• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1155-1161
• /
• 2014

This paper proposes a start-up voltage generator for reducing the minimum input supply voltage of DC-DC boost converters to 250mV. The proposed start-up voltage generator boosts 250mV input voltage to over 500mV to charge the capacitor for starting the boost converter. After the boost converter operates initially with the supply voltage charged in the capacitor, it uses its boosted output voltage for the supply voltage. Therefore, after the start-up operation, the proposed DC-DC boost converter works as the same as the conventional one. The proposed start-up voltage generator reduces the threshold voltage of the transistors by adjusting the body voltage at a low input voltage. This causes the higher clock frequency and the larger current to a Dickson charge-pump for boosting the input voltage. The proposed start-up voltage generator was implemented with a $0.18{\mu}m$ CMOS process. Its clock frequency and output voltage were 34.5kHz and 522mV at 250mV input voltage, respectively.

• Journal of the Korean Society of Costume
• /
• v.67 no.2
• /
• pp.131-146
• /
• 2017

The aim of this study is to investigate the operating characteristics of fashion start-up companies and the characteristics of their founders. For this purpose, this study surveyed fashion start-up companies via online survey in May 2015, and analyzed the data from one hundred companies. The results are as follows. First, for the characteristics of the founders, female founders constituted 65.0% and male founders 35.0%. At the time of establishment, founders aged 26-35 constituted 77.0%. Founders with less than five years of work experience made up about 80%. 82.1% of the founders participated in domestic and foreign exhibitions/fairs. 41.0% of the founders were awarded fashion contest and competition awards, and 33.3% of the founders were supported by rising designer support projects. Second, for the operating characteristics of the start-up companies, clothing at 78.0% was the most popular entrepreneurial item, and the majority targeted the age 20-30 group. 78.0% of the companies had less than 40 production styles per season, and all the enterprises had less than 5 employees. 59.0% of the companies had export experience. Exports to China, Hong Kong, and Japan accounted for 67.4% of all exports. Major distribution channels were mainly select shops(offline select shops 79.8%, online select shops 62.8%). The main methods of promotion were fashion media articles/interviews, product sponsorship, and SNS. The most preferred distribution channel was becoming a part of online/offline select shops(92.6%). Viral marketing(84.4%), star marketing and costume sponsorship(66.7%) were the most preferred method of promotion. The most preferred way to enter foreign markets was to participate in domestic and foreign exhibitions/fairs/trade shows. This study provides basic data necessary for future founders preparing to launch fashion start-up companies. It also aids fashion start-up companies in developing more advanced business operation strategies.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.4
• /
• pp.100-108
• /
• 1997

A combined buck and boost push-pull quantum series resonant rectifier(PPQSRR) is newly proposed to achieve a power factor correction without start-up inrush current. Based on the developed dynamic modeling of the proposed rectifier, an inrush current elimination control technique is proposed and the usefullness of the proposed rectifier and control method are verified by computer simulation and experimental results. With the proposed control method, a high power factor and wide range of output voltage can be obtained.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1304-1306
• /
• 1996

A regenerative signal amplifying gate driver of self-excited electronic ballast is presented. It can be used for high pressure sodium (HPS) lamp without auxiliary external ignitor. Since the HPS lamp requires very high ignition voltage at start up, the resonant frequency of the circuit must be increased to obtain high voltage oscillations in spite of relatively small resonant current. The presented gate driver amplifies the current of gate drive transformer and raises the gate-source voltage Quickly to turn on the MOSFET switches. Hence, the resonant frequency can be increased more than 100kHz. The HPS lamp used in the simulation and experiment has the rating of 400W input power at 220V input ac voltage source. The experiments show that the resonant frequency is above 150kHz at start up.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.357-363
• /
• 2011

In spite of numerous advantages in railroads such as mass transportation, high reliability, and environmental soundness etc., the value of railroad construction is relatively underestimated compared to road. This is because the current method of evaluation focuses mainly on economic effect. In this study, considering recent research results, the environmental value of railroad construction was assessed by calculating the effect of reduction of emissions and water contamination. With these two benefits, the environmental effect produced by railroads and road construction was calculated and compared to each other using EMME/3. As a result, the senario 4 which considers 'Hot/Cold start' condition and water contamination had highest benefits. Furthermore, the environmental effect produced by railroad is 55~101% higher than road construction. If the suggested method is used in the current appraisal system, the environment-friendly mode like railway would be highly valued, much more than before.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2001

The welding quality by Gas Tungsten Arc Welding shows very high level, but the welding speed is lower than that of gas metal arc welding. Also, the welding quality by automatic GTAW is variable as the arc characteristics is changed by the consumption of electrode tip. The purpose of this study is to investigate the relation between the properties of tungsten electrode tip and the various arc characteristics at high current region. In this study, the high welding current 200A was applied to the repeated arc start test and long term arcing test using the $\phi$3.2 tungsten electrodes with cone angle 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$sharp tip, and 60$^{\circ}$surface polished (S.P.) sharp tip. It was confirmed that the maximum arc pressure by the initial electrode condition was highest in 45$^{\circ}$sharp tip, and the next in 60$^{\circ}$sharp tip, the last was in 30$^{\circ}$sharp tip and 60$^{\circ}$S.P.. But, the maximum arc pressure after the repeated arc start test and long term arcing test was decreased considerably. But, the maximum arc pressure was highest also in 45$^{\circ}$ sharp tip after the tests, the next was in 30$^{\circ}$sharp tip, and the last was in 60$^{\circ}$sharp tip and 60$^{\circ}$S.P.. The arc start characteristics was the most excellent in 60$^{\circ}$S.P., By long term arcing test, the lanthania included in tungsten electrode was extinguished at tip surface preferentially, therefore the arc characteristics of electrode tip got worse.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.6
• /
• pp.96-108
• /
• 2015

his study deals with a power conversion unit of an anti-start air conditioner compressor system for the commercial vehicle. In case of converter, to reduce the switching losses and current stresses of the device, applies LLC resonant topology. Transformer leakage inductance in the full-bridge converter is used for making the resonance with the capacitor of the voltage-doubler. Through this method we can increase power and decrease volume of system. Both circuit analysis and design guideline are described. So in this paper, power conversion unit is designed. 2.5kW anti-start air conditioner compressor system was implemented, and system operation and stability was verified through experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.77-78
• /
• 2006

Post industrial technologies have improved human standard of living, however, a host of negative environmental consequences from the unlimited industrial appetite have posed serious global challenges. Remanufacturing is an industrial manufacturing process that is to restore old products to perform like a new and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. By extending product life cycle, remanufacturing gives us enormous opportunities for sustainable development of our society. This paper introduces current state of the art and future perspective in the field of automotive remanufacturing focusing on alternator and start motor. The results could be used as a basic information for further remanufacturing applications in Korea.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.3 no.2
• /
• pp.21-25
• /
• 2015

Investment process on startup companies faces several difficulties based on the characteristics of this type of companies, such as lack of historical data, current operating losses and absence of comparable companies. In this paper we focus in a new methodology based on ordered weighted averaging (OWA) operators. OWA operators are useful instruments that enable the aggregation of information; in other words, from a data set we are able to obtain a single representative value of that set. The investment methodology presented consists on the application of OWA operators to the targeted startup companies based on the capacity of cash-flow generation and also on the planned scenario of future growth for each company. This paper shows that the methodology proposed can serve as a valuable tool, complementing the qualitative criteria (which, obviously, should not be ignored) for assessing and selecting a start-up investment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.1 no.1
• /
• pp.20-26
• /
• 1996

The common drive method of the single phase induction motor(SPIM) is to install a start capacitor and a centrifugal switch in series with the auxiliary winding. In this paper, the phase angle voltage sequence controller is proposed to eliminate a start capacitor and a centrifugal switch of SPIM. In comparison with the capacitor start system of SPIM, the proposed control system shows that it contributes to saving the starting current about 57% and to improving of the starting efficiency of SPIM. The proposed starting characteristics of the SPIM is obtained with this strategy through simulation and experimental results.