• Title/Summary/Keyword: starch size

Search Result 309, Processing Time 0.022 seconds

Paticle Size Distribution, Pasting Pattern and Texture of Gel of Acorn, Mungbean, and Buckwheat Starches (도토리, 녹두 및 메밀전분의 입도분포, 호화패턴과 겔특성)

  • Cho, Sung-Ae;Kim, Sung-Kon
    • Korean Journal of Food Science and Technology
    • /
    • v.32 no.6
    • /
    • pp.1291-1297
    • /
    • 2000
  • Particle size distribution, pasting properties by Rapid Visco Analyser, and textural properties of acorn, mungbean and buckwheat starches, which are the basic raw materials for mook, are compared. The major particle size of mungbean starch was $10{\sim}30$ micron, whereas acorn and buckwheat starches were $5{\sim}20$ micron. At the same starch concentration, mungbean starch had the highest peak viscosity, breakdown and setback. Acorn starch showed the lowest peak viscosity and breakdown. The peak viscosity of buckwheat starch was close to that of mungbean, however the trough and final viscosity were comparable to those of acorn starch. At the same peak viscosity, mungbean starch showed the lowest trough and final viscosity and the highest breakdown and setback. Acorn starch was differentiated from buckwheat starch in that the former had the higher value of setback. The textural properties of mungbean starch gel were significantly different from others. The texture of gels from acorn and buckwheat starches revealed that only the hardness and gumminess were different each other. The hardness of starch gels were negatively correlated with trough and final viscosity, and positively correlated with setback.

  • PDF

Influence of Rumen Escape Starch on α-Amylase Activity in Pancreatic Tissue and Small Intestinal Digesta of Lambs

  • Xu, M.;Yao, J.H.;Wang, Y.H.;Wang, F.N.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.12
    • /
    • pp.1749-1754
    • /
    • 2006
  • Two slaughter experiments were conducted to determine the effects of rumen escape starch, by altering dietary starch concentration and corn particle size, on ${\alpha}$-amylase activity in the pancreas and the small intestinal digesta of lambs. In experiment 1, 18 wether lambs (28.5${\pm}$1.6 kg) were fed low, medium or high starch diets for 35 d and slaughtered. Dietary starch concentrations linearly increased rumen escape starch (p<0.05). Pancreatic ${\alpha}$-amylase activity was lower (p<0.05) in lambs fed the low starch diet. When expressed per gram of digesta, ${\alpha}$-amylase activity was lower in lambs fed the low starch diet. However, expressed as total activity, ${\alpha}$-amylase in the digesta was greater in lambs fed the medium starch diet. In experiment 2, 12 wether lambs (23.5${\pm}$0.3 kg) were fed diets with finely cracked corn, coarsely cracked corn and whole corn. These dietary treatments continued for 35 d before tissue collection. Rumen escape starch increased with increasing corn particle size (p<0.05). ${\alpha}$-amylase activity in the pancreas and the small intestinal digesta was significantly greater (p<0.05) in lambs fed the coarsely cracked corn. These data suggest that increasing rumen escape starch results in a quadratic increase in total ${\alpha}$-amylase activity in the pancreas and the small intestinal digesta. Maximum ${\alpha}$-amylase activity is reached when rumen escape starch is about 100-120 g/d in 25-30 kg lambs.

Characteristics of Cationic Starches and Esterified Starches for ASA Sizing (ASA 유화용 양성전분과 에스테르화전분의 특성 평가)

  • Kim, Jong-Soo;Lee, Hak-Lae
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.40 no.4
    • /
    • pp.16-26
    • /
    • 2008
  • It is of great importance to decrease sheet break at the size press to enhance the runnability of today's high speed paper machines. To achieve this purpose it is required to control the penetration of the starch solutions at the size press. Use of ASA sizing system provides diverse advantages in improving machine runnability since it allows us to get rapid sizing development at the size press. Domestic paper industries, however, has not enjoyed these benefits of ASA sizing system mainly because of the poor efficiency of domestic corn starches used for ASA emulsification. To improve the emulsion stability and ASA sizing efficiency, it has been pointed out that new cationic starches are needed. In this study two methods of starch modifications, i.e. esterfication of cationic corn starch with OSA (Octenyl Succinic Anhydride), and acid hydrolysis by sulfuric acid were employed as methods to improve ASA sizing efficiency. The effect of these modification was compared with conventional cationic starches.

Physical and Chemical Characteristics of Punux Ginseng Starch (인삼전분의 이화학적 특성)

  • 오훈일;이송재
    • Journal of Ginseng Research
    • /
    • v.5 no.2
    • /
    • pp.114-121
    • /
    • 1981
  • Starch was isolated from 4-year-old and 6-year-old ginseng roots and its physical and chemical characteristics were studied. The results obtained were summarized as follows. 1. The shape of ginseng starch granules was polygonal and rounded with its granule size ranging from 2.0 to 7.5$\mu$. The swelling power of 4-year-old ginseng starch was much greater than that of 6-year old ginseng starch. Gelatinization pattern showed that 6-year-old ginseng starch gelatinized rapidly at $65^{\circ}C$, whereas 4-year-old starch continued to gelatinize, without having a definite gelatinization temperature as temperature increased 3. Amylogram of ginseng starch showed that gelatinization initiated at 61$^{\circ}C$ and was completed at 88$^{\circ}C$ with its viscosity reaching at 810 B.U. 4. The amylose contents were 32% and 9% for 4-year-old and 6-year-old ginseng starch, respectively. 5. X-ray diffraction analyses indicated that there were some structural differences between 4-year-old and 6-year-old ginseng starch.

  • PDF

Physicochemical Properties of Physically Modified Rice Starch by Homogenizer (균질기를 이용한 물리적 변성 쌀 전분의 이화학적 특성)

  • Han, Myung-Ryun;Kim, Myung-Hwan
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.34 no.5
    • /
    • pp.700-706
    • /
    • 2005
  • The objectives of this research were to analyze physicochemical properties of physically modified rice starch which was prepared by hydro-shear homogenizer and ultrasonic homogenizer. The 5:1 of water to starch ratio, 20,500 rpm of hydro-shear homogenizer, and 5 sec of pulse and 40 kHz of frequency of ultrasonic homogenizer, which were operated for 10 min. The 1/3 of size reduction of raw rice starch and gelatinized rice starch, and reduced of particle size were achieved by above processing conditions. The homogenization of raw rice starch and gelatinized rice starch were higher values of specific area, transmittance, solubility and swelling power than control. While, these had lower value of apparent viscosity than control. In raw rice starch, the gelatinization characteristics of ultrasonic homogenizer treated rice starch had some higher values of gelatinization temperature, peak temperature and enthalpy than those of control. While, those of hydro-shear homogenizer treated rice starch had similar values to those of control.

Determination of Microfiltration Membrane Fouling Characteristics by Liquid Displacement Method (액체전이법을 이용한 정밀여과막 오염의 특성 평가)

  • 장규만
    • Membrane Journal
    • /
    • v.9 no.4
    • /
    • pp.221-229
    • /
    • 1999
  • The nominal pore size 0.2 ${\mu}m polytetrafluroethylene(PTFE, Satorius Co,) membrane was used for the filtration of 0.1 wt% kaolin, bentonite, yeast, and starch solution, respectively. After filtration, the membrane was cleaned and the pore size was measured by liquid displacement method(LDMl using water/iso-butanol system. The pore size for new PTFE membrane evaluated by LDM was comparable with those of which were measured by mercury porosimetry and scanning electron microscope. The membrane pores were severely fouled, and constricted to below 0.3 ${\mu}m in the cases of bentonite and starch solution which contained smaller particles than pores. However, in the case of kaolin - solution, only some parts of membrane pores above 0.35 ${\mu}m were slightly fouled. Hence, the phenomena of membrane fouling could be identified quantitatively by the evaluation of pore size using LDM.

  • PDF

Effect of $CO_2$Gas injection on Properties of Extruded Corn Starch (탄산가스 주입이 압출팽화 옥수수전분의 성질에 미치는 영향)

  • 류기형;강선희;이은용;임승택
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.26 no.3
    • /
    • pp.436-442
    • /
    • 1997
  • Corn starch was extruded under relatively low shear, high moisture, and low temperature. Puffing of corn starch dough was induced by injecting $CO_2$gas in the range from 0MPa to 0.09MPa. Piece density and compressive modulus for puffed corn starch were decreased by increasing the injection pressure to 0.07MPa, and increased above 0.07MPa. the microstructure of corn starch puffed with $CO_2$gas showed thick cell size, compared with those puffed with steam. RVA paste viscosity curves of corn starch puffed with $CO_2$had different patterns from those puffed with steam, probably resulted from partial gelatinization of starch. Water absorption and solubility were not significantly changed by $CO_2$injection pressure, but the average degree of polymerization was reduced by higher $CO_2$injection. The water absorption, water solubility, and the average degree of polymerization for corn starch puffed with $CO_2$were significantly lower than those puffed with steam.

  • PDF

Cross-Linked Starch Microspheres: Effect of Cross-Linking Condition on the Microsphere Characteristics

  • Atyabi, Fatemeh;Manoochehri, Saeed;Moghadam, Shadi H.;Dinarvand, Rassoul
    • Archives of Pharmacal Research
    • /
    • v.29 no.12
    • /
    • pp.1179-1186
    • /
    • 2006
  • Cross-linked starch microspheres were prepared using different kinds of cross-linking agents. The influence of several parameters on morphology, size, swelling ratio and drug release rate from these microspheres were evaluated. These parameters included cross-linker type, concentration and the duration of cross-linking reaction. Microspheres cross-linked with glutaraldehyde had smooth surface compared with those prepared with epichlorhydrine or formaldehyde. The particle size increased with increasing the cross-linking time and increasing the drug loading. Swelling ratio of the particles was a function of cross-linker type but not the concentration or time of cross-linking. Drug release from starch microspheres was measured in phosphate buffer and also in phosphate buffer containing a-amylase. Results showed that microspheres cross-linked with epichlorhydrine released all their drug content in the first 30 minutes. However, cross-linking of the starch microspheres with glutaraldehyde or formaldehyde decreased drug release rate. SEM and drug release studies showed that cross-linked starch microspheres were susceptible to the enzymatic degradation under the influence of alpha-amylase. Changing the enzyme concentration from 5000 to 10,000 IU/L, increased drug release rate but higher concentration of enzyme (20,000 IU/L) caused no more acceleration.

Comparison of Physicochemical Properties of Several Korean Potato Starches (품종별 한국산 감자의 전분 특성 비교(I))

  • 김경애;김선민;정난희
    • Korean journal of food and cookery science
    • /
    • v.5 no.1
    • /
    • pp.53-62
    • /
    • 1989
  • Granular shapes and size, physicochemical properties and gelatinization properties of potato starches from Irish cobber (the dry type), Dejima (the moist type), Shepody and Superior were investigated. The starch granule was round or oval and the size of Irish cobbler and Shepody starch were $11~30\mu\textrm{m}$ and those of Superior and Dejima were$ 21~40\mu\textrm{m}$. Blue value, amylose content, relative crystallinity and density of Irish cobbler were the highest, but that of Dejima were the lowest. Water binding capacity, swelling power, transmittance. peak viscosity and breakdown of amylogram of Superior starch were the highest, but that of Irish cobbler starch were the lowest. Gelatinization temperature of DSC of Irish cobbler starch was the highest, but that of Superior starch was the lowest.

  • PDF

Changes in Molecular Weight Distribution and Enzyme Susceptibility of Rice Starch by Extrusion-cooking and Simple Heat-treatment (압출조리와 단순 열처리에 의한 쌀전분의 분자량 분포변화와 효소민감성에 관한 연구)

  • Kim, Yong-Bum;Kim, Ji-Yong;Lee, Cherl-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.6
    • /
    • pp.703-709
    • /
    • 1993
  • The changes in molecular size distribution of rice starch during extrusion cooking and simple heating of rice flour were compared and the effect of subsequent enzyme treatment on the molecular size was examined. A single-screw extruder was used with varing feed moisture contents ($17{\sim}29%$) and barrel temperatures ($100{\sim}150^{\circ}C$). An aluminium capsule immersed in oil bath ($100{\sim}200^{\circ}C$) was used for the simple heat treatment of rice flour. In case of extrusion cooking the mechanical energy input varied sharply at around 23% moisture content of the feed. At the feed moisture content of $17{\sim}23%$, a significant molecular size reduction of rice starch was observed by the gel permeation chromatography using Sephacryl S-1000 gel. The intact starch molecules of above $4{\times}10^{7}$ dalton were largely disintergrated by extrusion cooking of rice flour containing the moisture content less than 23%. It was mostly degraded further into the molecules having below $5{\times}10^{6}$ dalton by ${\alpha}-amylase$ treatment. But at the feed moisture content above 26% the starch did not show molecular size reduction either by extrusion cooking or by subsequent enzyme treatment. On the contrary little changes in molecular size of starch was occured by simple heating of rice flour containing the moisture less than 20%. but slight size reduction was observed at the moisture content above 23%, where the effect of ${\alpha}-amylase$ was also observed.

  • PDF