• 대한전기학회논문지:전력기술부문A
• /
• 제49권3호
• /
• pp.95-106
• /
• 2000

The load frequency control of power system is one of important subjects in view of system operation and control. That is even though the rapid load disturbances were applied to the given power system, the stable and reliable power should be supplied to the users, converging unconditionally and rapidly the frequency deviations and the tie-line power flow one on each area into allowable boundary limits. Nonetheless of such needs, if the internal parameter perturbation and the sudden load variation were given, the unstable phenomenal of power system can be often brought out because of the large frequency deviation and the unsuppressible power line one. Therefore, it is desirable to design the robust neuro-fuzzy controller which can stabilize effectively the given power system as soon as possible. In this paper the robust neuro-fuzzy controller was proposed and applied to control of load frequency over multi-area power system. The architecture and algorithm of a designed NFC(Neuro-Fuzzy Controller) were consist of fuzzy controller and neural network for auto tuning of fuzzy controller. The adaptively learned antecedent and consequent parameters of membership functions in fuzzy controller were acquired from the steepest gradient method for error-back propagation algorithm. The performances of the resultant NFC, that is, the steady-state deviations of frequency and tie-line power flow and the related dynamics, were investigated and analyzed in detail by being applied to the load frequency control of multi-area power system, when the perturbations of predetermined internal parameters. Through the simulation results tried variously in this paper for disturbances of internal parameters and external stepwise load stepwise load changes, the superiorities of the proposed NFC in robustness and adaptive rapidity to the conventional controllers were proved.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권5호
• /
• pp.185-190
• /
• 2002

Capacitor material utilized in the downsizing passive devices and dynamic random access memory(DRAM) requires the physical and electrical properties at given area such as capacitor thickness reduction, relative dielectric constant increase, low leakage current and thermal stability. Common capacitor materials, $SiO_2$, $Si_3N_4$, $SiO_2$/$Si_3N_4$,TaN and et al., used until recently have reached their physical limits in their application to several hundred angstrom scale capacitor. $Ta_2O_{5}$ is known to be a good alternative to the existing materials for the capacitor application because of its high dielectric constant (25 ~35), low leakage current and high breakdown strength. Despite the numerous investigations of $Ta_2O_{5}$ material, there have little been established the clear understanding of the annealing effect on capacitance characteristic and conduction mechanism, design and fabrication for $Ta_2O_{5}$ film capacitor. This study presents the structure-property relationship of reactive-sputtered $Ta_2O_{5}$ MIM capacitor structure processed by annealing in a vacuum. X-ray diffraction patterns skewed the existence of amorphous phase in as-deposited condition and the formation of preferentially oriented-$Ta_2O_{5}$ in 670, $700^{\circ}C$ annealing. On 670, $700^{\circ}C$ annealing under the vacuum, the leakage current decrease and the enhanced temperature-capacitance characteristic stability. and the leakage current behavior is stable irrespective of applied electric field. The results states that keeping $Ta_2O_{5}$ annealed at vacuum gives rise to improvement of electrical characteristics in the capacitor by reducing oxygen-vacancy and the broken bond between Ta and O.

• 수산경영론집
• /
• 제30권1호
• /
• pp.1-29
• /
• 1999

When the international fisheries order changes following the UN Law of the Sea, the new regional fisheries order is forming among East North Asian states and era of Economic Zones is really coming. In those changes of foreign and domestic fisheries environment, to maintain sustainable growth of the industry in 21st century the North East Asian states plot adjustments to fisheries management, such as introduction of the TAC system and others. The TAC seems to be an appropriate systematic response especially because traditional functions of fisheries management have already demonstrated their limits in regards to fisheries sustainable development. Introduction of the TAC to the North East Asian fisheries not only resolves the inability of traditional fisheries management to develop the industry consequently, but also strengthens the EEZ and existing marine management systems. However, the TAC was born by thewestern industrial mentality, still contains persistent mistakes and is difficult to change. Therefore, its introduction to and implication in North East Asian region might cause numerous problems. From this point of view, introduction of the TAC system will disregard peculiarities of North East Asian fisheries, so main efforts should be concentrated on improving the functions of existing system via consecutive step-by-step approach. In addition, the TAC should be grafted into the existing fisheries system through cooperative management system, creating stable systematic ground and considering scientific and fisheries motives. Especially, TAC system, unlike the traditional fisheries' management system, is scientific, being systematically developed one, and needs to be gradually installed, considering its systematic character. Therefore, the TAC should better be introduced by systematic and scientific approaches, paying more attention to strengthening the existing fisheries system, but not immediately and in the form it is right now. Concluding, introduction of the TAC can not be made considering the outward factors deriving from the UN Law of the Sea without corrections.'h overcome limitations and ineffectiveness of traditional fisheries, most efforts should be concentrated on basic revision of 21st centuries' fisheries and strengthening the functions of traditional fisheries aimed to develop the leading business of marine industries.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.153-159
• /
• 2010

가스터빈 연소기의 화염 특성을 알기 위하여 분할 연소기 시험을 수행하였다. 점화시험은 여러 가지 연소기 유입 공기속도와 공기과잉율에 따라 토치 점화장치를 이용하여 수행되었다. 또한, 연료를 충분히 공급한 상태에서 점화를 수행한 후 점차 연료량을 감소시켜가며 희박연소한계를 측정하였다. 실험 결과, 공기과잉율 6에서 안정한 점화를 보였고 이 값은 연소기 공기 유입속도에 따라 점점 증가함을 보였다. 최소 실화한계는 연소기 공기 유입속도 40 m/s에서 약 4였고, 이 값은 연소기 공기유입속도에 따라 약 10까지 증가함을 보였다. 화염특성 시험결과, 화염안정성은 연소기 유입속도가 커질수록 희박화염소실한계는 넓어짐을 알 수 있었고, 연소기 유입 공기속도가 약 65 m/s에서 가장 큰 화염소실한계를 보였다.

• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.529-534
• /
• 2008

Purpose: The objective of this study was to compare initial implant stability measured by RFA between different implant systems during the initial healing period. Material and Methods: Fifty-four patients (36 males/18 females) who had been treated at the Department of Periodontology, Chonbuk National University Dental Hospital during the period between January and November in 2007 were included in the study. The mean age of the subjects was 49 years old (18 to 77). A total of 104 implants (Type A: 3i $Osseotite^{(R)}$, Type B: $Replace^{(R)}$ select, Type C: ITI implant) were placed following the manufacturer's standard surgical protocols. Implant stability quotient (ISQ) readings were obtained for each implant at the time of surgery, 2-, and 4-month postoperatively. Result: No implant was failed during the observation period. At the baseline, the difference between mean ISQ values of 3 implant systems was statistically significant (p<0.05). However, at 2-, and 4-month following implant surgery, no significant difference was observed between ISQ values of the implant systems. In the same implant, the ISQ values of Type B and C implants increased (p<0.05), but those of Type A implants decreased during the 2-month healing period. The mean ISQ values of Type B and C implants showed a increasing tendency, while those of Type A implants were stable for the 4-month follow-up period. Conclusion: Within limits of this study, it can be concluded that implant design and surface topography of implant might influence the ISQ value and changing pattern during the initial healing period.

• Child Health Nursing Research
• /
• 제5권3호
• /
• pp.241-249
• /
• 1999

Diaper dermatitis, or commonly called 'diaper rash', is among the most prevalent cutaneous disorders of infancy and early childhood and important issue in nursing. The term itself is not diagnostic since it encompasses a variety of acute inflammatory reactions which are best regarded as a family of disorders arising from a combination of factors specifically attributable to the use of diapers Intensive study of the rash Process has shown that skin wetness and fecal enzyme activity are damaging to skin and lead to the development of diaper rash. This suggests that it is important to keep urine away from babies' skin, so that the skin remains as dry as Possible and maintains its barrier function abilities. Controlling the urine will also minimize the mixing of urine and feces within the diaper. which helps prevent the increased activity of enzymes that attack the skin and cause irritation. Therefore, a diaper that keeps the skin drier and limits the mixing of urine and feces will help Prevent the conditions that lead to diaper rash. Since their introduction about 35 years ago, disposable baby diapers have undergone many design and performance changes. In Particular. the Performance of diapers was advanced by the introduction of absorbent gel materials (AGMs) to Provide advantages in skin care. dryness, and leakage Protection Especially, important was the introduction of AGM which increased the absorbent capacity of the diaper several fold and Yielded marked reductions in the degree of skin hydration occurring under the diaper Studies show not only drier skin but more stable skin pH and less dermatitis with AGM diapers than with home-laundered cloth diapers or single-use diapers without AGM Minimizing diaper area skin wetness is important for managing and Preventing diaper rash. To minimize wetness, parents should use super absorbent diapers.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• 분석과학
• /
• 제15권6호
• /
• pp.496-501
• /
• 2002

Electrolyte cathode atomic discharge (ELCAD)는 용액 중에 포함된 미량 중금속을 연속 자동적으로 측정하기 위한 새로운 광학 측정기로서 플라스마에 의한 중금속들의 방출 강도를 측정하는 원자방출 분광법의 하나이다. 특히 이 방법은 검액을 전처리하지 않고 직접 분석할 수 있기 때문에 온라인 (on-line) 현장분석이 가능하다. ELCAD에서는 분위기 가스로 공기를 이용하고, 양극부분에 백금 전극을 사용하며, 음극에서는 연속적으로 전해질 시료를 주입하면서 플라스마를 형성하면서 미량의 중금속을 분석할 수 있다. 액상 글로우 방전의 기초 특성 연구로는 철의 원자 방출선 세기를 구한 다음 Einstein-Boltzmann식을 사용하여 플라스마 온도를 구한 다음 구리, 납, 철 및 니켈의 미량 분석 및 간섭 현상에 대해서 연구하였고, 검출 한계를 구하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.111-121
• /
• 1999

From the traffic analyses, and model constructions and verifications for speed prediction on the freeway ramp junctions with 70mph speed limit, the following results obtained: ⅰ) The traffic flow distribution showed a big difference depending on the time periods. Especially, more traffic flows were concentrated on the freeway junctions in the morning peak period when compared with the afternoon peak period. ⅱ) The occupancy distribution was also shown to be varied by a big difference depending on the time periods. Especially, the occupancy in the morning peak period showed over 100% increase when compared with the 24hours average occupancy, and the occupancy in the afternoon peak period over 25% increase when compared with the same occupancy.ⅲ) The speed distribution was not shown to have a big difference depending on the time periods. Especially, the speed in the morning peak period shown 10mph decrease when compared with the 24hours' average speed, but the speed did not show a big difference in the afternoon peak period.ⅳ) The analyses of variance showed a high explanatory power between the speed predictive models(SPM) constructed and the variables used, especially the upstream speed. ⅴ) The analysis of correlation for verifying the speed predictive models(SPM) constructed on the ramp junctions were shown to have a high correlation between observed data and predicted data. Especially, the correlation coefficients showed over 0.95 excluding the unstable condition on the diverge sectionⅵ) Speed predictive models constructed were shown to have the better results than the HCM models, even if the speed limits on the freeway were different between the HCM models and speed predictive models constructed.

• 한국멀티미디어학회논문지
• /
• 제11권4호
• /
• pp.516-524
• /
• 2008

본 논문은 기존에 연구되지 않았던 옷의 독특한 특징들을 묵시적 제한방법을 사용하여 강력한 제한력으로 구현하는 새로운 모델링 방법을 제안한다. 기존의 명시적 제한방법인 Baumgarte 안정화 방법은 해에 빠르게 수렴하도록 하기 위해 사용자가 시뮬레이션에 따라서 값이 달라지는 안정화 변수 값을 선택해야 하고, 시뮬레이션의 시간 간격 사용에 있어서 안정화에 한계가 있는 단점들이 있다. 본 논문은 큰 시간 간격에도 안정적이고, 안정화 변수 값을 요구하지 않고, 물리적으로도 적합한 물체의 움직임을 보장하는 묵시적 제한방법을 사용한다. 또한 묵시적 제한 방법의 계산 복잡도는 Baumgarte 안정화 방법과 같다. 본 논문은 묵시적 제한방법의 수식과 제한의 오차 분석을 설명하였고 옷의 솔기, 단추, 옷 주름, 옷의 구김, 과잉 늘어짐 방지 등의 복잡한 옷의 요소들에 대한 모델링 방법을 제시하였다. 본 논문에서 제안된 방법은 외부 상황에 의해 각종 제한들이 자동적으로 설정되고 제거되어 계산 비용을 절약함과 동시에 옷의 독특한 특징들의 구현을 통해 현실감 있는 옷 시뮬레이션의 결과들을 얻었다.