• 제목/요약/키워드: stability phase diagram

검색결과 45건 처리시간 0.033초

Microstructure Change and Mechanical Properties in Binary Ti-Al Containing Ti3Al

  • Oh, Chang-Sup;Woo, Sang-Woo;Han, Chang-Suk
    • 한국재료학회지
    • /
    • 제26권12호
    • /
    • pp.709-713
    • /
    • 2016
  • Grain morphology, phase stability and mechanical properties in binary Ti-Al alloys containing 43-52 mo1% Al have been investigated. Isothermal forging was used to control the grain sizes of these alloys in the range of 5 to $350{\mu}m$. Grain morphology and volume fraction of ${\alpha}_2$ phase were observed by optical metallography and scanning electron microscopy. Compressive properties were evaluated at room temperature, 1070 K, and 1270 K in an argon atmosphere. Work hardening is significant at room temperature, but it hardly took place at 1070 K and 1270 K because of dynamical recrystallization. The grain morphologies were determined as functions of aluminum content and processing conditions. The transus curve of ${\alpha}$ and ${\alpha}+{\gamma}$ shifted more to the aluminum-rich side than was the case in McCullough's phase diagram. Flow stress at room temperature depends strongly on the volume fraction of the ${\alpha}_2$ phase and the grain size, whereas flow stress at 1070 K is insensitive to the alloy composition or the grain size, and flow stress at 1270 K depends mainly on the grain size. The ${\alpha}_2$ phase in the alloys does not increase the proof stress at high temperatures. These observations indicate that improvement of both the proof stress at high temperature and the room temperature ductility should be achieved to obtain slightly Ti-rich TiAl base alloys.

Design of Gain Controller of Decoupling Control of Grid-connected Inverter with LCL Filter

  • Windarko, Novie Ayub;Lee, Jin-Mok;Choi, Jae-Ho
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 추계학술대회 논문집
    • /
    • pp.124-126
    • /
    • 2008
  • Grid Connected inverter is produced current to deliver power to grid. To provide low THD current, LCL filters is effective to filter high frequency component of current output from inverter. To provide sinusoidal waveform, there are many researchers have been proposed several controllers for grid-connected inverter controllers. Synchronous Reference Frame (SRF)-based controller is the most popular methods. SRF-based controller is capable for reducing both of zero-steady state error and phase delay. But SRF based controller is contained cross-coupling components, which generate some difficulties to analyze. In this paper, SRF based controller is analyzed. By applying decoupling control, cross-coupling component is eliminated and single phase model of the system is obtained. Through this single phase model, gain controller is designed. To reduce steady state error, proportional gain is set as high as possible, but it may produce instability. To compromise between a minimum steady state error and stability, the single phase model is evaluate through Root Locus and Bode diagram. PSIM simulation is used to verify the analysis.

  • PDF

안정성이 우수한 신남알데히드 자가미세유화 약물전달시스템 개발 (Development of trans-cinnamaldehyde self-microemulsifying drug delivery system(SMEDDS) with superior stability)

  • 방규호;김경수
    • 한국산학기술학회논문지
    • /
    • 제20권12호
    • /
    • pp.555-562
    • /
    • 2019
  • 본 연구의 목적은 다양한 항균활성을 지닌 천연물 유래 물질 신남알데히드를 이용한 안정한 자가미세유화 약물전달시스템을 개발하는 것이다. 이러한 목표를 달성하기 위하여 신남알데히드의 주 분해산물인 신남산과 신남알데히드의 동시 정량법을 확립하였으며, 설정된 분석법을 이용한 용해도 시험으로 신남알데히드에 대한 용해도 개선효과가 우수한 계면활성제를 선별하였다. 계면활성제로 Cremophor EL, 공계면활성제로 Transcutol P를 이용한 신남알데히드의 pseudo-ternary phase diagram을 작성하여 에멀전의 입자크기를 최소화시킬 수 있는 조성비로 신남알데히드 : Cremophor EL : Trasncutol P = 10 : 70 : 20%(v/v/v)인 SMEDDS 조성물을 제조한 후 안정성 시험을 통해 신남알데히드의 함량변화 및 에멀전의 입자크기 변화에 대해 확인하였다. 본 연구를 통해 제조된 신남알데히드의 자가유화 나노에멀전은 신남산의 생성량이 적고 신남알데히드의 함량 저하 속도가 느려 안정성이 우수하였으며, 안정성 기간 중에 최초의 입자크기를 잘 유지하는 특성이 확인되었다. 따라서 이 조성물은 신남알데히드를 위한 의약품 제형으로의 활용 가능성이 높을 것으로 사료된다.

Development of Propofol-Ioaded Microemulsion Systems for Parenteral Delivery

  • Ryoo Hyun-Ki;Park Chun-Woong;Chi Sang-Cheol;Park Eun-Seok
    • Archives of Pharmacal Research
    • /
    • 제28권12호
    • /
    • pp.1400-1404
    • /
    • 2005
  • The aim of the present study was to develop the aqueous parenteral formulation containing propofol using o/w microemulsion systems. Propofol itself was chosen as the oil phase and its content was fixed to 1$\%$, w/w. Pseudoternary phase diagrams were constructed to obtain the concentration range of surfactant and cosurfacatnt and the optimum ratio between them for microemulsion formation. Consequently, the suitability of the chosen microemulsion system as a parenteral formulation was evaluated from the stability and hemolysis tests on that. Among the surfactants and cosurfactants screened, the mixture of Solutol HS 15-ethyl alcohol (5/1) showed the largest o/w mocroemulsion region in the phase diagram. When 1 $\%$ (w/w) of propofol was solubilized with 8$\%$ (w/w) of Solutol $HS^{circledR}$??? 15-ethyl alcohol (5/1), the average droplet size (150 nm) and the content of propofol in the systems were not significantly changed at 40$^{circ}C$ for 8 weeks. The hemolysis test showed that this formulation was nontoxic to red blood cells. In conclusion, propofol was successfully solubilized with the o/w microemulsion systems.

고온-고압하에서 티탄철석에 대한 상면이 연구 (Phase Transition Study on Ilmenite under High Pressure and Temperature)

  • Kim, Young-Ho
    • 한국광물학회지
    • /
    • 제15권3호
    • /
    • pp.161-169
    • /
    • 2002
  • 고온-고압 상태에서 티탄철석 ($FeTiO_3$)의 상변이에 대한 연구가 있었으나, 그 결과는 서로 일치하지 않고 있다. 특히, 티탄철석상과 페롭스카이트상의 상변이 경계는 담금방법에 의해 결정된 것으로 신뢰도에 의문이 제기되고 있다. 이러한 문제를 해결하기 위해, 고온-고압 현장상태에서 라지 볼륨 기기와 방사광을 이용하여 19 GPa와 $700^{\circ}C$의 범위에서 X선 회절실험을 시행하였다. 이러한 실험결과, 페롭스카이트상은 상온에서 16 CPa 이상의 압력에서 안정하며, 15 CPa 근처에서 $LiNbO_3$상으로 변이한다. 또한 이 두 고온-고압상은 $500^{\circ}C$에서는 순간적인 상변이를 하고 있다. $LiNbO_3$상은 각각 13 CPa 및 300'E와 10.8 GPa 및 400'E에서 티탄철석상으로 상변이 한다. 따라서 본 실험결과는 $LiNbO_3$상은 고온-고압하에서 안정 영역을 확보하고 있으며, 페롭스카이트-티탄철석상경계는 이전에 발표된 결과와는 매우 다르다는 것을 지시해주고 있다.

부산 해운대지역 지하수와 지열수의 수리화학적 특성 (Hydrochemical characteristics of ground and geothermal waters in the Haeundae hot-spring area, Pusan, Korea)

  • 심형수;함세영;성익환;이병대;조병욱;황진연
    • 한국환경과학회지
    • /
    • 제9권3호
    • /
    • pp.241-252
    • /
    • 2000
  • Twenty-two water samples(fifteen groundwater and seven geothermal water samples) were collected to elucidate chemical characteristics of the ground and geothermal waters in the Haeundae hot spring area and its vicinity. Major and honor elements were analyzed for ground and geothermal water samples. The concentrations of $K^+$, Na+$, $Ca^{2+}$, $SO_4^{2-}$, $Cl^-$, ^F^-$ and $SiO_2$ were higher in the geothermal water samples than the groundwater samples except $HCO_3^- and Mg^{2+}$ ions. Based on the contents of Fe, Zn, Cu, Al, Mn and Pb, some of the ground and geothermal water samples are contaminated by anthropogenic sources. The ground waters shown on the Piper diagram belong to $Ca-HCO_3$ type, while the geothermal waters Na-Cl type. The graphs of $Cl^-$ versus $Na^+$, $Ca^{2+}, Mg^{2+}, K^+, SO_4^{2-} and HCO_3^-$ indicate that the groundwater is related partly with mineral-water reaction and partly with anthropogenic contamination, while the geothermal water is related with saline water. On the phase stability diagram, groundwater and thermal water mostly fall in the field of stability of kaolinite. This indicates that the ground and geothermal waters proceed with forming kaolinite. Factor and correlation analyses were carried out to simplify the physicochemical data into grouping some factors and to find interaction between them. Based on the Na-K, Na-K-Ca and Na-K-Ca-Mg geothermometers and silica geothermometers, the geothermal reservoir is estimated to have equilibrium temperature between 125${$\mid$circ}C$ and 160${$\mid$circ}C$.

  • PDF

Octyldiinethyl p-aminobenzoate와 \brta -Cyclodextrin$의 포접화합물에 관한 연구 (A Study on the Inclusion Complexation of Octyldimethyl p-aminobengoate with \brta -Cyclodextrin$)

  • 이창학;소부영;김영수
    • 대한화장품학회지
    • /
    • 제15권1호
    • /
    • pp.51-62
    • /
    • 1989
  • Inclusion complex formation of octyldimethl p-aminobenzoate with $\beta$-cyclodextrin in aqueous solution and in the solid state was studied by the solubility method, spectroscopic(UV, FT-lR) and X -ray diffractometry. The solid complex of octyldimethy p-aminobenzoate with $\beta$-cyclodextrin was obtained in molar ratio of 1 : 2(guest/host). A spatial relationship between host and guest molecule was clearly reflected in the magnitude of the apparent stability constant (K') and in the stoichiometry of the inclusion complex. Furthermore, a typical type Bs phase-solubility diagram was obtained for octyldimethyl p-aminobenzoate and p -cyclodextrin in water at $25^{\circ}C$. The results indicated that the solubility of the guest molecule was higher by the formation of $\beta$-cyclodextrin inclusion complex.

  • PDF

Octyldimethl p-aminobenzoate 와 ${\beta}-Cyclodextrin$의 포접화합물(包接化合物)에 관(關)한 연구(硏究) (A Study on the Inclusion Complexation of Octyldimethyl p-aminobenzoate with ${\beta}-Cyclodextrin$)

  • 이창학;소부영;김영수
    • 한국응용과학기술학회지
    • /
    • 제6권1호
    • /
    • pp.59-66
    • /
    • 1989
  • Inclusion complex formation of octyldimethyl p-aminobenzoate with ${\beta}-cyclodextrin$in aqueous solution and in the solid state was studied by the solubility method, spectroscopic (UV, FT-IR) and X-ray diffractornetry. The solid complex of octyldimethyl p-aminobenzoate with ${\beta}-cyclodextrin$ was obtained in molar ratio of 1:2 (guest/host). A spatial relationship between host and guest molecule was clearly reflected in the magnitude of the apparent stability constant (K') and in the stoichiometry of the inclusion complex. Furthermore, a typical type Bs phase-solubility diagram was obtained for octyldimethyl p-aminobenzoate and ${\beta}-cyclodextrin$ in water at $25^{\circ}C$. The results indicated that the solubility of the guest molecule was higher by the formation of ${\beta}-cyclodextrin$ inclusion complex.

우라늄 및 희토류(稀土流) 산화물(酸化物)의 황화반응(黃化反應)에 대한 열역학적(熱力學的) 고찰(考察) (Study on Thermodynamic Properties of Sulfidization for Uranium and Rare Earth Oxides)

  • 이정원;이재원;강권호;박근일
    • 자원리싸이클링
    • /
    • 제21권1호
    • /
    • pp.66-74
    • /
    • 2012
  • 우라늄 및 희토류(RE: rare-earth) 산화물의 황화반응에 대한 $M-O_2-S_2$ 상태도 및 Gibbs 자유에너지 변화(${\Delta}G^{\circ}$)와 같은 열역학적 특성 자료를 비교, 분석하여 우라늄 및 회토류 산화물의 혼합상에서 황화반응에 의해 희토류산화물만 희토류황화물로의 선택적 반응이 가능한지를 조사하였다. 황화제로는 $CS_2$가 적합하였는데, $CS_2$는 다른 황화제보다 강한 황화재이며 반응온도를 낮출 수 있다. $CS_2$를 황화제로 이용하여 $U_2-O_2-S_2$$RE-O_2-S_2$의 상태도를 비교한 결과, $UO_2$은 반응하여 UOS로 전환되며 희토류산화물은 반응하여 희토류황화물이 되었다. 희토류산화물의 황화반응에 의한 ${\Delta}G^{\circ}$는 우라늄산화물의 ${\Delta}G^{\circ}$보다 낮았다. 따라서 희토류와 우라늄 산화물 혼합상은 $300{\sim}800^{\circ}C$에서의 황화반응 시에 평형상태에서 우라늄산황화물과 희토류황화물이 우선적으로 생성된다.

I-PDA Controller Designed by CDM Incorporating FFC for Two-Inertia System

  • Khuakoonrat, Nopnarong;Benjanarasuth, Taworn;Isarakorn, Don;Ngamwiwit, Jongkol;Komine, Noriyuki
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1833-1837
    • /
    • 2004
  • The two-inertia system, which has the torsion vibration, is typically found in several industrial applications. This torsion vibration will effect the quality of the rolled material as well as the stability of the drive system. Thus the speed and torsion vibration of the system have to be properly controlled. This paper, I-PDA controller designed by Coefficient Diagram Method to control a two-inertia system is proposed. The experimental result shows that both of transient and steady state specification can be fulfilled but the transient response still has long rise time. In order to improve the speed of the system response, a phase lag structure of feedforward controller is introduced to I-PDA control system. It is shown that the performance of the I-PDA control system with suitable FFC has shorter rise and settling times, no overshoot and the torsion vibration can be suppressed.

  • PDF