• 제목/요약/키워드: stable channel

검색결과 364건 처리시간 0.023초

예측 오류 필터를 이용한 블라인드 결정 궤환 등화기 추정 기법 (Blind Direct Decision Feedback Equalization using Prediction Error Filters)

  • 유화선;홍대식
    • 한국통신학회논문지
    • /
    • 제28권3C호
    • /
    • pp.279-285
    • /
    • 2003
  • 본 논문에서는 채널 추정 과정이 필요하지 않은 블라인드 결정 궤환 등화기를 제안하였다. 등화기 계수는 수신신호의 이차 통계 특성을 이용하여 직접 얻어진다. 최적화된 다단계 예측 오류 필터(PEF)의 출력은 채널의 부분응답과 송신 신호열의 곱으로 표현되기 때문에, 역방향 다단계 PEF는 블라인드 결정 궤환 등화기의 피드포워드필터 (FFF)로 사용될 수 있다. 또한 이에 따른 피드백 필터는 심볼율 부분 채널 응답을 통해서 얻어진다. 제안되는 기법은 정확한 채널의 길이를 알지 않아도 안정적인 성능을 가진다는 점에서 기존의 블라인드 채널 추정기법에 비해 장점을 가진다.

Effects of salmon carcass on forest and stream ecosystems, in Hokkaido, Japan -evidence by stable isotope analysis-

  • Yanai, Seiji;Kochi, Kaori
    • 한국환경과학회:학술대회논문집
    • /
    • 한국환경과학회 2003년도 International Symposium on Clean Environment
    • /
    • pp.198-203
    • /
    • 2003
  • The effects of salmon carcasses on forest and stream ecosystems were determined by nitrogen stable isotope analysis in natural streams in Hokkaido, Northern Japan, where numerous chum salmon (Oncoryhncus keta) were migrated upstream ITom ocean to spawn in autumn. The leaves and soils surrounding riparian forest and stream dwelling invertebrates were collected before and after migration. The nitrogen stable isotope ratio $({\delta}^{15}N)$ of riparian vegetation (Salix spp.) were different depending on the presence of salmon and distance from the stream. The $({\delta}^{15}N)$ of stream dwelling invertebrates were different between salmon present and absent stream. This difference was tested using the experiment channel by implanting salmon carcasses. The nitrogen stable isotope ratio of epilithic algae and leaf shredding animals were nearly 3 higher in the salmon implanted treatment suggesting that around 20% of salmon derived nitrogen was uptake either in algae and leaf shredding invertebrates. These results suggest that the salmon carcasses effects not only on stream primary production but also on primary consumers, which decompose leaves fertilized with nitrogen from carcasses.

  • PDF

원자층 증착 기술을 이용한 TiO2 활성층 기반 TFT 연구 (Study on the Thin-film Transistors Based on TiO2 Active-channel Using Atomic Layer Deposition Technique)

  • 김성진
    • 한국전기전자재료학회논문지
    • /
    • 제28권7호
    • /
    • pp.415-418
    • /
    • 2015
  • In this paper, $TiO_2$ based thin-film transistors (TFTs) were fabricated using by an atomic layer deposition with high aspect ratio and excellent step coverage. $TiO_2$ semiconducting layer was deposited showing a rutile phase through the rapid thermal annealing process, and exhibited TFT characteristics with a $200{\mu}m$ channel length of low-leakage currents (none of current flow during off-state), stable threshold voltages (-10 V ~ 0 V), and a much higher on/off current ratio (<$10^5$), respectively.

Cross-Layer Cooperative Scheduling Scheme for Multi-channel Hybrid Ubiquitous Sensor Networks

  • Zhong, Yingji;Yang, Qinghai;Kwak, Kyung-Sup;Yuan, Dongfeng
    • ETRI Journal
    • /
    • 제30권5호
    • /
    • pp.663-673
    • /
    • 2008
  • The multi-scenario topology of multi-channel hybrid ubiquitous sensor networks (USNs) is studied and a novel link auto-diversity cross-layer cooperative scheduling scheme is proposed in this paper. The proposed scheme integrates the attributes of the new performance evaluation link auto-diversity air-time metric and the topology space in the given multi-scenario. The proposed scheme is compared with other schemes, and its superiority is demonstrated through simulations. The simulation results show that relative energy consumption, link reception probability, and end-to-end blocking probability are improved. The addressing ratio of success with unchanged parameters and external information can be increased. The network can tolerate more hops to support reliable transportation when the proposed scheme is implemented. Moreover, the scheme can make the network stable. Therefore, the proposed scheme can enhance the average rate performance of the hybrid USN and stabilize the outage probability.

  • PDF

IMPROVING HABITAT OF FORMOSAN LANDLOCKED SALMON BY DAM REMOVAL

  • Yeh, Chao-Hsien;Lien, Hui-Pang
    • Water Engineering Research
    • /
    • 제6권4호
    • /
    • pp.149-159
    • /
    • 2005
  • With increasing recognition on conservation of endangered species in Taiwan, one of the major conservation projects is the habitat restoration of Formosan Landlocked Salmon which is major threatened by check dams in the channel for their blockading pathway to upstream and causing the problems of population isolation and close-blood mating. By creating an opening in the central dam body appropriately, partial removal dams can provide pathway for the fish for the better upstream channel habitat. Four check dams at Gau-Shan Creek were remodeled between April of 1999 and September of 2002 with information supported from model experiments under certain hydraulic condition of field environment. Based on the follow-up investigation, the channel morphology of observation sections is in stable condition and the total number of Formosan Landlocked Salmon in this creek increased promptly at the reach containing partial-removed dams.

  • PDF

SiGe/Si/SiGe Channel을 이용한 JFET의 전기적 특성 (Electrical Properties of JFET using SiGe/Si/SiGe Channel Structure)

  • 박병관;양현덕;최철종;김재연;심규환
    • 한국전기전자재료학회논문지
    • /
    • 제22권11호
    • /
    • pp.905-909
    • /
    • 2009
  • The new Junction Field Effect Transistors (JFETs) with Silicon-germanium (SiGe) layers is investigated. This structure uses SiGe layer to prevent out diffusion of boron in the channel region. In this paper, we report electrical properties of SiGe JFET measured under various design parameters influencing the performance of the device. Simulation results show that out diffusion of boron is reduced by the insertion SiGe layers. Because the SiGe layer acts as a barrier to prevent the spread of boron. This proposed JFET, regardless of changes in fabrication processes, accurate and stable cutoff voltage can be controlled. It is easy to maintain certain electrical characteristics to improve the yield of JFET devices.

Ti-6Al-4V 합금의 ECAP 가공시 미세 조직의 변화 연구 (Microstructural Evolution during the Equal Channel Angular Pressing of Ti-6Al-4V Alloy)

  • 고영건;정원식;신동혁;이종수
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.177-180
    • /
    • 2002
  • The effects of pressing temperatures on the formability and the microstructural evolution during equal channel angular pressing (ECAP) of lamellar Ti-6Al-4V alloy were investigated in this study. ECAP above isothermally 600$^{\circ}C$ was successful without producing any noticeable segments at the specimen surfaces after a single pass of pressing. After 4 passes of ECA pressing, lamellar microstructures were significantly refined revealing equiaxed grains of 0.3$\mu\textrm{m}$ in diameter consisting of high angle grain boundaries. Also these ultrafine grains were relatively stable with little grain growth when annealed up to 600$^{\circ}C$ for 1hour.

  • PDF

자동 2차경로 추정기법을 이용한 안정한 능동소음제어 (Stable Active Noise Control Using Auto-Secondary Path Estimation Techniques)

  • 남현도;서성대
    • 전기학회논문지
    • /
    • 제58권11호
    • /
    • pp.2299-2301
    • /
    • 2009
  • The adaptive IIR filters for active noise control systems are more effective when acoustic feedback exists, but the adaptive IIR filters could be unstable when the filter algorithm is not yet converged. In this paper, auto-secondary path estimation techniques and a stabilizing process for adaptive Multi-Channel Recursive LMS (MCRLMS) filters are developed to improve the stability of multi-channel active noise control systems. Experiments using a TMS320VC33 digital signal processor in a three dimensional enclosure have performed to show the effectiveness of the proposed algorithm.

CDMA 역방향 링크에서 OPEN LOOP 전력제어 알고리즘 분석 (Analysis of OPEN LOOP Power Control in CDMA Reverse Link)

  • 이철희;박종안
    • 한국통신학회논문지
    • /
    • 제22권4호
    • /
    • pp.804-811
    • /
    • 1997
  • In the CDMA mobile communication system, reverse power control can be used to minimize the interference level for a good quality of the voice channel, and used to maxmize the system capacity. In this paper, we have analyed the environment of the K-parameter and the access procedure for the mobile station, and proposed a new algorithm for the access probe procedure of the station. K-parameter is determined according to the environment of the base station and access probe can adaptively control the power according to the position changes of the mobile station or the rapid and various state changes of the channel. Simulation results in the limited test environment show that it can increase the system capacity and decrease the power comsumption of the mobile station while maintaining the good and stable quality of the voice channel.

  • PDF

Ti-6AI-4V 합금의 ECAP 가공에 따른 미세조직의 변화 (Microstructural Evolution during the Equal Channel Angular Pressing of Ti-6Al-4V Alloy)

  • 고영건;정원식;신동혁;이종수
    • 소성∙가공
    • /
    • 제11권6호
    • /
    • pp.519-528
    • /
    • 2002
  • The microstructural evolution during the equal channel angular pressing of Ti-6Al-4V alloy was investigated using the transmission electron microscopy (TEM). ECA pressing was carried out isothermally with route C at $600^{\circ}C$ for two types of initial microstructure, i.e., equiaxed and Widmanstatten microstructures. At an initial stage of ECA pressing, the equiaxed microstructure showed more uniform flow than the Widmanstatten microstructure. However, both microstructures were significantly refined revealing nearly equiaxed grains of 0.3$mu extrm{m}$ in diameter with high angle grain boundaries after 4 passes of ECA pressing. These ultrafine gains were found to be stable with little grain growth, when annealed up to $600^{\circ}C$ for 1hr.