• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.282-290
• /
• 2006

In this paper, we propose an enhanced Timing Estimator algorithm for 2.45GHz LR-WPAN receiver. Because an expensive and highly efficient oscillator can't be used for low-cost implementation, a Timing Estimator algorithm having stable operation in the channel environment with center frequency tolerance of 80 ppm is required. To enhance the robustness to frequency offset and the stability of receiver performance, multiple delay differential filter is adopted. By utilizing the characteristic that the correlation result between the output signal of Multiple delay differential filter and reference signal is restricted on the In-phase part of the correlator output, a coherent detection scheme instead of the typical noncoherent one is adopted for Timing Estimator. The application of the coherent detection scheme is suitable for LR-WPAN receiver aimed at low-cost, low-power, and low-complexity, since it can remove performance degradation due to squaring loss of I/Q squaring operation and decrease implementation complexity. Computer simulation results show that the proposed algorithm achieved performance improvement compared with the differential detection-based noncoherent scheme by 2dB in average.

• Journal of Convergence for Information Technology
• /
• v.9 no.3
• /
• pp.8-15
• /
• 2019

Recently, the importance of pre-shipment quality inspection has been emphasized due to the increase of STB supply. In this paper, we propose a method to support automation of quality inspection through simultaneous multi-channel input of STB video signal. The proposed method extracts a fingerprint using the center scan line of the image after stable video shot boundary detection using CeLDP combining color information and LDP code and performs synchronization between input video channels. The proposed method shows stronger shot boundary detection performance than the conventional shot detection method. Through the experiments applied to the real environment, it is possible to secure reliability and real-time quality check for synchronization between multi-channel inputs required for STB quality inspection. Also, based on the proposed method, we intend to study a large-scale quality inspection method in the future and propose a more effective quality inspection system.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.2
• /
• pp.152-161
• /
• 2023

Vanadium redox flow batteries (VRFBs) have been considered one of promising power sources for large scale energy storage systems (ESS) because of their excellent cycle performance and good safety. However, VRFBs still have a few challenging issues, such as poor Coulombic efficiency due to vanadium crossover between catholyte and anolyte, although recent efforts have shown promise in electrochemical performance. Herein, the vanadium complexes with various glyme ligands have been examined as active materials to suppress vanadium crossover between catholyte and anolyte, thus improving the Coulombic efficiency of VRFBs. The conventional Nafion membrane has a channel size of ca. 10 Å, whereas vanadium cation species are small compared to the Nafion membrane channel. For this reason, vanadium cations can permeate through the Nafion membrane, resulting in significant vanadium crossover during cycling, although the Nafion membrane is a kind of ion-selective membrane. In this regard, various glyme additives, such as 1,2-dimethoxyethane (monoglyme), diethylene glycol dimethyl ether (diglyme), and tetraethylene glycol dimethyl ether (tetraglyme) have been examined as complexing agents for vanadium cations to increase the size of vanadium-ligand complexes in electrolytes. Since the size of vanadium-glyme complexes is proportional to the chain length of glymes, the vanadium permeability of the Nafion membrane decreases with increasing the chain length of glymes. As a result, the vanadium complexes with tetraglyme shows the excellent electrochemical performance of VRFBs, such as stable capacity retention (90.4% after 100 cycles) and high Coulombic efficiency (98.2% over 100 cycles).

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.1
• /
• pp.46-51
• /
• 2024

Drone was first used for military purposes but as the range of use has recently expanded. It is being widely used in various industrial fields such as agriculture, service, logistics, and leisure. Lithium polymer batteries are lightweight and highly efficient, so they are mainly used as power supplies for drones. Accordingly, the need for lightweight and high energy density lithium polymer batteries has increased in order to supply stable power to drone. However, lithium polymer batteries can lead to ignition and explosion due to overcharging, short circuit, etc., so they must be used with a protective circuit installed. The protection circuit consists of a protection IC that monitors the voltage of the lithium polymer battery and a dual N-channel MOSFET that acts as a switch in case of overcharge and overdischarge. Therefore, this paper was implemented in one package form using a battery protection IC and a MOSFET semiconductor die chip serving as a switch. When implemented as a one chip package IC, at least 67% of savings compared to existing parts can be achieved.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.573-580
• /
• 2000

MPT, which has been developed recently, is very tolerant to aqueous samples. Several types of MPT have been investigated and is found that the double concentric tube could sustain a stable plasma at a low plasma gas flow rate. However, the tip of torch is easily ruined. Triple concentric torch has shown the best stability and the plasma shape, much like that of ICP, especially when the central channel is quartz. The plasma is exposed and mixed with air as is suggested from the background spectrum, which leads to quenching of He MPT. Sensitivity of helium MPT equipped with a membrane desolvator has shown 10 times lower than that of Argon MPT for most of elements except for the ones with relatively high excitation energy. He MPT requires small plasma flow rate (about 1.6 L/min), stable and simple to use. Excitational temperature and electron number density measured are 4950 K and 3.28 ${\times}$ $10^{14}cm^{-3}$, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.14-14
• /
• 2017

안정하도란 하도형성유량이 발생하는 조건에 대해 단면내에서 발생하는 유사량과 유입되는 유사량이 평형상태를 유지하는 단면을 의미하며, 안정하도 평가 및 설계란 현재 단면을 안정하도 단면과 비교하여 평가하거나 안정하도를 만족하는 하상경사와 하폭, 수심을 도출하는 과정을 의미한다. 이러한 안정하도 평가 및 설계는 하천을 정비하거나 복원하는 과정에서 장기적인 하상 평형상태를 고려하기 위해 적용할 수 있으며, 하상 침식 혹은 퇴적에 대해 지점별 평가방법으로 활용 할 수 있다. 안정하도 단면은 상류에서 유입되는 유사량과 대상구간의 발생 유사량의 평형조건에 의해 결정되기 때문에 유입되는 유사량 자료의 정확성과 대상구간 발생 유사량 산정의 정확도가 전체 평가 결과의 신뢰도에 가장 중요한 요소로 작용한다. 그러나 현재까지 활용되어 온 안정하도 단면 계산 방법의 경우 대상구간 발생 유사량 결정을 위한 유사이송공식의 선택이 특정 공식으로 한정되어있어 국내 하상과 적합한 유사이송공식의 적용이 매우 제한적이었다. 따라서 본 연구에서는 이러한 기존의 안정하도 평가 및 설계 방법을 개선하기 위해 다양한 유사이송공식의 적용이 가능한 안정하도 평가 모델의 알고리즘을 제시하였으며, 관련 분야의 실무자가 쉽게 활용 할 수 있도록 사용자 친화적인 사용자 친화적인 안정하도 평가 및 설계 프로그램(Stable Channel Analysis and Design, SCAD)을 개발하였다. 본 연구에서는 기존의 안정하도 단면 계산 방법인 Copeland 방법을 분석하여 새로운 알고리즘을 개발하였으며, 단면 유사량 분석 계산과정에서 자갈하상 공식을 포함한 총 다섯 가지의 유사이송공식을 새롭게 추가하였다. 개발된 SCAD 프로그램은 정확도 및 적용성 향상을 위해 청미천과 내성천 모래하상 구간 그리고 원주천 자갈하상 구간에 대해 시험계산을 수행하였고 평가 결과를 프로그램 개선을 위해 적극 활용하였다. 또한 웹 포팅 프로그램 구축을 통해 다양한 사용자가 특정 웹사이트에서 프로그램에 쉽게 접근할 수 있도록 하였다. 본 연구에서는 개선된 안정하도 평가 및 설계 프로그램을 활용하여 다양한 유사이송공식 선택에 따른 안정하도 산정 결과 값의 변화를 분석하고 그 범위를 정량적으로 제시하였다.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.83-89
• /
• 2018

The significant sedimentation at the estuary in the eastern coast of Korea frequently causes river mouth occlusion where disconnection between the river and sea is observed. River mouth occlusion causing watershed retention raises the environmental risk of the area as it impairs water quality and threatens the area's safety in the event of floods. This study proposes a plan to maintain stability of river channel and flow of flood discharge at the estuary with loss of its function for disaster prevention. To this end, the study tries to change the location and width of stream path, focusing on the center line of stream near the sand bar of river mouth. This allows to identify a shape of stream path that leads the most stable flow. To review the result, this study uses the SRH-2D, a model for two-dimensional hydraulic analysis, and conduct numeric simulation. The simulation result showed that the most effective plan for maintaining the stable flow of running water without having the area sensitive to changes in hydraulic characteristics is to lower the overall river bed height of the sand bar near the center line of stream to a equal level.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1062-1070
• /
• 2022

In the present communication, pure and stable α-Bismuth Oxide (Bi₂O₃) nanoparticles (NPs) were synthesized by low temperature solution combustion method using urea as a fuel and calcined at 500℃. The synthesized sample was characterized by using powder X-ray Diffraction (PXRD), Scanning Electron Microscopy (SEM), Energy dispersive X-ray analysis (EDAX), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and UV-Visible absorption spectroscopy. The PXRD pattern confirms the formation of mono-clinic, stable and low temperature phase α-Bi₂O₃. The direct optical energy band gap was estimated by using Wood and Tauc's relation which was found to be 2.81 eV. The characterized sample was studied for X-ray/gamma ray shielding properties in the energy range 0.081-1.332 MeV using NaI (Tl) detector and multi channel analyzer (MCA). The measured shielding parameters agrees well with the theory, whereas, slight deviation up to 20% is observed below 356 keV. This deviation is mainly due to the influence of atomic size of the target medium. Furthermore an accurate theory is necessary to explain the interaction of X-ray/gamma ray with the NPs.The present work opens new window to use this facile, economical, efficient, low temperature method to synthesize nanomaterials for X-ray/gamma ray shielding purpose.

• Korean Journal of Environment and Ecology
• /
• v.26 no.6
• /
• pp.884-891
• /
• 2012

The characteristic of fish fauna and distribution by habitat type in the Yanghwa stream were investigated from August, 2008 to June, 2009. During the surveyed period, 30 species belonging 8 families were collected. And there were 10 Korea endemic species(33.3%), including Rhodeus uyekii et and so on. Dominant species was Rhodeus notatus, and subdominant species was Pseudorasbora parva. Dominant species according to habitat type was Pseudorasbora parva in Dam type pool and Channel conected pool, Pseudogobio esocinus(Run), Zacco platypus(Riffle), Rhodeus notatus(Side channel and Substrate type pool), Squalidus gracilis majimae(Meander type pool), and Carassius auratus(Channel unconnected pool), respectively. As a results of community analysis in the Yanghwa Stream, diversity, richness, and abundance indices showed relatively high values, indicating that studied stream have relatively stable community structure. Moreover, cluster and principal component analysis were divided by two groups(lotic and lentic habitats), suggest that species and individuals were different among habitat types.

• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.245-254
• /
• 1995

The density of ATP-sensitive potassium($K_{APT}$) channels, that open as intracellular ATP concentration falls below a critical level, is very high in skeletal muscle surface membrane and those high density may imply that $K_{ATP}$ channels have very important physiological roles. To elucidate a role of $K_{ATP}$ in relation to fatigue, the modulating effects of potassium channel openers and blockers on the fatigue velocity(FV) of mouse extensor hallucis longus muscle(EHL) were investigated in vitro. Twitch contraction was induced by an electrical field stimulation (EFS: 24-48V, 20ms, 0.2-4Hz) and resulting contraction force was isometrically recorded. The twitch forces were gradually decreased to 25% of initial contraction force(ICF) in $37.52{\pm}1.55sec$($mean{\pm}s.e.m.$, n=135), indicating the fatigue phenomena. The mean velocity for development of the fatigue was measured during the period that twitch force decreased to half($FV_{0/0.5}$) and during the period from half to 25%($FV_{0.5/0.25}$) of ICF. The fatigue was induced once every one hour and the tissue response was stable for up to 4 hours. In control condition, ICF was $5.8{\pm}0.12g$ (n=144) and decreased to 50% of ICF with the mean fatigue velocity of $0.182{\pm}0.006g/sec$($FV_{0/0.5}$, n=135) and from 50% to 25% of ICF with $0.084{\pm}0.004g/sec$($FV_{0.5/0.25}$, n=135). Cromakalim($50{\mu}M$) significantly increased $FV_{0.5/0.25}$(n=4). Glibenclamide($IC_{50}>50{\mu}M$), $Ba^{2+}$($IC_{50}=10{\mu}M$), 4-aminopyridine($FV_{0/0.5}$, $IC_{50}=0.5mM$; $FV_{0.5/0.25}$, $IC_{50}=2mM$) decreased both $FV_{0/0.5}$ and $FV_{0.5/0.25}$ concentration-dependently up to 75%. $TEA^+$(30mM), E-4031($10{\mu}M$), tolbutamide(1mM) decreased $FV_{0.5/0.25}$, but apamin(300nM) and $TEA^+$(10mM) showed no significant effects. Our results suggest that activation of the $K_{ATP}$ channels may be major cause of $K^+$ outflux during development of the fatigue and the isolated EHL muscle could be an useful experimental preparation in studying the fatigue phenomena in skeletal muscle. In addition, the possibility of activation of delayed rectifier during the fatigue development remains to be studied further.