• 공업화학
• /
• 제26권1호
• /
• pp.99-103
• /
• 2015

본 연구에서는, 그래핀 옥사이드(GO)의 환원에 가장 보편적으로 사용되는 3종류의 환원제를 사용하여 환원 그래핀 옥사이드(RGO)를 제조하였다. 합성된 3종류 RGO의 화학적 구조를 비교/분석하여 구조적 특징에 따른 전도도 및 분산성의 차이를 고찰하였다. Ethylene glycol을 사용한 경우에는 환원도가 낮고 전도도도 상대적으로 낮았다. 반면에 hydrazine과 thiourea dioxide (TU)를 사용하여 합성한 RGO에서는 환원 정도, 전도도 및 물에서의 분산성 등에 차이가 거의 없었다. 그러나 N-methylpyrrolidone에서의 분산성은 TU에 의해 합성된 RGO에서 가장 우수하여 4개월 후에도 안정적인 분산액을 유지하였다.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.128-134
• /
• 2003

광섬유의 색 분산과 자기 위상 변조 외에 상호 위상 변조 효과에 의해 왜곡된 WDM 채널 신호가 MSSI(Mid-Span Spectral Inversion) 기법을 통해 전송 거리에 따라 보상되는 정도를 다양한 광섬유 분산 계수를 고려하여 분석해 보았다. 본 연구에서 고려된 시스템은 전체 전송로의 중간에 비선형 매질로 HNL-DSF (Highly nonlinear dispersion shifted fiber)를 갖는 광 위상 공액기를 두고, 광 위상 공액기를 중심으로 첫 번째 전송 구간에서의 평균 강도와 두 번째 전송 구간에서의 평균 강도를 같게 하는 PAIA (Path Averaged Intensity Approximation) 방식의 MSSI 기법을 채택한 $3{\times}40$ Gbps 강도 변조 직접 검파 방식의 WDM 시스템이다. XPM에 의한 왜곡의 보상 측면에서 광섬유의 분산 계수가 비교적 큰 WDM 시스템일수록 MSSI 기법이 더욱 효과적으로 적용되어 전송 거리를 신장시킬 수 있는 것을 확인할 수 있었다. 또한 색 분산, SPM 외에 XPM의 영향을 받아 왜곡된 채널 신호는 MSSI 기법을 통해 광섬유의 분산 계수가 큰 시스템에서 더욱 안정되게 보상된다는 것을 알 수 있었다.

• 실천공학교육논문지
• /
• 제11권2호
• /
• pp.181-193
• /
• 2019

기업현장교사는 회사 내 일학습병행에 참여하고 있는 도제 및 고숙련 학습근로자에게 고도화된 훈련 지도 및 평가자로서의 역할을 수행하므로 심화된 이론과 기술, 풍부한 경험과 문제해결 능력이 요구된다. 본 연구는 양질의 기업현장교사 양성을 위한 한국의 학위연계형 고숙련마이스터 과정을 소개하고, 최적화된 표준 교과 모델을 제시하였다. 이는 고숙련마이스터 양성과 관련된 최초의 실증적 연구로서, 일학습병행제 고숙련마이스터 양성에 기여함은 물론 안정적인 고숙련마이스터 과정의 제도적 정착 및 활성화에 크게 기여할 것으로 사료된다.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.381-393
• /
• 2014

본 연구는 방문간호사의 방문건강관리 서비스 수행도와 방문간호사의 일반적인 특성에 따른 수행도의 차이를 분석하기 위해 시도되었다. 연구대상자는 대구시와 경상북도의 방문간호사 총 204명을 대상으로 실시되었고, 연구기간은 2011년 7월 1일부터 8월 30일까지이었다. 방문건강관리 서비스 수행업무 중 당뇨병 환자관리와 고혈압 환자관리를 가장 많이 수행하였고, 반면에 임산부 관리와 영유아 건강관리 업무에 대한 수행 빈도가 가장 낮았다. 방문간호사의 일반적인 특성 중에서 연령, 기혼, 교육수준, 종교, 보건소 근무경력, 방문간호 업무경력, 근무지역에 따라 방문건강관리 서비스 수행도의 차이가 있었다. 따라서 맞춤형 방문건강관리의 안정적인 정착과 활성화를 위해서는 방문간호사의 일반적인 특성을 충분히 고려한 업무 배정과 고용 보장 등을 포함한 방문간호사의 관리방안이 강구되어야 할 것이다.

• 천문학논총
• /
• 제30권3호
• /
• pp.811-819
• /
• 2015

The e-CALLISTO is a network of CALLISTO (Compact Astronomical Low-frequency, Low-cost Instrument for Spectroscopy in Transportable Observatories) spectrometers which detect solar radio bursts 24 hours a day in frequency range 45-870 MHz. The number of channels per spectrum is 200 and the time resolution of whole spectrum is 0.25 second. The Korean e-CALLISTO station was developed by Korea Astronomy and Space Science Institute (KASI) collaborating with Swiss Federal Institute of Technology Zurich (ETH Zurich) since 2007. In this paper, we report replacement of the tracking mount and development of the control program using Visual C++/MFC. The program can make the tracking mount track the Sun and schedule CALLISTO to start and to finish its observation automatically using the Solar Position Algorithm (SPA). Daily tracking errors (RMSE) are 0.0028 degree in azimuthal axis and 0.0019 degree in elevational axis between 2014 January and 2015 July. We expect that the program can save time and labor to make the observations of solar activity for space weather monitoring, and improve CALLISTO data quality due to the stable and precise tracking methods.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권4호
• /
• pp.252-259
• /
• 2012

Purpose: This study evaluated the postoperative stability of counter clockwise rotation of the mandibular plane in anterior openbite patients, who have had one jaw surgery performed. Methods: This study includes patients with skeletal class III malocclusion accompanied by anterior openbite among the patients who have had BSSRO performed, resulting in counter clockwise rotation of the mandibule. We excluded the patients with genioplasty and segmental surgery, and included 23 patients who underwent BSSRO. Results: We found no statistical significance between the amount of counter clockwise rotation in the mandible in the Pearson correlation test. Also, there was no significant difference between Group 1 (< $3^{\circ}$) and Group 2 (> $3^{\circ}$). Conclusion: This study evaluated the amount of horizontal relapse, and the degree of relapse. Stable results were obtained. Although there was no statistical significance between the degree of openbite and the amount of horizontal relapse, the group with a greater amount of openbite had a greater amount of relapse.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.759-772
• /
• 1994

Orthodontists have experienced the treatment of cases with three lower incisors. Occasionally a lower incisor was either congenitally missing or so seriously damaged by injury or disease that its removal presented the best prospect for the patient. Sometimes the intentional extraction of a lower incisor is needed to produce enhanced functional and esthetic results with minimal orthodontic manipulation. Such cases have unfavorable anterior tooth size discrepancies and present difficulties in achieving good occlusal results. However such difficulties can be overcome by the sensible diagnosis and treatment plan. Three different cases are presented and the conclusions are listed. 1. It is important for orthodontist who tries to treat three lower incisor cases to measure and calculate accurately the degree of deviation of tooth size and morphology and the anterior tooth size ratio. 2. A diagnostic setup model should be made to determine whether the incisor extraction is appropriate and space closure is needed or not. It is the best way to be sure that the occlusal results, including overbite and overjet, will be acceptable and how far the degree of midline deviation is. It also shows the amount of interproximal reduction to achieve an acceptable occlusal result. 3. The class I relationship between the upper canine and the lower one must be obtained to establish the canine rise during eccentric movement by the concept of mutually protective occlusion. It also helps to maintain the stable occlusal result.

• Journal of Mechanical Science and Technology
• /
• 제19권11호
• /
• pp.2032-2039
• /
• 2005

The lattice Boltzman method (LBM) and the finite difference-based lattice Boltzmann method (FDLBM) are quite recent approaches for simulating fluid flow, which have been proven as valid and efficient tools in a variety of complex flow problems. They are considered attractive alternatives to conventional finite-difference schemes because they recover the Navier-Stokes equations and are computationally more stable, and easily parallelizable. However, most models of the LBM or FDLBM are for incompressible fluids because of the simplicity of the structure of the model. Although some models for compressible thermal fluids have been introduced, these models are for monatomic gases, and suffer from the instability in calculations. A lattice BGK model based on a finite difference scheme with an internal degree of freedom is employed and it is shown that a diatomic gas such as air is successfully simulated. In this research we present a 2-dimensional edge tone to predict the frequency characteristics of discrete oscillations of a jet-edge feedback cycle by the FDLBM in which any specific heat ratio $\gamma$ can be chosen freely. The jet is chosen long enough in order to guarantee the parabolic velocity profile of a jet at the outlet, and the edge is of an angle of $\alpha$=23$^{o}$. At a stand-off distance w, the edge is inserted along the centerline of the jet, and a sinuous instability wave with real frequency is assumed to be created in the vicinity of the nozzle exit and to propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations resulting from periodic oscillation of the jet around the edge.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.151-162
• /
• 2017

In practical engineering, the friction damper is a widely used energy dissipation device because of its large deformation capacity, stable energy dissipation capability, and cost effectiveness. While based on conventional friction dampers, the double-sliding friction damper (DSFD) being proposed is different in that it features two sliding friction forces, i.e., small and large sliding friction forces, rather than a single-sliding friction force of ordinary friction dampers. The DSFD starts to deform when the force sustained exceeds the small-sliding friction force, and stops deforming when the deformation reaches a certain value. If the force sustained exceeds the large sliding friction force, it continues to deform. Such a double-sliding behavior is expected to endow structures equipped with the DSFD better performance in both small and large earthquakes. The configuration and working mechanism of the DSFD is described and analyzed. Quasi-static loading tests and finite element analyses were conducted to investigate its hysteretic behavior. Finally, time history analysis of the single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems were performed to investigate the seismic performance of DSFD-equipped structures. For the purpose of comparison, tests on systems equipped with conventional friction dampers were also performed. The proposed DSFD can be realized perfectly, and the DSFD-equipped structures provide better performances than those equipped with conventional friction dampers in terms of interstory drift and floor acceleration. In particular, for the MDOF system, the DSFD helps the structural system to have a uniform distributed interstory drift.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.324-324
• /
• 2017

Total 15 different corn hybrids, Kwangpyeongok, Gangdaok, Yanganok, Singwangok, Jangdaok, Cheonganok, Cheongdaok, Andaok, Dapyeongok, Pyeongkangok, Pyeonganok, Daanok, Sunwon P3394, Gangilok, P3394, had been used to investigate the plant growth and yield of corn hybrids depends on the sowing date. Sowing dates were April 5th, June 25th, and July 5th and all experiments had three repeats. The growth of Gangdaok was the best. However, in the case of Kwangpyeongok, the growth was not the best to compare with Gangdaok, but the stem to ear height ratio was lower than Gangdaok, it may be better for the stable cultivation. Both of the growth and yield of Daanok was not good regardless of planting date, but the yield and ear shape of Pyeongkangok and Dapyeongok were good for fresh corn. The growth and yield of 15 different corn hybrids were variable depends on the planting date, however, the growth degree days (GDD) was the most important factor for the maturity of the corn. More than $1500^{\circ}C$ of GDD was enough to harvest mature corn hybrids in the central region of Korea. Besides the yield and growth, other characters such as sweetness and taste as a food should be investigated further for the fresh corn to be suggested.