• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.111-118
• /
• 2019

For the security of a vast amount of information, it has been started to diagnose the site as a way of operating and managing the information owned by a company holding assets, to establish indexes to check the actual status and all kinds of standards to obtain security, and also to classify the information assets based on that. This has been extended to many different areas including policies to operate and manage information assets, services, the management of owned devices as physical assets, and also the management of logical assets for application software and platforms. Some of these information assets are already being operated in reality as new technology in new areas, for example, Internet of Things. Of course, a variety of electronic devices like Smart Home are being used in ordinary families, and unlike in the past, these devices generate a series of information life cycles such as accumulating and processing information. Moreover, as even distribution is now being realized, we are facing a task to secure the stability of information assets and also information that assets are holding. The purpose of this study is to suggest and apply standard security policy by moduling methods for information assets owned by companies and even families and obtain the enhancement of confidentiality as well as integrity.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.429-432
• /
• 2011

The feasibility of applications of the char obtained from a gasification process of municipal-waste refuse derived fuel (RDF) as an auxiliary fuel was evaluated by combustion experiments. The higher heating value of the RDF char was 3000~4000 kcal/kg and its chlorine content was below the standard requirement demonstrating its potential as an auxiliary fuel. In the combustion exhaust gas, the maximum $NO_x$ and $SO_2$ concentrations were 240 ppm and 223 ppm, respectively. If an aftertreatment is applied, it is possible to control their concentrations low enough to meet the air pollutant emission standard. The HCl concentration was relatively high indicating that a care should be taken for HCl emission from the combustion of RDF. Based on the temperature distribution within the reactor, the concentration change of $O_2$ and $CO_2$, and the amount and the loss on ignition of solid residue, it was inferred that the combustion reaction was the most reliable when the excess air ratio of 1.3 was used.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.19-32
• /
• 2021

In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.

• Journal of the Daesoon Academy of Sciences
• /
• v.25_1
• /
• pp.25-85
• /
• 2015

In this study, source criticism (an establishment of authentic text) of the Hyun-Mu Sutra(玄武經) among different editions is studied and an attempt of a new interpretation appropriate to that is attempted. The Hyun-Mu Sutra, a scripture written in 1909, began to communicate with the world through the religions of Jeungsanism. In particular, it was remarkable that The Hyun-Mu Sutra was absorbed as canon textbooks Jeonkyung(典經), the Scriptures of Daesoonjinrihoe, The Fellowship of Daesoon Truth(大巡眞理) from a loner and secret pull-out of heritage traditions. However, this scripture though written in 1909 and more than 100 years has passed, remained in a state unestablished authentic text. The Hyun-Mu Sutra is the scripture consisted of 25 pages by the religions of Jeungsanism[Gang Il-sun 姜一淳(1871~1909)]. 33 page type of Hyun-Mu Sutra has been distributed in the world until now the authentic text of The Hyun-Mu Sutra. However, as a result of the examination, diagnostic scripture(病勢文) was found to have been added by descendants. After a review of authentic text of The Hyun-Mu Sutra, it concluded that there is no diagnostic scripture in primary The Hyun-Mu Sutra. Though The Hyun-Mu Sutra is a booklet of a small amount, the notation and expression is so unique, it has been in secrecy to read its contents. Interpretation way of The Hyun-Mu Sutra up to now can be summarized in two as follows. 1) approaches by I-ching 2) approaches by ten celestrial stemps and twelve earthly branches(10干12支). Approaches by I-ching among this sometimes was supplemented with Buddhist classification methods. Nevertheless, these studies can be evaluated limited because it fails to secure authentic text of The Hyun-Mu Sutra. In this study, the contents of The Hyun-Mu Sutra was examined itemized by focusing on the following four points. 1) The icon of The Hyun-Mu Sutra(玄武經符) is similar as normal talisman(符籍) but it has other features. 2) 'Reverse Fonts'(反書體)[the opposite view of the standard fonts(正書體), reflected in the mirror fonts] and size or location used in text is not in uniform. 3) letters in scripture were pointed and points were stamped in the left and upper and lower characters. 4) "Spiritual poem" (詠歌, the Korean traditional music with a view of elegance as an origin of eco), and the music with the Five-Sounds[宮Gung, 商Sang, 角Gak, 徵Chi, 羽Wu) were related. As a result, content analysis of The Hyun-Mu Sutra is carried out in the next four points. 1) The icon of The Hyun-Mu Sutra (玄武經符) has been primarily developed by Jeungsan. 2) 'Reverse Fonts'(反書體)[the opposite view of the standard fonts(正書體), reflected in the mirror fonts] and reverse location such as '宙宇' [the reverse of '宇宙'] represents based on a new world based on a forward and reverse I-ching(正易). 3) Dot and neighbor points is a symbolic map that guides the position of lateral new world(後天) and era(人尊) 4) Spiritual poem is the entrance to achieve the Realization of Do(道通). The above can be considered as the results of this study.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.577-588
• /
• 2002

Osseointegrated implants have been established as the standard treatment modality for full/partial edentulous patients since the 1960's, and the long term results for full edentulous patients have proven to be successful. Based on these results osseointegrated implants are now widely used for partial edentulous patients. There has been an increased interest towards the efficacy of wide implants, despite many reports mentioning the lower success rate of wide implants compared to regular implants. Recently, mandibular molar area defects are commonly restored using 2 wide implants, but it is not determined whether which treatment modality-3 regular implants or 2 wide implants-shows superior success rate. In this study, 2 wide implants and 3 regular implants used for the restoration of mandibular molar area are used to compare the survival rate of 1-4 years, and to analyze and compare the failure factors. The following conclusions could be drawn from this study. 1. Wide implants and regular implants showed 94.5% and 97,6% of survival rate respectively. After prosthodontic work, the survival rate was 100% and 98.1% for wide implants and regular implants respectively. 2. 5 failed implants have been removed. 2 wide implants and 1 regular implant have been removed due to failure of osseointegration. 1 wide implant was removed due to abscess formation caused by over-heating, and 1 regular implant was removed due to mechanical failure caused by over-loading within the first year of function. 3. No statistically significant difference was observed with respect to the amount of marginal bone loss of wide and regular implants.(P>0.05) In conclusion, restoration of the mandibular molar area using 3 regular implants was found to be a good treatment modality, and 2 wide implants could he considered a good treatment modality when success factors are taken into account.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2267-2277
• /
• 2012

The purpose of this study was to evaluate the effects of 7 minutes a day, 3 times a week, for 4 weeks of abdominal meridian massage with aroma oils (AMMAO) by Volunteers on the relief of constipation among hospitalized disability patients with brain lesions. One group pretest-posttest quasi experimental research design was used. Subjects were 38 hospitalized disability patients with brain lesions. Data were collected from May 9 to June 19, 2011. Frequencies, mean, standard deviation and Repeated Measures ANOVA with SPSS 19.0 were used to evaluate the effects of AMMAO. The results were as follows; 1. There were significant difference noted in the amount of defecation(F=3.56, p=.033) by time. 2. There were no significant difference was noted in the frequency of defecation, the frequency of suppository or enema application by time. Accordingly, it is concluded that AMMAO would be an effective nursing intervention in relief of constipation among hospitalized disability patients with brain lesions. Therefore it is recommended that AMMAO be used in clinical practice as an effective nursing intervention for hospitalized disability patients with brain lesions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4237-4244
• /
• 2015

This study examined the efflorescence characteristics of a concrete sidewalk block manufactured using recycled stone powder sludge and photocatalytic generated by surface polishing during the sidewalk block manufacturing process. The study evaluated the characteristics of the sidewalk block in terms of its quality, based on the amount of stone powder sludge used, efflorescence, and further based on the mixing ratio and number of applications of the photocatalytic. The experimental results indicated that heavy metals such as lead, hexavalent chrome, cadmium, and mercury were not present in the concrete sidewalk block, thereby confirming the effectiveness of the recycled stone powder sludge. The optimum mixing ratio of used in the concrete sidewalk block (for satisfying KS standard values such as water absorption ratio and flexural strength) was found to be 20%. The concrete sidewalk block incorporating the stone powder sludge and photocatalytic exhibited a water absorption ratio of 5.4% and flexural strength of 5.2 MPa, thereby satisfying the quality standards. Additionally, when the photocatalytic was used, efflorescence did not occur even at the low temperature of $-5^{\circ}C$, and the by the sidewalk block was found to be 70% under normal conditions and 68% when subjected to an accelerated weathering test.

• Clean Technology
• /
• v.25 no.2
• /
• pp.114-122
• /
• 2019

The synthesis of bio polyol from renewable resources has attracted attention in recent years. In particular, it is important to take advantage of bio polyols in the synthesis of polymers. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized using polycarbonate polyol/bio polyol (PO3G: polytrimethylene ether glycol prepared from 1, 3-propanediol produced by fermentation from corn sugar), methylene diphenyl diisocyanate (MDI) and 1,4-butandiol (BD). The properties of prepared polyurethane films and the cell structure of wet type artificial leather were investigated. As the bio polyol content increased, the tensile strength of polyurethane films decreased, however, the elongation at break increased significantly. As a result of thermal characteristics analysis, the glass transition temperature of polyurethanes increased when increasing the content of polycarbonate polyol. As a result of comparing the cell characteristics of wet type artificial leathers prepared in this study, it was found that the number and uniformity of cells formed in the artificial leather samples increased when increasing the content of polycarbonate polyol in polycarbonate polyol/bio polyol. From these results, it was found that DMF-based polyurethane containing an appropriate amount of bio polyol could be used for wet type artificial leather. The bio textile analysis system according to ASTM standard was used to measure the bio carbon content of polyurethane. The content of bio carbon increased proportionally with the increase of bio polyol content used in polyurethane synthesis.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.455-465
• /
• 2011

In order to assess and mitigate climate change, the role of forest biomass as carbon sink has to be understood spatially and quantitatively. Since existing forest statistics can not provide spatial information about forest resources, it is needed to predict spatial distribution of forest biomass under an alternative scheme. This study focuses on developing an upscaling method that expands forest variables from plot to landscape scale to estimate spatially explicit aboveground biomass(AGB). For this, forest stand variables were extracted from National Forest Inventory(NFI) data and used to develop AGB regression models by tree species. Dominant/codominant height and crown density were used as explanatory variables of AGB regression models. Spatial distribution of AGB could be estimated using AGB models, forest type map and the stand height map that was developed by forest type map and height regression models. Finally, it was estimated that total amount of forest AGB in Danyang was 6,606,324 ton. This estimate was within standard error of AGB statistics calculated by sample-based estimator, which was 6,518,178 ton. This AGB upscaling method can provide the means that can easily estimate biomass in large area. But because forest type map used as base map was produced using categorical data, this method has limits to improve a precision of AGB map.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.840-846
• /
• 2005

This study was carried out to investigate the effect of electron beam irradiation and cooking temperature on physico-chemical characteristics and lipid oxidation of beef. A total of six beef carcasses ($280\∼300 kg$) that were quality grade $1^{+}$(marbling score No.7, meat color No.4, maturity No.1, texture No.1) was purchased at the commercial slaughter house. The carcasses were transported and washed using high pressure water, and pasteulized with $ 50\% $ ethyl alcohol in the laboratory. After the carcasses were deboned and trimmed, loin and round were taken out to make steak (1.5cm thickness) or ground beef respectively. Samples were wrap or vacuum packaged and irradiated with 0, 3, 4.5, 6 and 7.5 kGy using electron-beam accelerator at Samsung Heavy Industries Ltd. Co. (in Taejun). Irradiated samples were cooked with different methods(electronic pan and gas oven) and temperatures ($ 60^{\circ}C, 70^{\circ}C and 80^{\circ}C$) and used to measure fatty acid composition, TBARS, cholesterol oxide products and panel test scores. The content of saturated fatty acids increased by increasing heating temperature in oven boiling steak (OBS) and pan boiling steak (PBS), and there was no difference by electron-beam irradiation. Both irradiated and non-irradiated treatment were high as the heating temperature increased in TBARS by heating temperature in PBS (p < 0.05) and the amount of Malonaldehyde (MA), standard of fat deterioration, was increased in OBS (p < 0.05). Non-irradiated and 3, 6 kGy treatment produced about 2 fold amount of MA at $ 60^{\circ}C $ compared with $ 80^{\circ}C $. In comparison with PBS, OBS produced much amount of MA and a bit different from non-irradiated treatment but did not show no tendency. As irradiation levels and heating temperature increased, the amount of cholesterol oxides products was increased and also pan-heating method, direct heating method, significantly increased the degree of oxidation compared with oven-heating method, indirect heating method (p < 0.05).