• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1093-1100
• /
• 2018

Fast progress in miniaturization and reducing power consumption of semiconductors for wearable devices makes it possible to develop extremely small wearable systems for various application services. This results recent wearable applications to be powered from extremely low-power energy harvesters based on solar, piezo, and TENG sources. In most cases, the harvesters generate power in non-linear manner. Therefore, we implemented and experimented the device platforms to utilize natural frequency of around 3Hz. We also designed two-stage power storages and high efficiency conversion platform to consider such non-linear power harvesting sources. The experiment showed power generation of about 4.67mW/min from these non-linear sources with provision of stable energy storages.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.468-480
• /
• 1993

In this paper, at first, the characteristics of double mode SAW (DMS) resonator are analysed by applying the wave guide model and coupled mode theory to 1-port resonator. The DMS resonators (2-pole), which are arranged in a close, parallel configuration of two identical 1-port resonators on a single plate, and 4-pole DMS filters are designed and fabricated at the center frequency of 150.15 MHz with 3-dB bandwidth of 80 KHz. The empirical design characteristics are obtained from the comparison of experimental and theoretical values resulted from several fabrications, and the narrow bandpass filters are implemented on the basis of the above empirical results, which can be used to mobile communication systems. A ST-cut quartz substrate is selected for the stable temperature-frequence characteristics, and high resolution photolithography is applied to the fabrication of filter to get the fine electrode patterns.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.6
• /
• pp.73-83
• /
• 2020

Agricultural drought is a natural phenomenon that is difficult to observe and quantitatively express, and agricultural water use is high and usage patterns are diverse, so even if there is a lack of rainfall. The frequency and severity of agricultural drought are increased during the irrigation period where the demand for agricultural water is generated, and reasonable and efficient management of agricultural water for stable water supply is required. As one method to solve the water shortage of agricultural water in an unstructured method, it is necessary to analyze the appropriate supply amount and supply method through simulation from the intake works to the canals organization and paddy field. In this study, irrigation efficiency was analyzed for irrigation systems from April to September over the past three years from the Musu Reservoir located in Jincheon-gun, Chungcheongbuk-do and Pungjeon Reservoir located in Seosan-si, Chungcheongnam-do. SWMM (Storm Water Management Model) was used to collect agricultural water, and irrigation efficiency analysis was conducted using adequacy indicators, and water supply vulnerability. The results of the agricultural water distribution simulation, irrigation efficiency and water supply vulnerability assessment are thought to help the overall understanding of the agricultural water supply and the efficient water management through preliminary analysis of the methods of agricultural water supply in case of drought events.

• Journal of Trauma and Injury
• /
• v.22 no.1
• /
• pp.77-86
• /
• 2009

Purpose: The appropriate management of traumatic truncal arterial injury is often difficult to determine, particularly if the injury is associated with severe additional truncal lesions. The timing of repair is controversial when patients arrive alive at the hospital. Also, there is an argument about surgery versus stent-graft repair. This study's objective was to evaluate the appropriate method and the timing for treatment in cases of truncal abdominal injury associated with other abdominal lesions. Methods: The medical records at Ajou University Medical Center were reviewed for an 8-year period from January 1, 2001, to December 31, 2008. Twelve consecutive patients, who were diagnosed as having had a traumatic truncal arterial injury, were enrolled in our study. Patients who were dead before arriving at the hospital or were not associated with abdominal organ injury, were excluded. All patients involved were managed by using the ATLS (Advanced Trauma Life Support) guideline. Data on injury site, the timing and treatment method of repair, the overall complications, and the survival rate were collected and analyzed. Results: Every case showed a severe injury of more than 15 point on the ISS (injury severity score) scale. The male-to-female ratio was 9:3, and patients were 41 years old on the average. Sites of associated organ injury were the lung, spleen, bowel, liver, pelvic bone, kidney, heart, vertebra, pancreas, and diaphragm ordered from high frequency to lower frequency. There were 11 cases of surgery, and one case of conservative treatment. Two of the patients died after surgery for truncal organ injury: one from excessive bleeding after surgery and the other from multiple organ failure. Arterial injuries were diagnosed by using computed tomography in every case and 9 patients were treated by using an angiographic stent-graft repair. There were 3 patients whose vessels were normal on admission. Several weeks later, they were diagnosed as having a truncal arterial injury. Conclusion: In stable rupture of the truncal artery, initial conservative management is safe and allows management of the major associated lesions. Stent grafting of the truncal artery is a valuable therapeutic alternative to surgical repair, especially in patients considered to be a high risk for a conventional thoracotomy.

• Journal of Plant Biotechnology
• /
• v.33 no.4
• /
• pp.297-302
• /
• 2006

In general, the proliferation of orchids via somatic embryos has been used for mass production of somatic clones because of high propagation efficiency. In spite of high propagation rate, this method often brings somaclonal variation, especially polyploid frequency. Therefor we here concentrated to investigate the relationship between endopolyploidization patterns of explants and the occurrence of tetraploid variant in clonally proliferated Doritaenopsis via somatic embryo regeneration system. In the fully developed somatic embryo, upper part contained 2C to 16C while middle and lower parts showed 2C to 32C DNA content. Two-week-old embryo contained 2C to 16C, whereas those regenerated after 4 to 10-week-old contained 2C to 64C nuclei. Results showed that endoreduplication was variable depending upon tissue types, ages, and parts in one species. lower part of somatic embryo having high endoreduplication degree increased the regeneration of tetraploid variants by about 3-fold comparing to upper part of somatic embryo culture. polyploid frequency occurrence might be closely related to the high levels of endoreduplication of somatic embryos used as explant. It suggested that the upper part of somatic embryo having comparatively low endoreduplication degree is suitable for the stable in vitro propagation system.

• Economic and Environmental Geology
• /
• v.52 no.4
• /
• pp.299-312
• /
• 2019

This study analyzed variation of tidal channels associated with Shihwa reclamation project for corresponding observation period based on remote sensing approaches. The project period was subdivided to developing period, closed period, and open period based on developing and management plan of Shiwa lake, and number, length, width, and direction of tidal channels for each period were analyzed using CORONA, Landsat 5 TM, Landsat 7 ETM+, and orthorectified aerial photographs. Number of tidal channels decreased from developing to opening period while $3^{rd}$ order channles did not show noticeable changes. The length of tidal channels decreased during developing to closed period, and increasing trend of $2^{nd}$ and $3^{rd}$ order channels was observed for the opening period. The average widtrh of $2^{nd}$ and $3^{rd}$ order channels decreased from developing to closed period, and increased during open period. The direction of tidal channels showed NW and NE direction in general, while the rose diagram showed deacrased frequency of NE direction and increased frequency of NW direction during the open period. These variations in tidal channels are considered to be related to changes in tidal energy environment, where stable energy environment before the project was changed to disconnection of tidal energy by closed environment, and re-connection of the energy during the open period.

• Journal of Biomedical Engineering Research
• /
• v.28 no.5
• /
• pp.590-600
• /
• 2007

We performed experimental studies on the muscle activities in the lower limbs for the different movement patterns on an unstable platform. A training system for postural control using an unstable platform that we previously developed was applied for the experiments. This unstable platform provides 360 degrees of movement allowing for training of posture in various directions and provides simultaneous excitations to visual sensory, somatic sensation and vestibular organs. Compare with the stable platform, keeping body balance on the unstable platform requests more effective sensation from vision, vestibular sense and somatic sense. Especially, the somatosensory inputs from the muscle proprioceptors and muscle force are crucial. To study the muscle activities for the different movement patterns and find the best training method for improving the ability of postural control through training and improving the lower extremity muscular strength, fifteen young healthy participants went through trainings and experiments. The participants were instructed to move the center of pressure following the appointed movement pattern while standing on the unstable platform. The electromyographies of the muscles in the lower limbs were recorded and analyzed in the time and the frequency domain. Our experimental results showed the significant differences in muscle activities for the different movement patterns. Especially, the spectral energy of electromyography signals in muscle for the movement pattern in anterior-posterior direction was significantly higher than those occurred in the other patterns. The muscles in the lower leg, especially tibialis anterior and gastrocnemius were more activated compared to the others for controlling the balance of body on the unstable platform. The experimental results suggest that, through the choice of different movement pattern, the training for lower extremity strength could be performed on specific muscles in different intensity. And, the ability of postural control could be improved by the training for lower extremity strength.

• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.44-51
• /
• 2019

The paper presents the rotordynamic performance measurements and model predictions of a fuel cell electric vehicle (FCEV) air compressor supported on gas foil bearings (GFBs). The rotor has an impeller on one end and a thrust runner on the other end. The front (impeller side) and rear (thrust side) gas foil journal bearings (GFJBs) are located between the impeller and thrust runner to support the radial loads, and a pair of gas foil thrust bearings are located on both sides of the thrust runner to support the axial loads. The test GFJBs have a partial arc shim foil installed between the top foil and bump strip layers to enhance hydrodynamic pressure generation. During the rotordynamic performance tests, two sets of orthogonally installed eddy-current displacement sensors measure the rotor radial motions at the rotor impeller and thrust ends. A series of speed-up and coast-down tests to 100k rpm demonstrates the dominant synchronous (1X) rotor responses to imbalance masses without noticeable subsynchronous motions, which indicates a rotordynamically stable rotor-GFB system. Finite element analysis of the rotor determines the rotor free-free (bending) natural modes and frequencies well beyond the maximum rotating frequency. The predicted damped natural frequencies and damping ratios of the rotor-GFB system reveal rotordynamic stability over the speeds of interest. The imbalance response predictions show that the predicted critical speeds and rotor amplitudes strongly agree with the test measurements, thus validating the developed rotordynamic model.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.180-193
• /
• 2021

The complex resistivity method is an exploration technique that can obtain various characteristic information of underground media by measuring resistivity and phase in the frequency domain, and its utilization has recently increased. In this paper, a three-dimensional inversion algorithm for the CR data was developed to increase the utilization of this method. The Poisson equation, which can be applied when the electromagnetic coupling effect is ignored, was applied to the modeling, and the inversion algorithm was developed by modifying the existing algorithm by adopting comlex variables. In order to increase the stability of the inversion, a technique was introduced to automatically adjust the Lagrangian multiplier according to the ratio of the error vector and the model update vector. Furthermore, to compensate for the loss of data due to noisy phase data, a two-step inversion method that conducts inversion iterations using only resistivity data in the beginning and both of resistivity and phase data in the second half was developed. As a result of the experiment for the synthetic data, stable inversion results were obtained, and the validity to real data was also confirmed by applying the developed 3D inversion algorithm to the analysis of field data acquired near a hydrothermal mine.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.254-261
• /
• 2024

Accurate guidance during landing and take-off is important, and instrument landing system (ILS) has been used for stability and verification. Regular inspections are conducted for stable operation, and there is research to perform inspection using drones in addition to ground vehicles and measurement aircraft. Using SDR and single board computer, which can receive wide frequency range, we designed a small system that receives and processes localizer signals through GNU Radio. To check signal processing characteristics through GNU Radio, we simulated with MATLAB Simulink and confirmed the theoretical values. Difference in depth of modulation (DDM) and approach angle can be calculated when the aircraft enters the runway. And GNU Radio implemented real-time signal processing wirelessly using transmission control protocol (TCP). This gives the results within the error of 0.5% when the aircraft entered the runway center line and 0.27% for the angle of 1° degree. Compared to the inspecting and maintaining ILS signals using aircraft or ground vehicles, it is possible to implement a receiving system using small SDR that can be mounted for drone.