• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.25-26
• /
• 2021

System scaffolding and shoring are temporary structures in which vertical members, horizontal members, bracing members and trusses are assembled and installed. In order to ensure quality and safety, the quality test shall be carried out in accordance with the Guidelines for Quality Management of Construction Works (MOLIT Notice No. 2020-750). The quality test method (national standard) for Components for tied post system scaffolding and shoring is based on the Korean standards (KS F 8021) and the Safety certification standards (MOEL Notice No. 2021-22). However, the two standards differ in some aspects such as performance standards and etc, so cause confusion when applying them on-site. In addition, the standard for truss are applied only to trusses for shoring and cannot be applied to trusses for scaffolding. Therefore, this study aims to unify the two national standards and establish realistic standards.

• Journal of the Korean Society of Tobacco Science
• /
• v.35 no.1
• /
• pp.1-6
• /
• 2013

Near InfraRed Spectroscopy(NIRS) is a quick and accurate analytical method to measure multiple components in tobacco manufacturing process. This study was carried out to develop calibration equation of near infrared spectroscopy for the prediction of the amount of chemical components and hot water solubles(HWS) of reconstituted tobacco leaf. Calibration samples of reconstituted tobacco leaf were collected from every lot produced during one year. The calibration equation was formulated as modified partial least square regression method (MPLS) by analyzing laboratory actual values and mathematically pre-treated spectra. The accuracy of the acquired equation was confirmed with the standard error of prediction(SEP) of chemical components in reconstituted tobacco leaf samples, indicated as coefficient of determination($R^2$) and prediction error of sample unacquainted, followed by the verification of model equation of laboratory actual values and these predicted results. As a result of monitoring, the standard error of prediction(SEP) were 0.25 % for total sugar, 0.03 % for nicotine, 0.03 % for chlorine, 0.16 % for nitrate, and 0.38 % for hot water solubles. The coefficient of determination($R^2$) were 0.98 for total sugar, 0.97 for nicotine, 0.96 for chlorine, 0.98 for nitrate and 0.92 for hot water solubles. Therefore, the NIRS calibration equation can be applicable and reliable for determination of chemical components of reconstituted tobacco leaf, and NIRS analytical method could be used as a rapid and accurate quality control method.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.393-402
• /
• 2006

The contamination characteristics of BTEX and TPH components in silty soils with the oil leakage event from point source were studied. The over ratios of three soil pollution standard for TPH component were $1.5{\sim}1.7$ times higher than that of BTEX component. The mean and maximum values of BTEX and TPH components with sample points were B-zone > A-zone > C-zone, and the highest concentrations were measured at $1{\sim}2m$ depth below surface. BTEX and TPH components were increased with linear distance in zone within 120 m and 80 m from point source. For the zone more than 120 m, BTEX and TPH concentrations were under soil pollution standard. The cutoff values of indicator kriging using BTEX and TPH components were defined as confirmative limit, warn- ing limit and counterplan limit. The variograms of indicator-transformed data were selected linear model. The contamination ranges of BTEX and TPH components using confirmative limit and warning limit were estimated similar, but the contamination range of those using counterplan limit was much reduced. The maximum contamination probabilities were estimated by probability maps usinB confirmative limit, warning limit and counterplan limit. The maximum contamination probabilities with three soil pollution standard were estimated 26%, 26% and 13% for BTEX component, and 44%, 38% and 26% for TPH component.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.304-312
• /
• 2009

Automated design system of injection mold was developed in this study. Shapes of mold parts and mold base were defined according to standards of mold components and database modules of mold components were built. And then an automation program of mold design was developed by the user definition features, family table and Pro/Program of Pro/Engineer. The automatic production divided into mold base and standard parts was manipulated to manufacture parts meeting the design requirements and the selected parts were changed in size and shape to meet the design goals. The mold design was also carried out to have organic relations and be easy in case of a change to the mold part or mold base. As a result, it is possible to design the mold efficiently and conveniently modify the designed mold parts and base by using the developed automated design system in this study.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.6
• /
• pp.377-395
• /
• 2007

Near infrared(NIR) spectral data have been used for the noninvasive analysis of various biological samples. Nonetheless, absorption bands of NIR region are overlapped extensively. It is very difficult to select the proper wavelengths of spectral data, which give the best PCR(principal component regression) models for the analysis of constituents of biological samples. The NIR data were used after polynomial smoothing and differentiation of 1st order, using Savitzky-Golay filters. To find the best PCR models, all-possible combinations of available principal components from the given NIR spectral data were derived by in-house programs written in MATLAB codes. All of the extensively generated PCR models were compared in terms of SEC(standard error of calibration), $R^2$, SEP(standard error of prediction) and SECP(standard error of calibration and prediction) to find the best combination of principal components of the initial PCR models. The initial PCR models were found by SEC or Malinowski's indicator function and a priori selection of spectral points were examined in terms of correlation coefficients between NIR data at each wavelength and corresponding concentrations. For the test of the developed program, aqueous solutions of BSA(bovine serum albumin) and glucose were prepared and analyzed. As a result, the best PCR models were found using a priori selection of spectral points and the final model selection by SEP or SECP.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.149-156
• /
• 2003

The estimation of fatigue limit for the component with complicated shape is difficult than of standard fatigue specimen, due to complex test equipment. So, we substitute maximum principle stress from FEM results for fatigue limit diagram made by standard fatigue specimen. Then we can estimate endurance safety of component with high trust. The static stress analysis, the nonlinear contact stress analysis and the model analysis for turbine blade is performed by ANSYS ver. 5.6. the comparison of maximum static stress around hole with maximum contact stress between pun and hole can make the cause of fracture for turbine blade clear. The difference of fatigue limit between fatigue test by standard specimen and in-service mechanical components is due to surface roughness and machining condition etc. In in-service mechanical components, Goodman diagram has to consider surface roughness for failure analysis. To find fracture mechanism of torison-mounted blade in nuclear plant. This study performs the static stress, the nonlinear contact stress and the modal analysis on torison-mounted blade with finite element method and makes the estimation for safety of turbine blade.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.2
• /
• pp.141-145
• /
• 2006

In case of sense case manufactured by method of outage capacity, sensitivity is declined by outside effect and method of the photo electricity has a problem in transmission. therefore, packing case of composite sense should be developed to improve such a problem about influence of outside environment and its property evaluation has been performed. Mechanical property and result of analysis & test evaluation of Mat'l on aluminum die-casting(ADC 12type) Mat'l developed are as following. Tensile test piece, No. 4 of KS B 0801, has been applied to mechanical property test of Mat'l and It has been tested by method of metal mat'l tensile test(KS B 0802 : 2003). It can be found that physical property to KS(Korea Standard) is excellent. and homogeneous mechanical property appears. Test of Mat'l analysis has been performed by using OE Spectrometer, according to ASTM E 1251 : 1994 regulation. Consequently, good and homogeneous component contents classified by element to standard, except for Fe, have been obtained with coordination of Fe content as below 1.3% from composition standard of Aluminum Die-casting.

• Asian Journal of Business Environment
• /
• v.11 no.1
• /
• pp.5-15
• /
• 2021

Purpose: The study aims to delineate Shariah Governance Framework (SGF) by applying the components of New Institutional Theory (NIT) to provide an understanding of how Islamic banks theoretically influence Shariah Governance (SG) practice, structure, and process. Design/methodology/approach: As it is a conceptual paper, this paper has prepared based on an analytical approach to show how such institutions could provide a more effective system concerning the contents, procedures, and practices for the multiple users in the SG process of Islamic banks. Findings: The paper critically explores the adoption of NIT to develop SGF with its existing practice, structure, and procedure. Utilizing NIT, a proposed theoretical framework has developed for exploring the SG through its major components, i.e., 'isomorphism' and 'legitimacy'. It is stated that NIT can offer a useful framework by which homogenous structures, comprising guidelines, standards, and practices become recognized and authorized as a satisfactory standard corporate exercise. Thus, the proposed theoretical framework would be beneficial in understanding and exploring the SGF. Conclusion: The application of this SGF could help to justify the key dimensions of NIT with its overall formation, function, and practices that might also help to attain legitimacy.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.4
• /
• pp.294-302
• /
• 1999

Evaluation of Brinell standard hardness tester was carried out to secure its application as a national standard for Brinell hardness. Accuracies and reliabilities in load application, indenter diameter and indentation measurement were tested through evaluation of these components. The accuracies of load application for various loading conditions were within the limit of ISO and KS specifications. Errors in the indentation measurement due to the difference in personnel characters were successfully removed by utilising automatic indentation measurement system. In overall, the tester and the indentation measuring system were found to be eligible as a national standard of Brinell hardness.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.04a
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.