• Journal of Korea Water Resources Association
• /
• 제31권4호
• /
• pp.439-448
• /
• 1998

There are many methods to calculate steady-state flowrate in a large water distribution system. Linear method which analyzes continuity equations and energy equations simultaneously is most widely used. Though it is theoretically simple, when it is applied to a practical water distribution system, it produces a very sparse coefficient matrix and most of its diagonal elements are to be zero. This sparsity characteristic of coefficient matrix makes it difficult to analyze pipe flow using the linear method. In this study, a graph theory is introduced to water distribution system analysis in order to prevent from producing ill-conditioned coefficient matrix and the technique is developed to produce positive-definite matrix. To test applicability of developed method, this method is applied to 22 pipes and 142 pipes system located nearby Taegu city. The results obtained from these applications show that the method can calculate flowrate effectively without failure in converage. Thus it is expected that the method can analyze steady state flowrate and pressure in pipe network systems efficiently. Keywords : pipe flow analysis, graph theory, linear method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.440-441
• /
• 2004

A volumetric three-dimensional (3D) display system was presented, which utilizes a rotating two-dimensional (2D) display panel of light emitting diodes (LEDs) to generate more than 10 million volume pixels (voxels) within a cylindrical volume of 165 mm in height and 292 mm in diameter. Due to persistence of vision, momentarily addressed voxel information is perceived and fused into a 3D image. Important cues for depth perception, such as binocular parallax, accommodation, convergence and motion parallax are satisfied automatically and naturally, thus it is suitable for individual or group viewing, without the need for any special visual aids.

• Journal of Institute of Control, Robotics and Systems
• /
• 제2권1호
• /
• pp.1-4
• /
• 1996

This paper presents a state feedback $H^{\infty}$ controller design method for linear systems with delayed states and inputs. We derive a sufficient condition that the closed-loop system is asymptotically stable for all time-delays and that the $H^{\infty}$-norm of the closed-loop transfer function is less than or equal to some prescribed level $\gamma$. And we propose a sufficient condition for the existence of a state feedback $H^{\infty}$ controller using a form of linear matrix inequality(LMI). Furthermore, we show that the state feedback $H^{\infty}$ controllers can be obtained from solutions satisfying LMI.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.86-88
• /
• 2008

Organosiloxane based spin on planarizing dielectrics (PTS-E and PTS-R) were developed for application in flat panel displays as a replacement to conformal chemical vapor deposited SiNx. Here we demonstrate the successful use of siloxane-based material as a passivation layer for active matrix $\alpha$-Si thin film transistors (TFT) on both rigid and flexible substrates.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.161-182
• /
• 2016

A state space differential reproducing kernel (DRK) method is developed for the three-dimensional (3D) analysis of functionally graded material (FGM) axisymmetric circular plates with simply-supported and clamped edges. The strong formulation of this 3D elasticity axisymmetric problem is derived on the basis of the Reissner mixed variational theorem (RMVT), which consists of the Euler-Lagrange equations of this problem and its associated boundary conditions. The primary field variables are naturally independent of the circumferential coordinate, then interpolated in the radial coordinate using the early proposed DRK interpolation functions, and finally the state space equations of this problem are obtained, which represent a system of ordinary differential equations in the thickness coordinate. The state space DRK solutions can then be obtained by means of the transfer matrix method. The accuracy and convergence of this method are examined by comparing their solutions with the accurate ones available in the literature.

• 전기의세계
• /
• 제23권2호
• /
• pp.46-54
• /
• 1974

The purposes of this paper are to deal with the design of m-input, m-output linear systems by the state variable feedback, and to extend the design capability of the state variable feedback design. The design requirements are decoupling and the exact realigation of desired transfer functions. Some methods are proposed to insert series compensators in the fixed plant in the cases when series compensators are needed to meet the input-output transfer matrix specification. The method for adding series compensators to the input channels of the fixed plant is shown by examples to lead both to the loss of the ability to decouple the augmented plant by the state variable feedback, and to the loss of desired zeroes. A method which avoids these two hazards is developed in which series compensators are put on the output channels of the fixed plant: it is proved that the augmented plant is F-invariant. By treating each subsystem individually, the designer can apply some of the previous developed knowledge of the state variable design of single-input, single-output systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.221-223
• /
• 2005

To make real 3D vision available, we have established a volumetric 3D display system that based on rotating LED matrix. The paper introduced a method to correct the problem that pixels are not symmetrical but circumferential in space, which causes the resolution of the edge area much lower than that of the central area.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.624-629
• /
• 2008

This paper presents a scheme for designing a state observer for container cranes. If the system is completely observable with a given set of outputs, then it is possible to determine the states that are not directly measured. We consider the reduced-order states observer with only trolley position detection and with trolley position and container angle detection. The gain matrix of the each state observer is adjusted using a RCGAs. A set of simulation works is carried out to demonstrate the effectiveness of the proposed scheme.

• Journal of the Semiconductor & Display Technology
• /
• 제21권3호
• /
• pp.114-118
• /
• 2022

The stabilized all-solid-state battery structure indicate a fundamental alternative to the development of next-generation energy storage devices. Existing liquid electrolyte structures severely limit battery stability, creating safety concerns due to the growth of Li dendrites during rapid charge/discharge cycles. In this study, a low-dimensional graphene quantum dot layer structure was applied to demonstrate stable operating characteristics based on Li+ ion conductivity and excellent electrochemical performance. Transmission electron microscopy analysis was performed to elucidate the microstructure at the interface. The low-dimensional structure of GQD-based solid electrolytes has provided an important strategy for stable scalable solid-state lithium battery applications at room temperature. This study indicates that the low-dimensional carbon structure of Li-GQDs can be an effective approach for the stabilization of solid-state Li matrix architectures.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1049-1053
• /
• 1999

It is important to measuring and monitoring about state vectors of power system for precise operation control. All state vectors cannot be measured because it is economically disadvantageous, so that some state vectors are determined using state estimator. Determination of observability is a important precondition of power system state estimation because state estimation can be performed when given power system is observable. Recently as time-synchronization technique progress, using the PMU(Phasor Measurement Unit), state vector can be measured directly so that voltage phasor and current phasor measurements can be used for power system estimation. In this paper, observability algorithm is proposed to determinate the observability with real/reactive injection power measurements and real/reactive lineflow power measurements of existing measurement system and with phasor measurements of PMU. The jacobian matrix is newly composed for state estimation with measurements of added PMU, and state estimation is performed with least square estimatior. Comparison between state estimation result of existing measurement system and that of measurement system added PMU is presented.