• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1282-1288
• /
• 2011

Recently, the demand regarding reliability and safety of the railroad are increased as built to high-speed railway and Driverless LRT systems. Accordingly, effective management of construction projects is being applied, with the introduction and use of PMIS computerized systems. Due to the construction of railways, from the start of PMIS research planning, design, procurement, to construction and commissioning, various expertise is being carefully gathered, and by integrating it into the unified budget ideas and processes, rational, efficient, organized, and manageable financial plans are developed for the computerized system. However, the current PMIS does not take into account the life-cycle. Therefore, this study is to bring attention to the BIM smart BOM-based configuration management for life-cycle through the consideration for railway construction project management.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2280-2285
• /
• 2011

As the prefecture railroad construction accelerates, unmanned system's reliability and safety is increasing in demand. Accordingly, effective management of construction projects for the PM and SE techniques are being applied, with the introduction and use of PMIS computerized systems. Due to the construction of railways, from the start of PMIS research planning, design, procurement, to construction and commissioning, various expertise is being carefully gathered, and by integrating it into the unified budget ideas and processes, rational, efficient, organized, and manageable financial plans are developed for the computerized system. However, the current PMIS does not take into account the life-cycle. This study is to bring attention to the BIM smart BOM-based configuration management for life-cycle through the consideration for railway construction project management.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.58.1-58.1
• /
• 2015

Gravitational-wave has been predicted by Einstein's general relativity in 1916, but its direct detection has failed to date despite of the persistent efforts in the last fifty years in the ground-based gravitational wave detectors. In the centennial year of the birth of general relativity, 'advanced LIGO', one of the most promising Earth-based gravitational wave detectors, plans to start commissioning for the successful discovery of gravitational waves. In addition, a pathfinder satellite of eLISA project, a space-based GW antenna by European Space Agency (ESA), will be launched in the mid of this year. In this talk, we review the current status of gravitational waves detection experiments and discuss its scientific impacts and the possibility of opening the new age of astronomy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.140-140
• /
• 2009

The polymer electrolyte membrane fuel cell(PEMFC) with the advantages of low-operating temperature, high current density, low cost and volume, fast start-up ability, and suitability for discontinuous operation becomes the most reasonable and attractive power system for transportation vehicle and micro-grid power plant in a household. 200W PEM-type FCs system was integrated by this study, then the electrical characteristics and diagnosis of the fuel cell were analyzed with variations on mass flow rate and stack temperature. The ranges of the variations are $20{\sim}70^{\circ}C$ on stack temperature and 1~8L/min on $H_2$ volume.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.4
• /
• pp.247-261
• /
• 2016

Objective:The aim of this paper is to discuss the nuclear safety culture in Korea. Background: Recently, Korean nuclear field has met a strong anti-nuclear trend after a few happenings, as well as Fukushima accident, which are turned out to be caused by organizational pitfalls and safety culture defects in general. Method: We review the concepts and constructs of safety culture based on the brief history of the nuclear safety culture that IAEA mainly raised after the Chernobyl accident in 1986. Additionally, we give a comparative discussion on the approach to the safety culture with U.S. Results: Finally, we discuss the three technical domains and propose six selected domestic issues related to the nuclear safety culture for coping with the demanding requests on nuclear safety in Korea. Conclusion and Application: We suggest several recommendations and a research direction in the form of a re-start line for the nuclear safety culture in Korea.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.510-517
• /
• 2019

Efficient path planning is essential for unmanned surface vehicle (USV) navigation. The A^* algorithm is an effective algorithm for identifying a safe path with optimal distance cost. In this study, a modified version of the A^* algorithm is applied for planning the path of a USV in a static and dynamic obstacle environment. The current study adopts the A^* approach while maintaining a safe distance between the USV and obstacles. Two important parameters-path length and computational time-are considered at various start times. The results demonstrate that the modified approach is effective for obstacle avoidance by a USV that is compliant with the International Regulations for Preventing Collision at Sea (COLREGs).

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.531-533
• /
• 1996

The most common method of the single phase induction motor(SPIM) is to install a starting condenser and a centrifugal switch in series with the auxiliary winding. Even though this capacitor start method is embodied simply, it is feasible because of motor failure from malfunction of the centrifugal switch and the starting condenser. Moreover, it is hard to improve the performance characteristics of the SPIM. In this paper, the voltage and phase angle sequence, control strategy of the auxiliary winding of the SFIM is employed to eliminate the centrifugal switch and the starting condenser. The proposed control system is superior to a conventional system in the starting performance of SPIM. Finally, the improved starting characteristics of the SPIM is obtained with this strategy through simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1067-1068
• /
• 2011

This paper deals with the method of starting characteristic analysis of a single-phase line-start permanent magnet (LSPM)motor. The starting characteristic such as current, torque and is important in LSPM because of demagnetizing of the permanent magnet. In this paper, the characteristic analysis is performed using finite element method.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.107-109
• /
• 2003

Single phase induction motor is directly used usual source, it can be a source of an appliance such as mechanical fan, refrigerator, washing machine, etc. Especially capacitor-run single phase induction motor is suitable to make more inexpensive and high efficient products because it is more high efficiency, and good to start than other single phase induction motors. Generally, voltage and current of capacitor-run single phase induction motor transfer to the part of positive phase and negative phase based on two motor theory. In this paper, we simulate the torque characteristics to capacitance variation from single phase induction motor's equivalent circuit. Through the test using the real motor, we compare and investigate the maximum torque of run state related with capacitance and the adequacy of the converted model.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.104-106
• /
• 2003

In this paper, we study about the stator winding magnetization method and the magnetizing fixture magnetization method in post-assembly magnetization. Most of small electrical machine use the stator winding magnetization method but it is impossible to magnetize the permanent magnet by the stator winding magnetization method when the capacity of machine increases and the coercive force of magnet increases. And the eddy current disturbs the magnetization seriously in case of LSPM(Line Start Permanent magnet Motor) that have conductor bar in rotor. Hence, the magnetization fixture is required. So, in this paper we study about the post-assembly magnetization method that can use the stator winding magnetization method or must use the magnetization fixture magnetization method.