• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.258-266
• /
• 2019

Objectives: In this study, blood lead was analyzed using graphite furnace atomic absorption spectrometry (GF-AAs) and inductively coupled plasma mass spectrometry (ICP-MS). We tried to examine the difference and consistency of the analytical values and the applicability of the analytical method. Methods: We selected 57 people who agreed to participate in this study. After confirming the linearity of the calibration standard curves in GF-AAs and ICP-MS, the concentrations of lead in quality control material and samples were measured, and the degree of agreement was compared. Results: The detection limit of the ICP-MS was lower than that of GF-AAs. The coefficient of variation of reference materials was shown to be stable in the ICP-MS and GF-AAs. When the correspondence between the two equipments was verified by bias of the analysis values, a concordance was shown, and approximately 98% of the ideal reference lines were present within ${\pm}40%$ of the deflection. Conclusion: GF-AAs showed high sensitivity to single heavy metal analysis, but it took much time and showed higher detection limit than ICP-MS. Therefore, it would be considered necessary to switch to ICP-MS analysis method, considering that the level of lead exposure is gradually decreasing.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.5
• /
• pp.349-356
• /
• 2022

Background: Awake fiberoptic intubation (AFOI) is the procedure of choice for securing the airway in patients with a difficult airway when undergoing surgeries under general anesthesia. An ideal drug would not only provide conscious sedation but also maintain spontaneous ventilation, smooth intubation conditions, and stable hemodynamics. We compared the effects of dexmedetomidine alone and dexmedetomidine in combination with fentanyl at a dose lower than the standard dose for achieving conscious sedation during AFOI in difficult airway patients undergoing oral cancer and dental surgeries. Methods: We included 68 adult patients undergoing AFOI. The patients were randomized in two groups, wherein Group D received intravenous dexmedetomidine 1 ㎍/kg and Group DF received dexmedetomidine 0.5 ㎍/kg and fentanyl 1 ㎍/kg. The outcomes measured were airway obstruction score, intubation scores, fiberoptic intubation comfort score, sedation score, and hemodynamic variables. Results: Low-dose dexmedetomidine with fentanyl showed similar results as those with the standard dose of dexmedetomidine in terms of airway obstruction, vocal cord movement, degree of cough, degree of limb movements, and intubation comfort. However, the sedation achieved and incidence of hypotension and bradycardia were higher in Group D than in Group DF. Conclusions: A low dose of dexmedetomidine-fentanyl provides satisfactory intubation conditions as those with a standard dose of dexmedetomidine in AFOI, thereby avoiding bradycardia, hypotension, and sedation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.657-659
• /
• 2022

Hydroponics and aquaponics are attracting attention as they enable automated farm management and stable production thanks to the spread of smart farms. There are issues that need to be addressed in applying smart farm, but one of them is to be able to respond flexibly to demand by automatically deciding when to ship, which requires a method for automatically determining the growth level of crops. In this paper, we focused on the simple fact that the area and volume occupied by crops increase with the growth of them, and showed that it is possible to monitor the growth process of crops with 2D and 3D cameras, and to determine the degree of growth of crops by calculating the area and volume. It is necessary to verify the method by applying it to various environments and crops, but in the case of common crops in hydroponics and aquaponics, it is possible to determine the growth level through the analysis of the acquired image through 2D and 3D camera.

• Journal of Veterinary Clinics
• /
• v.39 no.6
• /
• pp.353-359
• /
• 2022

Several suture patterns can be used for cystotomy closure, and a continuous suture pattern is the most commonly used. In this study, the fluid-tight ability and other suitabilities of continuous appositional sutures, such as the simple continuous suture pattern (SC), running suture pattern (RN), and Ford interlocking suture pattern (FI), were compared for cystotomy closure. Cystotomy closure was performed using each suture method in 10 cases of ex vivo swine bladders in each group. Suture time, leakage site, suture length, bursting pressure (BP), bursting volume (BV), and circular bursting wall tension (CBWT) were measured. Suture time and suture length were the shortest in RN and the longest in FI. Leakage occurred in two places: the incision line directly and the hole made by the suture. Leakage occurred through the incision line in 4 bladders of the RN group and 2 bladders of the FI group, but not in the SC group, and in the rest of the bladders, leakage occurred through the suture hole. The values of BP, BV, and CBWT increased in the order of FI, SC, and RN. Suture time and suture length can be considered as factors related to healing and side effects. In this study, leakage through the incision was found in a less appositional area; therefore, leakage through the hole could be considered an indicator of better apposition. Good apposition is one of the conditions required for ideal cystotomy closure. The bursting strength representing the fluid-tight ability can be expressed as the CBWT. RN is expected to be efficient and cause a small degree of foreign body reaction; however, it is expected to be less stable. FI has the greatest fluid-tightness ability, but it has been proposed that side effects due to foreign body reactions most frequently occur in FI. In conclusion, SC, which is expected to have a sufficient degree of fluid-tightness and appropriate recovery, is preferable to other continuous appositional suturing methods for cystotomy closure.

• Journal of the Korean Society of Food Culture
• /
• v.24 no.6
• /
• pp.728-738
• /
• 2009

The purpose of this study was to evaluate job stress factors of school food service nutritionists according to the number of years they have worked. The subjects of this survey included 125 nutritionists (69 from full-time employees and 56 from part-time nutritionists) from elementary school, middle school, and high school in the Gangwon area. The results showed that stress related to duty was the top job stress factor, followed by environment-related stress, personal stress, organization-related stress and stress caused by human relations. In terms of the degree of stress, part-time nutritionists have more stress compared to full-time nutritionists. This was especially true for nutritionists that had been employed for one year. In this case, the degree of stress was much higher than long time employed nutritionists. In terms of how to deal with job stress, school nutritionists eliminated stress directly (with direct countermeasures). In order to deal with stress, workers expected stable employment such as pay (wages), promotions, etc. In particular, part-time school nutritionists had stronger expectations. When correlation between job stress factors were examined, environment-related, duty-related, organization-related, human relations-related and personal stress were all shown to be mutually related.

• Smart Structures and Systems
• /
• v.32 no.5
• /
• pp.281-295
• /
• 2023

The purpose of this study is to demonstrate and verify the application of phase-control absolute-acceleration-feedback active tuned mass dampers (PCA-ATMD) to multiple-degree-of-freedom (MDOF) building structures. In addition, servo speed control technique has been developed as a replacement for force control in order to mitigate the negative effects caused by friction and inertia. The essence of the proposed PCA-ATMD is to achieve a 90° phase lag for a structure by implementing the desired control force so that the PCA-ATMD can receive the maximum power flow with which to effectively mitigate the structural vibration. An MDOF building structure with a PCA-ATMD and a real-time filter forming a complete system is modeled using a state-space representation and is presented in detail. The feedback measurement for the phase control algorithm of the MDOF structure is compact, with only the absolute acceleration of one structural floor and ATMD's velocity relative to the structure required. A discrete-time direct output-feedback optimization method is introduced to the PCA-ATMD to ensure that the control system is optimized and stable. Numerical simulation and shaking table experiments are conducted on a three-story steel shear building structure to verify the performance of the PCA-ATMD. The results indicate that the absolute acceleration of the structure is well suppressed whether considering peak or root-mean-square responses. The experiment also demonstrates that the control of the PCA-ATMD can be decentralized, so that it is convenient to apply and maintain to real high-rise building structures.

• Clinics in Shoulder and Elbow
• /
• v.3 no.2
• /
• pp.87-94
• /
• 2000

Purpose : The purpose of this study was to evaluate the activity of the biceps brachii muscle in the vulnerable abduction and external rotation position of the shoulder in patients with anterior instability. Materials and Methods: This experimental study include a prospective analysis of the electromyographic(EMG) data on a group of patients with traumatic unilateral anterior instability of the shoulder. The EMG data of unstable shoulders was compared with those of opposite shoulders as control. The optimal sample size for the case-control study was calculated using an nQuery Advisor program(nQuery Adviser 3.0, Statisticl solutions Ltd., Ireland). The EMG analyses were conducted in 76 shoulders in 38 patients who had a traumatic anterior instability in one shoulder. The EMG records were obtained at different position of shoulder, which included 0° , 45° , 90° and 120° of shoulder abduction. In each angle of shoulder abduction, the arms were placed in an external rotation as tolerated by the anterior apprehension. The paired-sample T test was used to compare the difference of the root mean square(RMS) voltages between the stable and unstable shoulders in each degree of arm position. Results : The RMS voltage of the biceps muscle was significantly greater in the unstable shoulder than opposite stable shoulder in all position of the arm(p<0.001). The RMS voltage of the biceps was maximal at 90° and 120° of external rotation in the unstable shoulder(p<0.05). The RMS voltage of the supraspinatus muscle revealed no differences in any of the test conditions(p=0.904, 0.506, 0.119 and 0.781 in 0° , 45° , 90° and 120° , respectively) Conclusion: In the vulnerable abduction and external rotation position, the biceps muscle plays an active compensatory role in the unstable shoulder while not in the stable shoulder.

• Carbon letters
• /
• v.28
• /
• pp.31-37
• /
• 2018

This paper examines a simple one-step and catalyst-free method for synthesizing carbon nanoparticles from aliphatic alcohols and n-hexane with linear molecule formations by using a stable solution plasma process with a bipolar pulse and an external resistor. When the external resistor is adopted, it is observed that the current spikes are dramatically decreased, which induced production of a more stable discharge. Six aliphatic linear alcohols (methanol-hexanol) containing carbon with oxygen sources are studied as possible precursors for the massive production of carbon nanoparticles. Additional study is also carried out with the use of n-hexane containing many carbons without an oxygen source in order to enhance the formation of carbon nanoparticles and to eliminate unwanted oxygen effects. The obtained carbon nanoparticles are characterized with field emission-scanning electron microscopy, energy dispersive X-ray spectroscopy, and Raman spectroscopy. The results show that with increasing carbon ratios in alcohol content, the synthesis rate of carbon nanoparticles is increased, whereas the size of the carbon nanoparticles is decreased. Moreover, the degree of graphitization of the carbon nanoparticles synthesized from 1-hexanol and n-hexane with a high carbon (C)/oxygen (O) ratio and low or no oxygen is observed to be greater than that of the carbon nanoparticles synthesized from the corresponding materials with a low C/O ratio.

• Journal of Chest Surgery
• /
• v.44 no.3
• /
• pp.208-214
• /
• 2011

Background: Periprocedural treatment with high-dose statins is known to have cardioprotective and pleiotropic effects, such as anti-thrombotic and anti-inflammatory actions. We aimed to assess the efficacy of high-dose rosuvastatin loading in patients with stable angina undergoing off-pump coronary artery bypass grafting (OPCAB). Materials and Methods: A total of 142 patients with stable angina who were scheduled to undergo surgical myocardial revascularization were randomized to receive either pre-treatment with 60-mg rosuvastatin (rosuvastatin group, n=71) or no pre-treatment (control group, n=71) before OPCAB. The primary endpoint was the 30-day incidence of major adverse cardiac events (MACEs). The secondary endpoint was the change in the degree of myocardial ischemia as evaluated with creatine kinase-myocardial band (CK-MB) and troponin T (TnT). Results: There were no significant intergroup differences in preoperative risk factors or operative strategy. MACEs within 30 days after OPCAB occurred in one patient (1.4%) in the rosuvastatin group and four patients (5.6%) in the control group, respectively (p=0.37). Preoperative CK-MB and TnT were not different between the groups. After OPCAB, the mean maximum CK-MB was significantly higher in the control group (rosuvastatin group $10.7{\pm}9.75$ ng/mL, control group $14.6{\pm}12.9$ ng/mL, p=0.04). Furthermore, the mean levels of maximum TnT were significantly higher in the control group (rosuvastatin group $0.18{\pm}0.16$ ng/mL, control group $0.39{\pm}0.70$ ng/mL, p=0.02). Conclusion: Our findings suggest that high-dose rosuvastatin loading before OPCAB surgery did not result in a significant reduction of 30-day MACEs. However, high-dose rosuvastatin reduced myocardial ischemia after OPCAB.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.168-174
• /
• 2002

A new circulating hydroponic system was invented for oriental melons grown in the greenhouse. For developing nutrient solution management techniques, we examined the changes of nutrient contents of circulating solution in three different types of new hydroponic systems. The yield and fruit quality of oriental melons in Hydroponics were better than those in soil culture. The substrate culture was appropriate fer hydroponics of oriental melons, and NFT was turned to be the opposite due to the physiological disorder during hot seasons. Yamazaki's melon solution with EC 2.0dS.m$^{[-10]}$ was the most appropriate for oriental melons. The new circulating hydroponic system seemed to be appropriate for oriental melons because of the stable EC, pH and the macro- and micro-element contents. NO$_3$-N, Ca and Mg contents in the circulating solution kept a good balance in all types of hydroponics. However, p content, compared to other types, decreased by the degree of 1 me.L$^{[-10]}$ in perlite medium. K content showed irregular status in perlite but showed the stable status in cocopeat. Generally, microelements, except Mo, showed stable absorption in the substrate culture. However, in NET, most of the elements showed irregular absorption except B and Mn. Microelement absorption, especially Cu, Zn and Mo, decreased during hot seasons.