• 한국농촌건축학회논문집
• /
• 제26권2호
• /
• pp.65-72
• /
• 2024

In order to analyze the impact of fine dust generated from a construction waste intermediate processing site on the surrounding areas, diverse types of samples were collected from inside the site and surrounding areas. The impact analysis results of samples are as follows. (1) Compared to the air quality management standards by the Ministry of Environment, the concentration of fine dust within the site was 30 to 46% for PM10 and 14 to 42% for PM2.5, which was not much different from the general air quality level. (2) It was found that PM10 within the site may have a partial effect on the air quality, but when the blocking facilities in the site, wheel washing facilities at vehicle entry and exit route, and sprinkler during working were maintained, the impact on the nearby area was not high. (3) In the case of PM2.5, its concentration was influenced more by the exhaust fumes from work vehicles than fine dust generated during construction waste processing. Since the PM2.5 concentrations in the site and surrounding area were not much different from the general air quality, there was little correlation with the work impact of construction waste intermediate processing sites. (4) Pb, an indicator of heavy metal components, was within 50ng/m³ in all three sites, which was 10% of the domestic management standard and equivalent to the general air quality level. The complaints from residents in nearby areas were filed using indicators based on visual and experiential information in their daily lives, so even if the survey results of environmental impact by the construction intermediate waste processing site are lower than the standard, nearby residents can feel it better than such numerical information. Therefore, specific activities to reduce find dusts should be continuously continued.

• 자원환경지질
• /
• 제56권5호
• /
• pp.557-564
• /
• 2023

우라늄 등의 핵물질은 원자력 발전의 연료로 사용되지만, 비평화적 용도로 전용될 가능성이 커서 이에 대한 국제적인 사찰과 규제가 이루어지고 있다. 핵물질 사용 시설에서 확보한 미세 입자상 물질의 동위원소 분석 자료는 핵물질의 기원 및 농축 방법등에 대한 중요한 정보를 제공할 수 있어 핵 안전 및 핵 사찰 분야에서 널리 활용되고 있다. 이번 연구에서는 국내 최초로 국내에 설치된 대형 이차이온 질량분석기를 활용해 미세 입자 시료에 대한 우라늄 동위원소를 측정한 결과를 소개한다. U-200 표준물질을 사용해 미세 입자의 위치를 확인하고 고정밀 정밀분석을 통해 오차범위내에서 표준값과 일치하는 결과를 얻을 수 있었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제45권3호
• /
• pp.225-232
• /
• 2022

Fine dust threatens human health in various forms, depending on the particle size, such as by causing respiratory, cardiovascular, and brain diseases, after entering the body via the lungs. The aim of this study was to correlate fine dust exposure with changes in brain blood flow in Sprague Dawley rats by using micro-positron emission tomography and elucidate the possibility of developing cerebrovascular diseases caused by fine dust. The subjects were exposured to an average fine dust (particulate matter 2.5) of 206.2 ± 7.74 to ten rats four times a day, twice a day for 90 min. Before the experiment, they were maintained at NPO to the maximize the intake of ¹⁸F-fluorodeoxy glucose(¹⁸F-FDG) and minimize changes in the ¹⁸F-FDG biomass depending on the ambient environment and body temperature of the rats. PET images were acquired in the list mode 40 min after injecting ¹⁸F-FDG 44.4 MBq into the rats tail vein using a micro-PET scanner pre and post exposure to fine dust. We found that the whole brain level of ¹⁸F-FDG standardized uptake value in rats averaged 5.21 ± 0.52 g/mL pre and 4.22 ± 0.48 g/mL post exposure to fine dust, resulting in a statistically significant difference. Fine dust was able to alter brain activity after entering the body via the lungs in various forms depending on the particle size.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.461-468
• /
• 2019

석탄화력발전소에서 발생하는 분진 효율을 높이고 미세먼지와 극미세먼지까지 집진할 필요성이 높아지고 있다. 상압 영역에서 운전되는 플랜트 발생 분진 제거를 위해서는 백필터나 전기집진기를 사용하나, 고온고압에서 운전되는 석탄가스화와 같은 경우는 금속필터나 세라믹필터가 사용된다. 고온고압에서 분진 집진을 위해 2종의 5겹 압착/소결한 금속필터를 제작하였고 이를 사용했을 때 분진 포집효율과 $10{\mu}m$ 이하 입자에 대한 포집 성능을 파악하였다. 석탄가스화 분진에 대한 금속필터의 집진효율은 무게기준으로 99%대에 달하였다. 제작한 금속필터 2종의 미세먼지 입자 이하(< $2.5{\mu}m$) 크기까지 집진성능을 파악하고자 JIS 분진 표준시료를 대상으로 실험을 수행하였고, $1{\sim}2.5{\mu}m$ 입자크기 범위에 대해 97%와 70~82%의 집진 성능을 확인하였다. $1{\mu}m$ 이하 입자크기 영역에서는 입자크기가 작아짐에 따라 제작한 금속필터의 집진효율이 급격히 낮아짐을 볼 수 있었다. 이러한 $1{\mu}m$ 이하 입자들에 대한 집진 제한점을 극복하고자 금속필터 성능의 개선 방안을 제시하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.157-160
• /
• 2006

Recently, trouble of sand supply is occurred according to exhaustion of natural sand resources. To solve this problem, sea sand and crushed sand are used. But, necessity of water reducing agent because quality of concrete that use sea sand and crushed sand is deteriorated. Therefore in this study was examined on the engineering properties of concrete with kind of fine aggregate and addition ratio of water reducing agents. As a result, compressive strength appeared similar standard regardless of kind of fine aggregate. Compressive strength, durability was similar in decrease of the unit water content by increase of addition ratio of the water reducing agent. Also, drying shrinkage resistivity was improved because the unit water content decreased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.385-390
• /
• 1997

In the mixing proportion of high flowing concrete we have to use quantity of power such as cement and superplasticizer, and increase the proportion of fine aggregate more than that of plain concrete to increase flowability and segregation resistance. Therefore, the fresh state of high flowing concrete is largely affected by superplasticizer and change of grade the percentage of surface water. This study aims at development of self-filling up high flowing concrete without compaction, in case of using the fine aggregate of standard grade range, by examination on the influence of fresh state of high flowing concrete, and by understanding influence on various fluidity such as flowability, reinforcement passibility, fillingability, segregation resistance.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.667-670
• /
• 2003

The purpose of this study is to present data for the reusing, reinforcement and estimation of safety of the RC structure damaged by fire, and for the prevention of explosive spalling by checking the character of explosive spalling according to kinds of fine aggregate, admixture and water-cement ratios. The materials used fine aggregates were sea sand, crushed sand and recycled sand, and the admixtures were fly ash and blast-furnace slag. Also the water-cement ratios was 55% and 30.5%. After those were heated respectively for 30 and 60 minutes in accordance with Standard Time-Temperature Curve. And then conditions of explosive spalling were divided into five grades, and characters of explosive spalling were investigated.

• 한국대기환경학회지
• /
• 제29권4호
• /
• pp.486-503
• /
• 2013

This paper has comprehensively reviewed fine dust control technology from emission sources. Owing to the stringent national regulation, domestic industries have made consistent efforts to develop the high efficiency facilities since 1960s. In these days, harmful particulate pollutants including dioxins and PAHs as well as $PM_{2.5}$ are also of critical interests in government and civic groups. In addition, simultaneous treatment of gas and particles is being widely studied. It is believed that hybrid facilities which integrate a few advanced equipment may meet the atmospheric guidelines.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2658-2663
• /
• 2008

In the present study, we designed a microfluidic flatform that generates monodisperse droplets with diameters ranging from hundreds of nanometers to several micrometers. To generate fine droplets, T-junction and flow-focusing geometry are integrated into the microfluidic channel. Relatively large aqueous droplets are generated at the upstream T-junction and transported toward the flow-focusing geometry, where each droplet is broken up into the targeted size by the action of viscous stresses. Because the droplet prior to rupture blocks the straight channel that leads to the flow-focusing geometry, it moves very slowly by the pressure difference applied between the advancing and receding regions of the moving droplet. This configuration enables very low flow rate of inner fluid and higher flow rate ratio between inner and outer fluids at the flow-focusing region. It is shown that the present microfluidic device can generate droplets with diameters about 1 micrometer size and standard deviation less than 3%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.191-192
• /
• 2018

This study is a fundamental study to utilize CGS from the IGCC as a fine aggregate for concrete. According to the study, the chemical composition of KS F 2527 was reviewed. The results showed that the KS F 2527 standard was generally satisfied, but the content of the sulfur trioxide(SO₃) exceeded the limit set by the molten slag. The possibility was found to be a fine metal based on chemicals other than sulfur trioxide(SO3).