• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.230-239
• /
• 2006

The depth, width and alignment of fairway that are main port water facilities should be designed considering the various elements including particulars of design ships, weather and sea conditions around fairway and method of ship-handling. However not only the existing Japanese design standard for fairway and also those of other countries do not take into consideration of such kind of elements and no design standard is made by quantitative analysis. In this circumstance the new design standard (Approach Channels, A Guide for Design) depending on classified various elements and quantitative analysis was proposed in 1997 by PIANC and IAPH. But it was proved that calculated values according to this standard were unfounded and had some problems to output the discontinuous value by small difference of calculation condition because the each value fur each element was simply added. And also it is hard to apply this standard to the design of port water facilities in Japan because this [A Guide for Design] is the design standard for long channels in European port. The proposal of more reasonable Japanese standard will be expected by applying the study result of naval architecture and navigation and by the cooperation of ship operators to use fairway, naval architects to built ships and civil engineers to dredge fairway. The concept of a fairway in 'Design standard fur fairway in next generation' is defined as passage for approach channel) and traffic lane designated by light buoys as navigable water for safe navigation. In 'Design standard for fairway in next generation' depth, width and alignment are picked up among many design elements of a fairway. Design method for those elements is shown based on design ships and navigational environments. This standard shows the method of design for each dimension depending on characteristic on design ship and weather and sea condition. On the other hand, in case of existing fairway, it is possible to decide the size of ship and navigation criteria by opposite analysis.

• Mass Spectrometry Letters
• /
• v.4 no.4
• /
• pp.75-78
• /
• 2013

A gas chromatography/mass spectrometric (GC/MS) method was developed as a candidate reference method for the accurate determination of essential fatty acids (linoleic acid, ${\alpha}$- and ${\gamma}$-linolenic acids) in food supplemental oil products. Samples were spiked with three internal standards (stearic acid-$d_{35}$, $^{13}C_{18}$-linoleic acid, and $^{13}C_{18}$-${\alpha}$-linolenic acid). Samples were then subject to saponification, derivatization for methylation, and extraction by organic solvent. For GC/MS measurement, an Agilent HP-88 column, designed for the separation of fatty acid methyl esters, was selected after comparing with other columns as it provided better separation for target analytes. Target analytes and internal standards were detected by selected ion monitoring of molecular ions of their methyl ester forms. The GC/MS method was applied for the measurement of three botanical oils in NIST SRM 3274 (borage oil, evening primrose oil, and flax oil), and measurement results agreed with the certified values. Measurement results for target analytes which have corresponding isotope-labeled analogues as internal standard were calculated based on isotope dilution mass spectrometry (IDMS) approach, and compared with results calculated by using the other two internal standards. Results from the IDMS approach and the typical internal standard approach were in good agreement within their measurement uncertainties. It proves that the developed GC/MS method can provide similar metrological quality with IDMS methods for the measurement of fatty acids in natural oil samples if a proper fatty acid is used as an internal standard.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.25-42
• /
• 1998

Improvements to the Gumbel method of extreme value analysis of wind data made over the last two decades are reviewed and illustrated using sample data for Jersey. A new procedure for extending the Gumbel method to include M-th highest annual extremes is shown to be less effective than the standard method, but leads to a method for calibrating peak-over-threshold methods against the standard Gumbel approach. Peak-over-threshold methods that include at least the 3rd highest annual extremes, specifically the modified Jensen and Franck method and the "Method of independent storms" are shown to give the best estimates of extremes from observations.

• Korean Journal of Organic Agriculture
• /
• v.26 no.1
• /
• pp.1-17
• /
• 2018

This study analyzes the management performance of environmentally-friendly rice farms using GCM method based on the multifaceted approach. This approach compares the management performance of GCM farms before and after the introduction of GCM, as well as the performance of GCM farms with the performance of conventional farms. It also compares the technical and managerial competence level of surveyed GCM farms with that of conventional farms based on the standard diagnosis table developed by Rural Development Adminstration. Results showed that average income has increased after the introduction of the GCM method and the average income of GCM farms was higher than that of conventional farms, while the level of rice production in farms using GCM method was lower than that of conventional farms. In addition, the technical and managerial competence score of surveyed farms using GCM method was higher than that of conventional farms. These results implies that the higher management performance of GCM farms compared to the conventional farms is attributed to not only the GCM method but also the competence level of farms using GCM method.

• Proceedings of the Safety Management and Science Conference
• /
• 2009.11a
• /
• pp.269-288
• /
• 2009

After enterprise get a certification in acquisition, the core requirements of ISO/TS 16949 standard is pull out the Performance Indicators by process access approach during the settlement and operation of system, and the pulled key performance indicators classified into the customer intention process, support process and management process and analyzed the effect to the management result. This study conducted with following step. Firstly, preceding research, the literature and investigation analysis about process approach method which is the special characteristics of ISO/TS 16949 standard. Secondly, each process of ISO/TS 16949 standard is classified and deduced the key performance indicators followed process access method. Finally, get a enterprise survey data related to improvement of Performance Indicator and analyzed by SPSS statistical software.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.227-237
• /
• 2009

After enterprise get a certification in acquisition, the core requirements of ISO/TS 16949 standard is pull out the Performance Indicators by process access approach during the settlement and operation of system, and the pulled key performance indicators classified into the customer intention process, support process and management process and analyzed the effect to the management result. This study conducted with following step. Firstly, preceding research, the literature and investigation analysis about process approach method which is the special characteristics of ISO/TS 16949 standard. Secondly, each process of ISO/TS 16949 standard is classified and deduced the key performance indicators followed process access method. Finally, get a enterprise survey data related to improvement of Performance Indicator and analyzed by SPSS statistical software.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.29-34
• /
• 1999

We present a practical method for removing biotches and restoring their mission data. To detect blotches, we employ a robust approach of local analysis of spatiotemporal anisotropic brightness continuity Our approach uses first-order spatiotemporal directional derivatives to select the smoothest direction for each examined pixel, and puts out the incorruption probability that he examined pixel may not be corrupted by blotches. As the restoration filter, were employ a spatiotemporal fuzzy filter whose response is adaptively controlled according to a fuzzy rule defined by the incorruption probability. The fuzzy filter is composed of the two different filter of the identity filter and the spatiotemporal directional-weighted-mean filter, and will put out an intermediate value between the original input brightness and the directional-weighted-mean brightness. We design the fuzzy rule in advance by a standard supervised learning fuzzy rule in advance by a standard supervised learning method. The computer simulations are presented.

• Journal of the Korean Statistical Society
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2003

The continual reassessment method (CRM) provides a Bayesian estimation of the maximum tolerated dose (MTD) in phase I clinical trials. The CRM has been proposed as an alternative design of the standard design. The CRM has been modified to improve practical feasibility and, recently, the likelihood approach CRM has been proposed. In this paper we investigate the consistency and asymptotic normality of the modified likelihood approach CRM in which the maximum likelihood estimate is used instead of the posterior mean. Small-sample properties of the consistency is examined using complete enumeration. Both the asymptotic results and their small-sample properties show that the modified CRML outperforms the standard design.

• ETRI Journal
• /
• v.32 no.5
• /
• pp.801-809
• /
• 2010

This paper presents a statistical model-based noise suppression approach for voice recognition in a car environment. In order to alleviate the spectral whitening and signal distortion problem in the traditional decision-directed Wiener filter, we combine a decision-directed method with an original spectrum reconstruction method and develop a new two-stage noise reduction filter estimation scheme. When a tradeoff between the performance and computational efficiency under resource-constrained automotive devices is considered, ETSI standard advance distributed speech recognition font-end (ETSI-AFE) can be an effective solution, and ETSI-AFE is also based on the decision-directed Wiener filter. Thus, a series of voice recognition and computational complexity tests are conducted by comparing the proposed approach with ETSI-AFE. The experimental results show that the proposed approach is superior to the conventional method in terms of speech recognition accuracy, while the computational cost and frame latency are significantly reduced.

• Journal of the Korean Society for Railway
• /
• v.10 no.3 s.40
• /
• pp.365-371
• /
• 2007

The communication protocol for interface among railway signalling systems is designed and established as national standard in Korean from a few years ago. So the communication link for information transmission among railway signalling system can be a good example of application of this standard. Communication protocol which is standardized among Korean railway signalling is considered to apply information transmission. And we confirmed there is no the states of deadlock of livelock in std. protocol which is applied formal verification which is one of the analytic method for inspection of safety characteristics in the design course of protocol. But the safety of protocol has to necessarily accomplish this normal analysis approach about satisfying requirement matters with such this analytic approach. In this paper we analyzed the safety characteristics of standard protocol for Korean Railway signalling through the requirement matters for safety transmission of railway transmission system which is required in international standard. So through this study we confirm whether it satisfies safety requirement matters of the level which require in international standard and tried to confirm whether standard protocol has enough safety character in the real railway field.