• International Journal of Vascular Biomedical Engineering
• /
• 제4권2호
• /
• pp.19-24
• /
• 2006

Background: Pulse wave velocity (PWV), which is inversely related to the distensibility of an arterial wall, offers a simple and potentially useful approach for an evaluation of cardiovascular diseases. In spite of the clinical importance and widespread use of PWV, there exist no standard either for pulse sensors or for system requirements for accurate pulse wave measurement. Objective of this study was to assess the reproducibility of PWV values using a newly developed PWV measurement system in healthy subjects prior to a large-scale clinical study. Methods: System used for the study was the PP-1000 (Hanbyul Meditech Co., Korea), which provides regional PWV values based on the measurements of electrocardiography (ECG), phonocardiography (PCG), and pulse waves from four different sites of arteries (carotid, femoral, radial, and dorsalis pedis) simultaneously. Seventeen healthy male subjects with a mean age of 33 years (ranges 22 to 52 years) without any cardiovascular disease were participated for the experiment. Two observers (observer A and B) performed two consecutive measurements from the same subject in a random order. For an evaluation of system reproducibility, two analyses (within-observer and between-observer) were performed, and expressed in terms of mean difference ${\pm}2SD$, as described by Bland and Altman plots. Results: Mean and SD of PWVs for aorta, arm, and leg were $7.07{\pm}1.48m/sec,\;8.43{\pm}1.14m/sec,\;and\;8.09{\pm}0.98m/sec$ measured from observer A and $6.76{\pm}1.00m/sec,\;7.97{\pm}0.80m/sec,\;and\;\7.97{\pm}0.72m/sec$ from observer B, respectively. Between-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.14{\pm\}0.62m/sec,\;0.18{\pm\}0.84m/sec,\;and\;0.07{\pm}0.86m/sec$, and the correlation coefficients were high especially 0.93 for aortic PWV. Within-observer differences ($mean{\pm}2SD$) for aorta, arm, and leg were $0.01{\pm}0.26m/sec,\;0.02{\pm}0.26m/sec,\;and\;0.08{\pm}0.32m/sec$ from observer A and $0.01{\pm}0.24m/sec,\;0.04{\pm}0.28m/sec,\;and\;0.01{\pm}0.20m/sec$ from observer B, respectively. All the measurements showed significantly high correlation coefficients ranges from 0.94 to 0.99. Conclusion: PWV measurement system used for the study offers comfortable and simple operation and provides accurate analysis results with high reproducibility. Since the reproducibility of the measurement is critical for the diagnosis in clinical use, it is necessary to provide an accurate algorithm for the detection of additional features such as flow wave, reflection wave, and dicrotic notch from a pulse waveform. This study will be extended for the comparison of PWV values from patients with various vascular risks for clinical application. Data acquired from the study could be used for the determination of the appropriate sample size for further studies relating various types of arteriosclerosis-related vascular disease.

• 한국보건간호학회지
• /
• 제12권1호
• /
• pp.132-146
• /
• 1998

This Study was attempted to provide the basic data necessary in the development and introduction of Home Health Nursing System by investigating the recognition and attitude level of Home Health Nursing System. The data were collected by means of questionaires presented to 74 patients who had been admitted in C general hospital in Chon Ju, from June 30, 1997. As the tool for this study, the questionares developed by Kim Yong. Soon, et al (1990) and Han Bok Hee(1993) were modified and supplemented for the aim of this study. The computer was used for data analysis. The items about the charateristics of the subjects and the attitude to the management plan of Home Health Nursing System were represented as the frequency and percentage. The standard deviation and calculation average were produced on the items related to definition, recognition, necessity, expected effect of the attitude of Home Health Nursing System and the items related to admission. The ANOVA test was .used according to the characteristics of variables to analyze the necessity and difference of Home Health Nursing System. The results of this study were as follows 1) The general characteristics of the subjects were as follows ; for sex, man, $58.1\%$ ; for age, 50-59 years, $29.7\%$ ; for the level of education, high school, $51.4\%$ ; $79.7\%$ of them were married; for the family forms, small family, $73.0\%$ ; and $68.9\%$ of them take the monthly income over 100 million won. 2) The characteristics related to admissions of the subjects were as follows ; for clinic, surgical department, $78.4\%$ ; addmission not more then 7days, $47.3\%$ ; for the operation-performance $71.6\%$ of them were experienced; for the admission route, via outpatients clinic, $54.1\%$ ; for waiting period to the admission day, 1-2 days, $71.6\%$. 3) The difficulties comming from the hospitalization were related mostly to the factor that they felt hospital life more inconvenient than home.(3.66) The reasons for the difficulties in the admission which was due to insufficient beds in the hospital was related to the concentration to the general hospital because of 'The Whole National Medical Insurance System'(4.05). 4) On the previous informations about the Home Health Nursing System, those who have heard of only the name were 42 $(56.8\%)$, and on the recognition of it, they thought that it is periodic treatment by the licenced nurses for the recovering pateints after early discharge(3.73). On the attitude about the necessity of Home Health Nursing System, they thought that it is necessary because of the increasing trend of a psychological disease by the change of environment and complexity of the social structure(4.24). On the expected effect of Home Health Nursing System, they answered that it is convinient for the family of the patient to take care of them(4.l8). 5) On the attitude to the management plan of the Home Health Nursing System, those who had intention to participate in the system in the case of systemic support were 42(56.8). In the visiting time, 'visit periodically' and 'visit when the patient needs' were $28(37.8\%)$ respectively. For the application of medical insurance, if possoble, they will use $(91.9\%)$; for the method of payment for the treatment, 'pay by the time required' was $23(31.1\%)$, for the subject of management, 'National public institute must operate' was $33(44.6\%)$. 6) The relationship between the general characteristics of the subjects and the necessity of Home Health Nursing System showed the notable difference in the age (F=3.508, P<0.05) and marrage state (F=5.402, P<.023).

• Asia pacific journal of information systems
• /
• 제21권1호
• /
• pp.81-101
• /
• 2011

In today's rapidly changing and increasingly competitive business environment, new product development in tune with market trends in a timely manner has been a matter of the utmost concern for all enterprises. Indeed, developing a sustainable new business has been a top priority for not only business enterprises, but also for the government policy makers accountable for the health of Its national economy as well as for decision makers in what type of organizations. Further, for a soft landing of new businesses, building a government-initiated industry base has been claimed to be necessary as a way to effectively boost corporate activities. However, the existing methodology in new service and new product development is not suitable for nurturing industry, because it is mainly focused on the research and development of corporate business activities instead of new product development. The approach for developing new business is based on 'innovation' and 'convergence.' Yet, the convergence among technologies, supplies, businesses and industries is believed to be more effective than innovation alone as a way to gain momentum. Therefore, it has become more important than ever to study a new methodology based on convergence in industrial quality new product development (NPD) and new service development (NDS). In this research, therefore, we reviewed any restrictions in the existing new product and new service development methodology and the existing business model development methodology. In doing so, we conducted industry standard collaboration analysis on a new service model development methodology in the private sector and the public sector. This approach is fundamentally different from the existing one in that ours focuses on new business development under private management. The suggested framework can be categorized into industry level and service level. First, in the industry level, we define new business opportunities In occurrence of convergence between businesses. For this, we analyze the existing industry at the industry level to identify the opportunities in a market and its business attractiveness, based on which the convergence industry is formulated. Also, through the analysis of environment and market opportunity at the industry level. we can trace how different industries are lined to one another so as to extend the result of the study to develop better insights into industry expansion and new industry emergence. After then, in the service level, we elicit the service for the defined new business, which is composed of private service and supporting service for nurturing industry. Private service includes 3steps: plan-design-do; supporting service for nurturing industry has 4 steps: selection-make environment- business preparation-do and see. The existing methodology focuses on mainly securing business competitiveness, building a business model for success, and offering new services based on the core competence of companies. This suggested methodology, on other hand, suggests the necessity of service development, when new business opportunities arise, in relation to the opportunity analysis of supporting service based on the clear understanding of new business supporting infrastructure optimization. Meanwhile, we have performed case studies on the printing and publishing field with the restrict procedure and development system to assure the feasibility and practical application. Even though the printing and publishing industry is considered a typical knowledge convergence industry, it is also known as a low-demand and low-value industry in Korea. For this reason, we apply the new methodology and suggest the direction and the possibility of how the printing and publishing industry can be transformed as a core dynamic force for new growth. Then, we suggest the base composition service for industry promotion(public) and business opportunities for private's profitability(private).

• 분석과학
• /
• 제23권1호
• /
• pp.1-14
• /
• 2010

모든 전기전자제품에 대한 유해 중금속 규제법(RoHS)이 유럽과 중국 등 세계 각 나라에서 시작 되면서 이에 대한 중요성이 대두되고 있다. 이와 관련하여, 현재 세계 전기전자 협회(IEC)에서 발표된 IEC 62321 문건은 기존의 표준 분석 규격들과 마찰이 있을 수 있다. 반면에, IEC기술위원회(TC 111) 에서 발표된 시료 채취 및 처리 방법(sampling)에 관한 일반공개규격(Publicly Accessible Specification: PAS)은 기존 규격들과 상호보완적으로 응용될 수 있다. 이 실험에서는 PAS에 준하여 휴대폰시료를 분리 및 분해하는 방법을 찾고, 기존의 분석장치를 이용한 스크리닝방법과 비교하고자 하였다. X선 형광분석법(XRF)은 시료의 전 처리가 필요 없어서, 신속한 분석이 가능하므로 스크리닝에 탁월한 기능을 보여준다. 하지만 이 방법은 표면의 유해물질 정보만 알 수 있으며, 심각한 매트릭스 간섭과 정량을 위한 다양한 표준물질이 없다는 제약이 따르기 때문에, 이를 보완할 수 있는 방법이 필요하다. 본 연구에서는 레이저 박리 유도결합플라스마 질량분석장치(LA-ICP-MS), 에너지 분산형 XRF (ED-XRF) 와 전자주사현미경 에너지분산 X선분광기(SEM-EDX)를 휴대폰 스크리닝에 적용하여 보았으며, 유해중금속이 검출된 일부 부품의 경우에는 흑연로 원자흡수분광분석법(GF-AAS)을 수행하여 농도를 측정하였다. 이 실험결과, 배터리 일부 부품의 경우, GF-AAS와 XRF의 Pb 측정결과는 각각 0.92%와 5.67%로서 차이가 많이 나는 것을 알 수 있었다. 또한, XRF의 상대편차 범위 23-168%는 LA-ICP-MS의 편차 범위인 1.9-92.3% 보다 월등히 큰 것으로 나타났다. 결론적으로, 스크리닝 목적으로 XRF 분석방법을 이용하였다 할지라도, 정확한 함량을 얻기 위하여 GF-AAS의 분석을 수행해야 할 것으로 판단된다. 그리고, 기존 IEC 문건의 스크리닝 방법에는 언급되어 있지 않으나, 본 연구에서는 LA-ICP-MS가 전기전자제품 내에 있는 유해물질들에 대한 정보를 신속하게 얻을 수 있는 스크리닝 방법으로 활용될 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제39권5호
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• 한국의상디자인학회지
• /
• 제5권1호
• /
• pp.13-24
• /
• 2003

The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

• 인터넷정보학회논문지
• /
• 제16권1호
• /
• pp.47-55
• /
• 2015

최근, 병원정보시스템의 환경은 다양한 스마트 기술을 접목하고 있는 추세이다. 따라서, 스마트 폰, 테블렛 PC와 같은 다양한 스마트 디바이스가 의료 정보 시스템에 활용된다. 또한, 이러한 환경은 이기종 센서, 디바이스, 시스템 및 네트워크에서 실행되는 다양한 응용 프로그램으로 구성된다. 이들 병원 정보 시스템 환경에서, 기존의 접근 제어 방식에 의한 보안 서비스를 적용하는 것은 문제가 된다. 기존 보안 방식의 대부분은 접근제어 리스트 구조를 사용한다. 이는 클라이언트 이름, 서비스 객체 메소드 이름으로 접근 제어 매트릭스에 의해 정의된 접근만을 허용한다. 가장 큰 문제점으로는 정적인 접근 방법은 변화되는 상황에 신속하게 적응하지 못한다. 따라서, 우리는 보다 유연하고, 매우 상이한 보안 요구와 다양한 환경에 적용 할 수 있는 새로운 보안 메커니즘을 필요로 한다. 또한, 환자중심의 의료 서비스 형태로 변화되고 있어, 이를 해결하기 위한 연구가 요구된다. 본 논문에서는 스마트 모바일 환경에서 의료정보 동적접근 시스템을 제안하고자 한다. 우리는 기존 병원정보 시스템의 환경을 기반으로 동적접근 제어 방법으로 의료정보 시스템에 접근하는 방법에 중점을 두었다. 물리적인 환경은 모바일 x-ray 영상 디바이스와 전용 모바일 스마트 디바이스, PACS, EMR 서버와 인증 서버로 구성하였다. 소프트웨어 환경은 모바일 X-ray영상기기는 Windows7 OS를 기반으로 동기화 및 모니터링 서비스를 위해 .Net Framework를 기반으로 개발하였다. 그리고 전용 스마트 디바이스는 Android OS를 기반으로 JSP와 Java SDK를 통한 동적접근 응용 서비스를 구현하였다. 병원의 의료영상정보 서버와 모바일 X-ray영상기기, 전용 스마트 디바이스간의 의료정보는 의료영상정보 표준인 DICOM을 기준으로 한다. 또한 EMR 정보는 H7을 기반으로 한다. 동적접근 제어 서비스를 제공하기 위해, 우리는 산소포화도, 심박수, 혈압과 체온과 같은 생체 정보의 값에 대한 조건에 의해 환자의 상황을 분류하고, 의료진의 의료정보 접속 인증 방법으로 동적인 접근 방법을 설계했다. 이는 일반 상태와 응급상태로 2부분으로 구분하여 이벤트 추적 다이어그램으로 보였다. 그리고, 인증 정보는 ID/PWD와 위치, 역할, 작업시간 그리고 응급 환자를 위한 응급 코드를 포함하였다. 동적접근 제어 방법의 일반적인 상황은 인증 정보의 값에 의해 의료정보에 접근 할 수 있다. 그러나 응급상황의 경우는 인증 정보 없이 응급 코드에 의해 의료정보에 접근하도록 하였다. 또한, 우리는 의료정보 표준에 따라 환자, 의료진 및 의료 영상 정보로 구성되는 의료정보 통합 데이터베이스 스키마를 구축했다. 끝으로, 우리는 제안 시스템의 수행 결과를 일반과 응급상황과 같은 환자의 상태에 따라 스마트 디바이스 기반으로 동적접근 응용 서비스의 유용성을 보였다. 특히, 제안 된 시스템은 동적 액세스 제어 방법에 의해 응급상황에서 스마트 디바이스기반의 효과적인 의료 정보 서비스를 제공한다. 이 결과, 제안한 시스템이 u-병원 정보 시스템과 서비스에 유용할 것으로 기대한다.

• 대한간호학회지
• /
• 제4권3호
• /
• pp.63-79
• /
• 1974

1. The purpose of this study. The purpose of this study is to plan and investigate short-term nursing education of two-years associate degree program to produce middle-level professional nurses which are needed by-society and nation. Current nursing education in Korea is divided into four years degree program, three years diploma program Even (though) there are differences in the aims of their education, the curriculums are not much different between the education for producing leaders which is its basic purpose and training middle-level professional nurses. Therefore the purpose of associate degree program lies in minimizing the waste of time and finance which are invested for long-term education for middle-level professional nurses. And also this coincide with the policy of national technical training and definite supply of nurse manpower according to health policy for effective role and ability of nurse. 2. The method of study. This is based on the study of literature, research on the actual condition and investigation of opinion- through questionnaire. L) The study of literature: Domestic and foreign literatures for two years associate degree program were studied and investigated. 2) Research on the actual condition : Current three years nursing education program was collected and analysed. 3) Investigation of opinion. The problem of curried nursing education system and the possibility of two years associate degree program were investigated through questionnaire. 3. The result of the study. 1) The trend of recent nursing education. a. The aims of nursing in past chiefly taking care of physical disease of patient has recently changed to nursing of character including physical, mental, socio-economic, educational and psychological condition. b. For the performing systematic and effective nurse's duty according to her role, the-change of educational system which is classified as a range of education the period of education and certificate after graduation has been enforced or fulfilled. c. Nursing education also has a trend to become a collage or two years associate degree program which can get same legal protection as other educational institutions whose basic purpose is education. Attached nursing school to hospital is getting disappeared because of disadvantage of educational system. 2) Problems. Depending upon research on actual condition of current 3 years nursing education program. a. There are too many subjects. b. Contents of education could be doubled because major subjects are subdivided in detail. c. The credits for graduation are too heavy comparing to the period of study or the ability of students. (The necessary credits are 150.8 for three years according to actual investigation 4. There is no certain standard in organizing curriculum therefore there are too much differences between schools. 4. Basic Plan. The plan for two years associate degree program in nursing education depending on demand of professional nursing field of society is based on following items. 1) Training middle-level professional nurse lay emphasis on liberal arts and basic major field. 2) Liberal arts are divided into required and optional subjects and students could take courses by choice. 3) Major subjects are compound together by fields and they become the sciences of nursing Ⅰ,Ⅱ,Ⅲ,Ⅳ and every items has its educational purposes and contents major study includes laboratory practice and clinical experience. 4) The required credits for graduation are to which means 17-18 credits a semester. The above has been planned to solve the problems of current three years nursing education program. In conclusion for the achievement of this system, following items are needed. 1) It is necessary to change educational administration and system such as amendment of educational law or order of educational application of law. 2) Qualified professors should be available to understand and develope the idea or purpose of this educational system. 3) Local medical institutions should be opened widely and educational for clinical training. 4) The job after graduation should he secured positively.

• 한국건설관리학회논문집
• /
• 제16권1호
• /
• pp.52-63
• /
• 2015

국내 건축물 중 업무시설은 국가 경제발전 및 산업구도의 변화와 더불어 급속도로 보급되기 시작하여 2012년 수도권 기준 소방대상물 현황 31개종 중 공동주택 다음으로 많은 비중을 차지하고 있는 주요 시설물이다. 그러나 2014년 현재 수도권지역 업무시설 중 70% 이상이 사용기간 15년 이상으로 주요 건축 마감재의 노후화와 기능저하가 시작되는 등 수선이 시급한 업무시설이 지속적으로 증가하고 있는 실정이다. 특히, 업무시설은 사옥 또는 임대사무실의 목적으로 활용되고 있어 시설물의 노후화와 기능 저하가 초래될 경우 건축주와 유지관리 주체에게 임대 경쟁력 저하 및 부동산 가치 하락 등의 문제점을 가져올 수 있다. 이와 같은 시설물의 노후화와 기능 저하를 예방하기 위해서는 준공 후 경과연수에 따라 수선율을 기준으로 한 예방적 차원의 계획 수선을 필요로 한다(La et al. 2001). 이러한 수선율을 기준으로 하는 국내의 수선기준들은 그 대상의 범위가 주로 공동주택과 공공기관 시설물에 국한되어 있어 업무시설에 해당 기준을 적용하기에는 한계성이 있으며, 현업에서의 수선계획 수립을 위한 수선율 기준의 적용성 제고를 위해서는 필수적으로 연간단위의 마감재별 수선율 데이터가 요구되고 있는 것으로 조사 분석되었다. 따라서 본 연구의 목적은 6개소 업무시설의 실제 수선이력데이터를 수집 및 분석하여 업무시설을 대상으로 한 건축 마감재의 수선율 산정 모형을 개발하고 사례적용을 통해 도출된 마감재별 연간단위 수선율의 적정성을 검증하는 것이다. 본 연구의 결과물은 업무시설의 건축주 및 유지관리 주체들로 하여금 발생 가능한 돌발적 보수비용과 기회비용의 낭비를 예방케 함으로써 보다 효율적인 유지보수 예산의 계획과 집행을 가능하게 할 수 있을 것으로 기대된다.

• 한국지반공학회논문집
• /
• 제35권5호
• /
• pp.5-19
• /
• 2019

암반으로 구성되어 있는 급경사($65^{\circ}{\sim}85^{\circ}$)비탈면이 장기간 안정한 상태로 유지되고 있는 자연현상을 고려할 때, 설계 및 초기 시공 단계에서 위와 유사한 지반 상태로 이루어진 깎기 암반비탈면에 대해 1:0.5(발파암 경사 기준)보다 급한 경사를 적용할 수 있을 것이다. 급경사로 설계 가능한 양호한 연속체 암반비탈면의 안정성을 검토하는 과정에서, 설계실무 측면에서 범용적인 암반강도정수 산정방법이 필요하게 되었다. Hoek 등(2002)이 수정 보완하여 발표한 Hoek-Brown 파괴기준과 GSI분류는 불연속구조의 영향을 충분히 고려한 암반특성화 시스템으로 평가되었으며, 응력변화에 따라 등가 Mohr-Coulomb 강도정수(등면적법)를 산출하는 방법을 제안하였다. 비탈면에서는 등가 M-C 강도정수가 최대구속응력(${{\sigma}^{\prime}}_{3max}$ 또는 수직응력)변화에 따라 민감하게 변화하므로 실무적으로 활용하기에 어려운 점이 있다. 이 연구에서는 양호한 연속체 암반비탈면에 대해 최대구속응력 범위이내에서 범용적으로 적용할 수 있는 강도정수산정방법(등각분할법)을 H-B 파괴기준을 응용하여 제안한다. 등각분할법 강도정수(A)의 타당성 및 적용성을 평가하기 위해, 연구대상 암반비탈면을 기존 실시설계 현장 인근에 있는 급경사 비탈면에서 암석종류별(화성암, 변성암, 퇴적암)로 선정하고, Hoek이 제시한 등가 M-C 강도정수(등면적법)들과 비교 분석하였다. 등면적법 및 등각분할법 등가 M-C 강도정수는 기본적인 자료인 기존 실시설계 현장의 실내 암석 삼축압축시험과 연구대상 암반비탈면의 불연속구조의 특성조사(Face Mapping)를 통해 RocLab 프로그램(H-B 파괴기준을 기본으로 전산화된 지반정수 산정 소프트웨어)을 활용하여 산정하였다. 산정된 등면적법 등가 M-C 강도정수는 상호 연동되어 점착력과 내부마찰각이 아주 크거나($45^{\circ}$ 이상) 작게 나타났다. 등각분할법 등가 M-C 강도정수는 등면적법 등가 M-C 강도정수의 중간 정도이며, 내부마찰각은 $30^{\circ}{\sim}42^{\circ}$의 범위를 보인다. 연구대상 암반비탈면의 등각분할법 강도정수(A)와 기존 실시 설계 현장에서 연구대상 암반비탈면과 유사한 암반상태(동일 등급 RMR)에 적용한 강도정수(B)와 비교 분석하고, 이 지반정수들로 적용한 비탈면 안정해석(한계평형해석과 유한요소해석) 결과를 통해 제안한 등각분할법의 적용성을 간접적으로 평가하였다. A와 B의 강도정수 차이는 10% 정도이다. 한계평형해석 결과(우기 기준), A적용 안전율(Fs)=14.08~58.22(평균 32.9), B적용 안전율(Fs)=18.39~60.04(평균 32.2)이며, 각 동일한 암석종류에 따라 상호 유사하게 나타났다. 유한요소 해석 결과, A적용 변위=0.13~0.65mm(평균 0.27mm), B적용 변위=0.14~1.07mm(평균 0.37mm)으로 매우 유사하다. H-B 파괴기준을 응용하여 등각분할법으로 산출한 지반 정수를 실무적인 전단강도로 적용할 수 있는 적용성 평가에서 유의미한 결과를 확인할 수 있었다.