• Korean Journal of Agricultural Science
• /
• v.49 no.4
• /
• pp.759-769
• /
• 2022

As the variability of recent rainfall is increasing, it is becoming important to recognize the possibility of changes in the current reservoir state in advance and to inspect the stability based on accurate evaluation standards. However, the evaluation standards for the state change factors of reservoirs are still not suitable for agricultural reservoirs and thus much improvement is needed. Therefore, in this study, the evaluation criteria for state change factors specialized for small reservoirs were categorized and standards were prepared by considering factors that may cause state changes on the dam crest, upstream slope, and downstream slope of the embankment. The categorized results were configured based on the number of mentions of the precision safety inspection report on major defects in 102 reservoirs and the defect factors found in field investigations. The findings of the study indicated that the current state change standards require many revisions for excessive or unnecessary state change factors in the reservoir. Specifically, the deletion of measurement gauges not applicable to the reservoir, the addition of defects found in the reservoir, and the scope of use of the term were proposed. The results of this study can contribute to efficient system operation and management by improving the deficiencies in the system and introducing a new state change factor.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.126-130
• /
• 2003

The term stress is currently used to cover a wide variety of phenomena, ranging from physical to social and cultural factors. The term has defined psychological stress as an imbalance between perceived or subjective demand and perceived response capability. The behavior science model has provided the accident proneness through the life change unit factors considering human behavior, life style, ideas, culture, and psychological state. Therefore, this paper presents the Korean life change unit model through statistical testing with the proposed life change unit factors on the unmarried workers living in the middle area. The proposed model can be simply used in real fields in order to minimize the industrial accidents.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.613-620
• /
• 1992

The solvent-dependent photophysical properties of 2-biphenylcarboxylic acid (2BPCA) and 4-biphenylcarboxylic acid(4BPCA), which have a pre-twisted conformation in the ground state, have been investigated. The fluorescence spectra of 4BPCA show vibrational structure with a non-mirror image to the absorption spectra in nonpolar solvent while those of 2BPCA show no structure even in nonpolar solvents. As the solvent polarity increases, the fluorescence spectra become diffuse and broad with a strong red shift resulting in the large Stokes shift. The large fluorescence Stokes shift of BPCA's in polar solvent is also partially due to an intramolecular charge transfer (ICT) interaction in the excited state, as demonstrated by the large dipole moment in the excited state (7.6-10.6 D). The fluorescence decay behaviors of BPCA's (decay-times and their pre-exponential factors) also depend on solvent polarity in agreement with the solvent-dependent properties of the steady-state fluorecence. The data have been discussed in terms of change in the excited-state potential energy surface with respect to change of the dihedral angle of biphenyl moiety.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.52-55
• /
• 2024

In this paper, a state change study was conducted through Frequency Domain Reflectometry (FDR) technology for the process chamber of plasma equipment for semiconductor manufacturing. In the experiment, by direct connecting the network analyzer to the RF matcher input of the 300 mm plasma enhanced chemical vapor deposition (PECVD) chamber, S11 was measured in a situation where plasma was not applied, and the frequency domain reacting to the chamber state change was searched. Response factors to changes in the status, such as temperature, spacing of the heating chuck, internal pressure difference, and process gas supply state were confirmed. Through this, the frequency domain in which a change in the reflection value was detected through repeated experiments. The reliability of the measured micro-displacement was verified through reproducibility experiments.

• International Journal of Costume and Fashion
• /
• v.15 no.1
• /
• pp.1-18
• /
• 2015

The ethnic dress of Germany's Black Forest, called Tracht, dates back to the 16th century. Although most people living within the Black Forest do not presently wear Trachten, some persistence in this tradition exists. This study explored the factors that have supported the persistence of the Trachten tradition, specifically related to the wearing and crafting of Trachten by women, in a contemporary society. A qualitative, ethnographic approach was adopted. Data were collected via observations and interviews in the Black Forest. Thematic analyses revealed that the maintenance of the Trachten tradition was linked to varied factors that revolved around the overarching themes of both persistence and change. Interpretations were supported by theory proposing that ethnic dress is not static, but rather, changes across space and time in ways that enable its persistence. The persistence of the Trachten tradition was linked to formalized practice, meaningful identities, and desires to preserve and promote local culture. Additionally, the persistence of the Trachten tradition was fostered by change in the tradition, including the conceptualization of Trachten as a "lived practice" and the negotiation of Trachten authenticity.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.351-355
• /
• 2019

Load resistance factors for the limit state design of vertical caisson breakwaters are presented. Reliability analysis of 16 breakwaters in nationwide ports was conducted to calculate the partial safety factors and they were converted into load and resistance factors. The final load resistance factor was calibrated by applying the optimization technique to the individually calculated load resistance factors. Finally, the breakwater was redesigned using the optimal load resistance factor and verified whether the target level was met. The load resistance factor according to the change of the target reliability level is presented to facilitate the limit state design of breakwater.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.385-388
• /
• 2004

Many environmental destruction factors are accompanied in the mining development work and the secondary environmental disaster and the induction factors are inhered. We aquired digital data using aerial photogrammetry to analyze the terrain current situation according to the development situation of the mining restoration plan. We made the object area to 3D model and conducted terrian change monitoring. Then, we presented the decision-making information to improve rational management according to the original state plan.

• Journal of Navigation and Port Research
• /
• v.34 no.6
• /
• pp.471-477
• /
• 2010

In recently, IMO consider including an marine casualty factor when Port State Control Inspection evaluate.. This paper proposes an evaluation to Target Factor Values of Port State Control Inspections(PSCITFV) using absolute measurement. To this solve, therefore, this paper used the absolute measurement which is informed compensate the defect and the more rational and objective methode, checked the effectiveness to compare an result with absolute measurement and PSCITFV of Tokyo MOU using Wilcoxson test. Finally, rate change of PSC was investigated by an experiment which changed the values of evaluation factors. As a result, it was evaluation factors of high rate change that was detention, ship's age, casualty factors. Therefore, this factors have to a priority management to do for prevent of PSC.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1308-1311
• /
• 2004

It is very important that get polishing characteristic that to be stable that accomplish planarization of high efficiency in chemical mechanical polishing, and there is repeatability Groove of pad causes much effects in flow of slurry among various factors that influence in polishing characteristic, is expected to cause change of lubrication state and polishing characteristic in contact between wafer and pad. Therefore, divided factors of pad groove by groove pattern, groove profile, groove dimensions. This research wishes to study effect that dimension of pad groove gets in polishing performance. When changed dimension (width, depth, pitch of groove) of groove, measured change of removal rate and friction force. According as groove dimension changes, could confirm that removal rate and friction force change. While result of this experiment studies effect of pad groove in CMP, it is expected to become small help.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.215-222
• /
• 2017

In order to evaluate a stress state of concrete according to the change of tensile force of prestressed beam, improved nonlinear resonant ultrasonic spectroscopy(NRUS) method is proposed. This technique is advantageous to evaluate the stress state in initial state because the method shows much higher sensitivity than existing linear ultrasonic methods. The NRUS technique measure a nonlinearity parameter, which is calculated from the resonant frequency shift of ultrasonic wave related to the medium state, and the result is also closely related to the stress state of concrete. In this study, the nonlinearity parameter was measured with the change of tensile force to verify the close relationship between the two factors, and the effect of repetitive load cycle on the change of nonlinearity parameter was analyzed. In addition, sensitivity comparison with the linear ultrasonic pulse velocity method was performed. Through the experimental results, the possibility of NRUS technique for the evaluation of stress state in prestressed beam was confirmed.