• Journal of Radiation Protection and Research
• /
• v.20 no.1
• /
• pp.8-15
• /
• 1995

An estimate of a change in radioactivity's circumstances around the nuclear power plant is validated with the results of the radioactivity measurements are compared. In this study, to further enhance the reliability of the results obtained from the environmental radioactivity measurements and analysis around the nuclear power plants that have been carried out up to the present. In the korea standard, there is the technical analysis guide for general stable chemical element's, but there is not the technical analysis guide for the radionuclei. therefore the environmental sample collection, the pretreatment of the sample and radionuclide analysis in the sample, the result's of the environmental radioactivity measurements by each organization, etc. are different. It is not sufficient for the database to forecasting a change in radioactivity's circumstances. A comparative study of collection and pretreatment techniques for the soil sample, the results by comparison, the method of minimizing the relative error are proposed. At one side of sample collection, there are going to considered that the surroundings of sample collection like the lay of the land, the provision of the selection standard for the area and pathway of radionuclide adhesion, the coherence of sample collection, etc.. at another side of pretreatment of the sample and measurement in the case of soil sample, how to do homogeneously the soil particle size and the standard tools, i.e. kinds of meshes, must to be selected.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.218-224
• /
• 2018

Macroglossia is an obstacle in regard to general prosthodontic restoration. Not only is it difficult to obtain support and stability from dentures manufactured from normal protocol, obtaining efficacy from basic mastication is also difficult. In such cases, realizing harmony between the occlusion and surrounding muscle structures may be important with regard to manufacture of stable full dentures, and it is necessary to form the appropriate polished surface for this case. The neutral zone is defined as the potential area resulting from the neuromuscular function that results in equilibrium between the outward force exerted by the tongue and the inward force exerted by the lips and cheeks. The artificial teeth of the full denture lies in this area, and if the polished zone follows the anatomic form of the dynamic muscles, the movement of the muscles simply acts as an element of stabilizing the dentures improving the esthetics through facial support.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.164-173
• /
• 2014

In underwater robotics, vision would be a key element for recognition in underwater environments. However, due to turbidity an underwater optical camera is rarely available. An underwater imaging sonar, as an alternative, delivers low quality sonar images which are not stable and accurate enough to find out natural objects by image processing. For this, artificial landmarks based on the characteristics of ultrasonic waves and their recognition method by a shape matrix transformation were proposed and were proven in Part 1. But, this is not working properly in undulating and dynamically noisy sea-bottom. To solve this, we propose a framework providing a selection phase of likelihood candidates, a selection phase for final candidates, recognition phase and tracking phase in sequence images, where a particle filter based selection mechanism to eliminate fake candidates and a mean shift based tracking algorithm are also proposed. All 4 steps are running in parallel and real-time processing. The proposed framework is flexible to add and to modify internal algorithms. A pool test and sea trial are carried out to prove the performance, and detail analysis of experimental results are done. Information is obtained from tracking phase such as relative distance, bearing will be expected to be used for control and navigation of underwater robots.

• Journal of Korea Foundry Society
• /
• v.40 no.2
• /
• pp.7-15
• /
• 2020

The high-temperature stability of Mg-8.0Zn-1.6Y (wt.%) alloys upon the addition of Ca has been investigated by characterizing the ignition temperature, microstructure, tensile and creep properties. The ignition temperature increases with an increase in the Ca content, indicating that an addition of Ca enhances the ignition resistance of the Mg-Zn-Y alloy. The as-cast microstructures of all tested alloys mainly consisted of the dendritic α-Mg matrix and I-phase (Mg₃Zn₆Y) at the grain boundaries. In the Ca-added Mg-8.0Zn-1.6Y alloys, the Ca₂Mg₆Zn₃ phase forms, with this phase fraction increasing with an increase in the Ca contents. However, a high volume fraction of the Ca₂Mg₆Zn₃ phase rather deteriorates the mechanical properties. Therefore, a moderate amount of Ca element in Mg-8.0Zn-1.6Y alloys is effective for improving the tensile and creep properties of the Mg-Zn-Y alloy. The Mg-8.0Zn-1.6Y-0.3Ca alloy exhibits the highest tensile strength and the lowest creep strain among the alloys investigated in the present study. The creep resistance of Mg-Zn-Y-Ca alloys depends on the selection of the secondary solidification phase; i.e., when Ca₂Mg₆Zn₃ forms in an alloy containing a high level of Ca, the creep resistance deteriorates because Ca₂Mg₆Zn₃ is less stable than the I-phase at a high temperature.

• Geophysics and Geophysical Exploration
• /
• v.11 no.1
• /
• pp.68-77
• /
• 2008

We have developed an inversion algorithm for loop-loop electromagnetic (EM) data, based on the localised non-linear or extended Born approximation to the solution of the 2.5D integral equation describing an EM scattering problem. Source and receiver configuration may be horizontal co-planar (HCP) or vertical co-planar (VCP). Both multi-frequency and multi-separation data can be incorporated. Our inversion code runs on a PC platform without heavy computational load. For the sake of stable and high-resolution performance of the inversion, we implemented an algorithm determining an optimum spatially varying Lagrangian multiplier as a function of sensitivity distribution, through parameter resolution matrix and Backus-Gilbert spread function analysis. Considering that the different source-receiver orientation characteristics cause inconsistent sensitivities to the resistivity structure in simultaneous inversion of HCP and VCP data, which affects the stability and resolution of the inversion result, we adapted a weighting scheme based on the variances of misfits between the measured and calculated datasets. The accuracy of the modelling code that we have developed has been proven over the frequency, conductivity, and geometric ranges typically used in a loop-loop EM system through comparison with 2.5D finite-element modelling results. We first applied the inversion to synthetic data, from a model with resistive as well as conductive inhomogeneities embedded in a homogeneous half-space, to validate its performance. Applying the inversion to field data and comparing the result with that of dc resistivity data, we conclude that the newly developed algorithm provides a reasonable image of the subsurface.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.192-200
• /
• 2012

For the development of genetically modified plants, it is important to verify various factors which potentially affect the risk assessment as well as to establish an experimental program to produce scientific and reliable data. However, it is a time and cost consuming process to develop GM plants as well as to prepare scientific and convincible data for government's approval. Therefore, using the transgenic hot pepper tolerant to a new CMV pathotype, we attempted to suggest few methodological procedures, such as probe saturation for southern blot analysis and RT-PCR and ELISA for expression analysis, for identification and stability evaluation of inserted gene in genetically modified plant which are required for submission for approval. Ten partially overlapped probes covering full length of inserted gene were produced. We could identify that the inserted gene was stacked as a single copy as well as no partial element existed. Also, we could identify the stability of the inserted gene stacked in hot pepper using probe saturation. In the expression analysis with RT-PCR and ELISA, we also could provide the stable expression of transcript and proteins in leaves and placenta and pericarp of fruits of the CMV-resistant hot pepper.

• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2000

Heaving of road and subsidence of slope took place at the Wiri region of the local highway 999 in Gyeongsangbukdo, Korea after heavy rain in the next year of construction. Although the state government had performed remedial treatments by reducing the angle and the height of the slope, deformation had never stopped. Therefore, we have preformed the analysis of deformation and stabilityof the slope. Study area consists of the Cretaceous shale, siltstone and sandstone and two faults are found. The major deformation occurred by sliding of rock mass along faults after heavy rain because not only thepore pressure at the fault plane and the unit weight of sliding mass increased, but did the shearstrength of saturated fault clay become very low. The decrease in shear strength of saturated fault clayis the major factor among the reasons for deformation. Numerical simulations using limit equilibriummodel, finite difference model and finite element model were performed for eight cross sections.Although safety factors are above 1.7 during the dry season, they become below 1.0 when groundwaterlevel raises to surface. The maximum displacement is about 15-3Ocm. However, safety factors increasedto above 2.4 and the maximum displacement is below 2.08cm after remedial treatment, Indicating thatthe slope becomes stable.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.41-70
• /
• 2005

The object of the study is to examine the change of social-economic structure and poverty-shape to escape poverty. In Korea, the working poor have been increased by flexibility and division of labor market since the economic crisis in 1997, and are faced with hard conditions due to the vulnerable welfare system. Especially the workers who engage in irregular jobs were increased by restructure of labor market. Besides they are in unstable employment terms such as low payment, low-skill and exclusion from welfare-benefit. Many small independent businessmen are also in danger of poverty for enterprises trend to move abroad by globalization. Poverty policy in our country was focused on the absolute poor class that has relation with old age, unemployment, disable, disease etc, so they were the object of welfare policy. The poverties, however, are increasing rapidly after the economic crisis, and they work so hard but are still poor, that is, participation in labor market doesn't become an element to escape poverty. Thus the emergence of new poverties whose core consists of the working poor becomes to need new poverty policy. The study is to survey change of their economic conditions, their welfare conditions, their experiences and responses of social dangers after the economic crisis, then to explore the policy to escape poverty. As the result of the study, it shows that the working poor experienced many kinds of social dangers like unemployment, decrease of income etc. In their welfare conditions as their responses to the social dangers, the benefit of social insurance, enterprise welfare like legal retirement pay and paid leave and private welfare such as private pension and insurance are low. The working poor are faced with social dangers, moreover, they don't have skill or education for adapting themselves to information society. The study says that it needs variable policies for the working poor to escape poverty, and suggests payment & tax policies as stable income policy, occupational discipline and skill-education for promoting the quality of employment, moreover, social insurance as expansion of social welfare policy and housing & education policies whose objects are the working poor.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.1
• /
• pp.31-39
• /
• 2015

The synergistic solvent extraction of rare earth elements such as europium and yttrium has been investigated by the extractant with crown ether as an additive. Macrocyclic ligand as host-guest compounds form more stable complexes with metal ions which have the similar size of the cavity of crown ether. In our previous study[14] founded that the extraction used fatty acid of the various alkyl chain length. Based on the results of the previous experiment, the synergistic separation effect of two metals investigated that the hexanoic acid had was the worst extraction effect which added a crown ether such as 18-crown-6 ether, 15-crown-5 ether, and 12-crown-4 ether. In this study, the concentrations of hexanoic acid have showed the separation effect, and then the concentrations and kind of crown ether are performed for synergistic extraction at the hexanoic acid concentration of the highest separation effect. As a results, the separation rate is the highest value of 1.72 at 0.05 M hexanoic acid, and 0.002M 15-crown-5 ether is the best value in other concentrations and kind of crown ether, it is about twice of using only hexanoic acid. Moreover, the extraction species of two metals has been founded $MLR_3{\cdot}3RH$ form when added the crown ether.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6977-6984
• /
• 2015

It is faced with the necessity of multi roll forming process of the ball slide rail which is made by adding the separate manufacturing processes, piercing, bending, trimming, to the roll forming process of a continuous plastic deformation, to improve the quality. However, the vibration and noise of the press machine in this process leads to the quality degradation of slide rail manufactured in this process. In this study, the roll was designed considering the optimal strain rates by the roll forming program with finite element method. And to estimate the static stability of the multi process the Von-Mises stress and deformation on the press was calculated with a structural analysis program. Also, to avoid driving systems in the resonance region their natural frequencies in the 1st and 2nd mode were calculated through the modal analysis. To verify its dynamic stability improvement the magnitudes of noise and vibration in the existing and studied system were compared using a microphone and accelerometers. And the widths and surface roughnesses of the rails which had been produced in the existing and studied process were measured. Therefore, it is known that multi roll forming process is stable in the analytical and experimental study.