forward head posture (FHP), respiratory function and thickness of masseter (MS), and sternocleidomastoid (SCM) are affected by the presence or absence of dentures in the elderly, and what kind of correlation there is between these variables. Methods: The study was conducted on 11 patients in the normal group and 13 in the denture group. The participant's cognitive ability was evaluated using Mini-Mental State Examination Korean (MMSE-K), and the FHP was evaluated by measuring the craniovertebral angle (CVA). The thickness of the MS and SCM muscles were measured using ultrasound, and respiration was measured with a spirometry. As for the statistical method, the correlation of each variable was investigated using Spearman's correlation coefficient. Results: In the normal group, there was a significant correlation between forced vital capacity (FVC) and forced expiratory volume in 1 second (FEV1) (p < 0.001), and in the denture group, FVC and FEV1 (p < 0.001), maximal inspiratory pressure (MIP) and maximal expiratory pressure (MEP) (p < 0.001), CVA and Lt. MS (p = 0.012). Conclusion: CVA and Lt. MS of the denture group have a high negative correlation, it is related that the thickness of MS may be thick when the elderly wearing dentures are FHP.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.36-43
• /
• 2022

Generally, in construction sites, the pipe support installation workers often use support pins of 9~10 mm which are much smaller than the safety standard sizes for work convenience. Although the safety certification standard thickness of the support pins is 11 mm, and the supervisors are often indifferent to this. Hence, products with far lower performance than the pipe support safety certification value of 40,000 N, which is applied in the supporting post-structural review, are used. Accordingly, this acts as a factor causing collapse accidents in the process of pouring concrete at the construction site. Therefore, this study performed compression experiments on new and reused pipe supports to determine how the thickness of the support pins affects the structural compression performance of the pipe support by considering the thickness of the support pins as a critical variable among various factors affecting the pipe support performance. In the course of the study, the compression test of the pipe support (V2, V4) for the new products showed that only 14 (58.3%) of the total 24 samples satisfied the safety certification standard value of 40,000 N, which indicates that more thorough quality control is required in the manufacturing process. Additionally, comparing the thickness of the support pins and their fracture shape shows that the pipes with support length of 4.0 m or longer are much more affected by the buckling of the entire length than the thickness of the support pins. Of the several factors affecting the performance of reused pipe supports, it was found that, similar to the new products, the use of support pins, with thickness of 12 mm rather than 11 mm, can satisfy the safety certification value more appropriately. Therefore, regardless of the state of usage, it could be concluded that it is necessary to use 12 mm products, whose thickness is larger than that of the safety certification standard value of 11 mm, to improve the performance of the pipe supports.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.182-192
• /
• 2022

This study analyzed the effects of the all-in-one automatic fire shutter (hereinafter referred to as "all-in-one shutter") installed along the fire compartment in a five-story high school building on the evacuation time by using the Pathfinder simulation program. When the all-in-one shutter was added as a new variable, the evacuation time was delayed, indicating insufficient evacuation safety. The evacuation time exceeded the appropriate standard when the evacuation exit was designated to the students in the present state of being placed on the 2nd, 3rd, and 4th floors and the all-in-one shutter was activated. When students were placed on the 1st, 2nd and 3rd floors under the same conditions, the evacuation time was also greatly exceeded. However, when the width of the entrance was set to 130cm, the evacuation time was almost the same as when the all-in-one shutter was not installed. In high-rise school buildings, the bottleneck caused by all-in-one shutters is becoming a major factor in evacuation barriers. To ensure the evacuation safety of school buildings, it has been judged that evacuation education and training to predict the evacuation time required through the all-in-one shutter entrance and induce an evacuation procedure suitable for the standard evacuation time should be carried out in parallel. The implications of this study and suggestions for effective fire compartments and follow-up studies were discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.86-94
• /
• 2023

In this study, a supplementary detail capable of restraining out-of-plane deformation was proposed for steel slit dampers, and a constant amplitude cyclic loading test was performed with the application of the proposed detail and the shape ratio of the damper as variables. Repeated hysteresis and cumulative plastic deformation according to the test results were analyzed. Repeated hysteresis of the slit damper with the proposed detail showed a stable spindle-shaped hysteresis within the set variable range, and no out-of-plane deformation of the damper was observed until ultimate state. It was confirmed that the restraining panel effect through the application of the proposed details is effective in terms of both the strength and deformation capacity of the damper. In addition, experimental parameters for the fatigue curve evaluation of slit dampers were derived in this study. Based on the results, it is judged that quantitative comparison of structural performance with various types of seismic devices will be possible in the future.

• Structural Engineering and Mechanics
• /
• v.85 no.1
• /
• pp.105-118
• /
• 2023

The present work is an attempt to develop a simple and accurate finite element formulation for the assessment of thermal shock/thermally induced vibrations in pretwisted and tapered functionally graded material thin (FGM) blades obtained from Voigt and local representative volume elements (LRVE) homogenization models, based on neutral surface approach. The neutral surface of the FGM blade does not coincide with its mid-surface. A finite element model (FEM) is developed using first-order shear deformation theory (FSDT) and the FGM turbine blade is modelled according to the shallow shell theory. The top and the bottom layers of the FGM blade are made of pure ceramic and pure metal, respectively and temperature-dependent material properties are functionally graded in the thickness direction, the position of the neutral surface also depends on the temperature. The material properties are estimated according to two different homogenization models viz., Voigt or LRVE. The top layer of the FGM blade is subjected to high temperature and the bottom surface is either thermally insulated or kept at room temperature. The solution of the nonlinear profile of the temperature in the thickness direction is obtained from the Fourier law of heat conduction in the unsteady state. The results obtained from the present FEM are compared with the benchmark examples. Next, the effect of angle of twist, intensity of thermal shock, variable chord and span and volume fraction index on the transient response due to thermal shock obtained from the two homogenization models viz., Voigt and LRVE scheme is investigated. It is shown that there can be a significant difference in the transient response calculated by the two homogenization models for a particular set of material and geometric parameters.

• Herbal Formula Science
• /
• v.31 no.3
• /
• pp.171-182
• /
• 2023

Objectives : Saposhnikoviae Radix (SR) and Glehniae Radix (GR) have been frequently used in traditional medicine to treat diseases related to 'wind' syndrome, but there have been cases where it has been mixed in a state where the plant of origin is not clear. In this study, to select materials for conducting preclinical cerebral infarction research, the network pharmacology analysis method was used to select suitable medicinal materials for the study. Methods : In this study, a Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform (TCMSP) based network pharmacology analysis method was used, and oral bioavailability (OB), drug likeness (DL), Caco-2 and BBB permeability were utilized to select compounds with potential activity. For the values of each variable used in this study, OB ≥ 20%, DL ≥ 0.18, Caco-2 ≥ 0, and BBB ≥ -0.3 were applied, then networks of bioactive compounds, target proteins, and target diseases was constructed. STRING database was used to construct a protein-protein interaction network. Results : It was confirmed that SR rather than GR has various target proteins and target diseases based on network pharmacological analysis using TCMSP database. And it was analyzed that the bioactive compounds only in SR act more on neurovascular diseases, and both drugs are expected to be effectively used for cardiovascular diseases. Conclusions : In our future study, SR will be used in an ischemic stroke mouse model, and the mechanism of action will be explored focusing on apoptosis and cell proliferation.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.4
• /
• pp.135-142
• /
• 2023

Recently, many companies are using public cloud services or building their own data center because digital transformation is expanding. The software-defined storage is a key solution for storing data on the cloud platform and its use is expanding worldwide. Software-defined storage has the advantage of being able to virtualize and use all storage resources as a single storage device and supporting flexible scale-out. On the other hand, since the size of an object is variable, an imbalance occurs in the use of the disk and may cause a failure. In this study, a method of redistributing objects by optimizing disk weights based on storage state information was proposed to solve the imbalance problem of disk use, and the experimental results were presented. As a result of the experiment, it was confirmed that the maximum utilization rate of the disk decreased by 10% from 89% to 79%. Failures can be prevented, and more data can be stored by optimizing the use of disk.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.584-588
• /
• 2021

The impedance of the speaker is likely to be recognized as a fixed value. However, speaker impedance continues to vary with frequency variation, especially larger in resonant frequency region. The sound pressure level of loudspeakers is determined by the current flowing throughout the coil that consists loudspeakers. If loudspeakers are driven by voltage, sound pressure level of the loudspeaker is distorted by the variation of loudspeaker impedance. Current-drive of loudspeakers can solve this problem, but distortion of sound pressure level occurs in low frequencies due to resonance. The distortion can degrade the sound quality of the sound system. So to solve this problem, In this paper, we propose a resonance compensation circuit using DSP. we simulates audio systems using an equivalent model of loudspeakers to verify distortion of sound pressure level due to impedance variation and propose a circuit to compensate it. The proposed circuit is configured using a state variable filter and it can adjust the center frequency and output, so it will be used various sound systems.