• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.92-97
• /
• 1994

The reports on the chemical composition of developing job's tears seeds is very insufficient by this time. The purpose of this study was to obtain the fundamental information on chemical component of the developing job's tears seed, including starch, sugar, oil, protein, fatty acid, Alkali Digestibility Value(ADV), 100-grain weight. Two job's tears varieties in different by maturity types were analyzed for those components from 10 days after heading to maturity, with 5-day intervals. Total sugar content in seeds followed a pattern of linear increase after heading, but it started to decreased around 15 days after heading. On the other hand, starch content continued to increased until maturity and the highest increasing occurred between 15 and 20 days after heading. The protein content of seeds was decreased, while oil content was increased through the ripening process. Starch content showed a positive correlation with 100-grain weight, ADV, oil and germination percent, but it had negative correlation between total sugar and protein contents in ripening process. Maximum starch content, 100 grain weight, and germination percent obtained by quadratic equation were attained 38 to 43 days after heading. So that the physiological maturity of job's tears seeds was considered to be 40 days after heading.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.23-25
• /
• 1994

To evaluate the quality difference between rice starch syrup Kochujang (RSSK) and rice flour Kochujang(RFK), moisture content, pH, titrable acidity, reducing sugar, amino nitrogen and color were measured for 90 days. Moisture content was no great difference between samples and was slowly increased during aging. pH of RSSK was 6.03 and that of RFK was 5.94 after mashing. And it was slowly decreased during aging. Titrable acidity was increased with no great difference between RSSK and RFK. Reducing sugar content of RSSK and RFK was 17.0% and 5.8% after mashing respectively. Reducing sugar content was increased till 40 days, but was decreased thereafter. Amino nitrogen content of RSSK was 123.6 mg% and that of RFK was 93.0 mg% after 20 day aging. Lightness of RSSK was higher than that of RFK, but redness was similar between RSSK and RFK.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.703-709
• /
• 1993

The changes in molecular size distribution of rice starch during extrusion cooking and simple heating of rice flour were compared and the effect of subsequent enzyme treatment on the molecular size was examined. A single-screw extruder was used with varing feed moisture contents ($17{\sim}29%$) and barrel temperatures ($100{\sim}150^{\circ}C$). An aluminium capsule immersed in oil bath ($100{\sim}200^{\circ}C$) was used for the simple heat treatment of rice flour. In case of extrusion cooking the mechanical energy input varied sharply at around 23% moisture content of the feed. At the feed moisture content of $17{\sim}23%$, a significant molecular size reduction of rice starch was observed by the gel permeation chromatography using Sephacryl S-1000 gel. The intact starch molecules of above $4{\times}10^{7}$ dalton were largely disintergrated by extrusion cooking of rice flour containing the moisture content less than 23%. It was mostly degraded further into the molecules having below $5{\times}10^{6}$ dalton by ${\alpha}-amylase$ treatment. But at the feed moisture content above 26% the starch did not show molecular size reduction either by extrusion cooking or by subsequent enzyme treatment. On the contrary little changes in molecular size of starch was occured by simple heating of rice flour containing the moisture less than 20%. but slight size reduction was observed at the moisture content above 23%, where the effect of ${\alpha}-amylase$ was also observed.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.155-161
• /
• 2011

The aim of this study was to determine the effects of different extrusion conditions on the saccharification characteristics( initial reaction velocity, reaction rate constant, yield) of extruded corn starch. Extruded corn starch-water slurries were mixed with alpha-amylase for the enzymatic saccharification. The saccharification yield of extruded corn starch was high at lower feed moisture content and higher barrel temperature. The solubility of extrudates increased with increase in the SME input which increased with increase in the feed moisture content. Starch hydrolysates having DE 63.8 was obtained after 2 hr reaction. The initial reaction velocity of the extrudate slurry with alpha-amylase was higher with decrease in the feed moisture content. The initial reaction velocity of extruded corn starch was the highest ($2.26{\times}10^{-3}mmol/mL{\cdot}min$) at 25% feed moisture content and $120^{\circ}C$ barrel temperature, 250 rpm screw speed. The pregelatinized starch was $1.83{\times}10^{-3}mmol/mL{\cdot}min$ as a control. Reaction rate constant was a similar trend to initial reaction velocity.

• Korean Journal of Microbiology
• /
• v.10 no.2
• /
• pp.79-86
• /
• 1972

The possibility of substituting potato or sweet potato for the wheat, one of the raw materials for soy sauce, was studied by measuring the amylase and proteolytic activities of Koji. Also optimum conditions of Koji making were determined. It was found that substitution of up to 30% (starch content) of wheat content (15% of the total bean and wheat content) with potato yielded good qulity of soy sauce. Use of more than 30% potato yielded a Koji of low enzymatic activity. This was attributed to the high moisture content of potato. It ws also found that substitution of up to 50% (starch content) of wheat content(25% of the total bean and wheat content) with sweet potato yieldede a good quality of soy sauce. But the taste was inferior to the control (the soy sauce which was made with 50% of bean and 50% of wheat).

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2009

This study was performed to analyze changes in the molecular structural and physical properties of modified corn starch, in which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of the modditied corn starch after pulverization decreased 50% and increased 567%, respectively. Content of low molecular substances mersured using gel permeation chromatography (GPC) increased from 21.0% to 86.5% after pulverizing corn starch. Damaged starch content also increased from 9.63% to 83.57% after pulverizing corn starch. After pulverization, gel formation capacity corn starch was reduced compared to that of control by structure breakdown.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1301-1313
• /
• 2021

This study investigated the effects of applying cellulase and starch on the fermentation characteristics and microbial communities of Napier grass silage after ensiling for 30 d. Three groups were studied: No additives (control); added cellulase (Group 1); and added cellulase and starch (Group 2). The results showed that the addition of cellulase and starch decreased the crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF) and pH significantly (p < 0.05) and increased water-soluble carbohydrate (WSC) content (p < 0.05). The addition of additives in two treated groups exerted a positive effect on the lactic acid (LA) content, lactic acid bacteria (LAB) population, and lactic acid / acetic acid (LA/AA) ratio, even the changes were not significant (p > 0.05). Calculation of Flieg's scores indicated that cellulase application increased silage quality to some extent, while the application of cellulase and starch together significantly improved fermentation (p < 0.05). Compared with the control, both additive groups showed increased microbial diversity after ensiling with an abundance of favorable bacteria including Firmicutes and Weissella, and the bacteria including Proteobacteria, Bacteroidetes, Acinetobacter increased as well. For alpha diversity analysis, the combined application of cellulase and starch in Group 2 gave significant increases in all indices (p < 0.05). The study demonstrated that the application of cellulase and starch can increase the quality of Napier grass preserved as silage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.573-579
• /
• 2010

This study investigated starch properties of 'Daehak waxy corn (DWC)' with different harvest times. The DWCs were harvested at 4 days before suitable time (BST), suitable time (ST) and 4 days after suitable time (AST). As harvest time was delayed, starch yield and amylopectin content of DWC starch increased from 43.21 to 52.73%, and from 90.79 to 92.83% based on dry weight, respectively. As harvest time was postponed, enzymatic digestibility and water solubility of DWC starch decreased from 81.43 to 80.58%, and from 10.23 to 9.23%. However, water binding capacity and swelling power of DWC starch increased from 227.94 to 244.88%, and from 24.75 to 29.74%, respectively. Retrogradation viscosity of starch was the lowest in DWC harvested at AST. There was a high correlation coefficient among starch properties of DWC, such as starch yield, enzymatic digestibility, water binding capacity, swelling power, water solubility and retrogradation viscosity (p<0.01). As harvest time was deferred, enzymatic digestibility, water solubility and retrogradation viscosity decreased; however, amylopectin content increased, and water binding capacity and swelling power significantly increased with increasing amylopectin content.

• Korean journal of food and cookery science
• /
• v.13 no.1
• /
• pp.7-15
• /
• 1997

The composition and polymeric structure of starch are the most important factors to determine the functional properties of rice. In an effort to relate the structural characteristics and its functional properties of starch in rice, molecular structural properties of starch from 6 rice cultivars were analysed. To relate the structure and function of starch the texture of Jeung-pyun made of rice were analyzed during retrogradation. The polymeric structure of rice starch was analyzed by debranching with isoamylase after gelatinization and fractionated with Sephadex G-75 gel filteration. The size fractionated debranched starch was categorized into four groups such as Fraction I, II, III and Intermediate Fraction depending in their max, The fractions with the max higher than 620 nm were designated as Fraction I, while those in the range of 600-620 nm and 540-600 nm as the Intermediate Fraction and Fraction II, respectively. The Fractions with the max lower than 540 were described as Fraction III. The average degree of polymerization (DP) of the Fraction I was estimated to be higher than 200, and those of other fractions, i.e. the Intermediate Fraction I, Fraction II and III were 150,45 and 25, respectively. The levels of Fraction I were varied from II to 35％ of total sugar. The Fraction I showed the linear relationship with the amylse contents, and the Intermediate Fraction, which might contain the mixture of short chain of amylose and debranched long chain of amylopectin, were measured to be in the range of 2.7∼8.4%. The levels of fraction II and III, both to be considered as the branches of amylopectin, were ranged 14.5∼23.6% and 39.7∼73.0%, respectively. The ratio of Fraction III to Fraction II describing the degree of branch or compactness of amylopectin was estimated to be around 4.0 for waxy varieties and around 2.0 for high amylose cultivars. With these results, it can be suggested that the degree of branch of the amylopectin may effect on amylose contents of starch or rice versa, To invertigate processing aptitude of different rice cultivars for the preparation of Jeung-pyun, its texture was analyzed by Instron, hardness, cohesiveness, elasticity, gumminess and chewiness of Jeung-pyun made of rice showed the significant relationship with the amylose content. Hardness was increased during retrogradation of product, but the relationship between hardness and amylose content due to not only difference in amylose content but also difference in structural characteristics of starch. In analysis of relationship between structure of rice starch and mechanical properties of Jeung-pyun during retrogradation elasticity did not show any relationship before retrogradation bur during retrogradation showed significant correlation. With these result, it can be suggested that the degree of branch of the amylopectin may effect on elasticity during retrogradation. However hardness, cohesiveness, gumminess and chewiness which were significant different before retrogradation, showed some correlation with structure of rice starch during retrigradation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.422-426
• /
• 2009

Sweetpotato is one of the important starch crops, current more considered as an industrial crop rather than food because it has higher starch content (over 80% of biomass), it is used for bio resources for industrial area. In this study, we generated S598A (a mutant gene of oat phytochrome A) sweetpotato plant using Agrobacterium-transformation method. Morphological characteristics of S598A plant were compared with the wild type sweetpotato, S598A had darker green leaves, increased chlorophyll content higher than to two-fold, delayed leaf senescence, shorter plant height (60% shorter than that of the wild type), more number of leaves and petioles about 1.8-fold, shorter petiole length (30% shorter), 1.2-fold more branches and 1.6-fold thicker stem diameters. From this study, S598A plants with such phenotypic characteristics might be able to use the solar energy efficiently, to have increased tolerance to biotic and abiotic stresses and finally to increase productivity (not only starch yield but also root biomass yield). S598A sweetpotato lines are under field trials.