• 제목/요약/키워드: stability period

검색결과 1,550건 처리시간 0.025초

Design of PDP Driving Waveforms for Enhanced Stability

  • Kim, Seok-Il;Jeong, Ju-Young
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2003년도 International Meeting on Information Display
    • /
    • pp.706-709
    • /
    • 2003
  • We made an optimization effort on driving waveforms for the Quantized Memory Addressing (QMA) in selective write mode of operation. It was necessary to add long ramp type erase pulses after the total write pulse and the sustain period to obtain stable intermediate luminance discharges. Furthermore, fast rising ramp type total write as well as two step addressing scheme were adopted for better discharge stability.

  • PDF

DYNAMICS OF A SINGLE SPECIES POPULATION IN A POLLUTED ENVIRONMENT

  • Pal, A.K.;Samanta, G.P.
    • Journal of applied mathematics & informatics
    • /
    • 제28권5_6호
    • /
    • pp.1185-1202
    • /
    • 2010
  • In this paper, we have studied the dynamical behaviour such as boundedness, local and global stabilities, bifurcation of a single species population affected by environmental toxicant and population toxicant. We have also studied the effect of discrete delay of the environmental toxicant on the instantaneous growth rates of the population biomass and population toxicant due to incubation period. The length of delay preserving the stability is also estimated. Computer simulations are carried out to illustrate our analytical findings.

상하악 동시 악교정술시 안정성에 관한 연구;[Ⅰ] 강선 고정에 의한 방법 (STABILITY OF SIMULTANEOUS MAXILLARY AND MANDIBULAR SURGERY;[Ⅰ]Wire osteosynthesis)

  • 김여갑
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제12권2호
    • /
    • pp.9-20
    • /
    • 1990
  • A series of 19 cases with maxillary hyperplasia and mandibular retrognathia were operated on by simultaneous superior repositioning of the maxilla after Le Fort I osteotomy and anterior repositioning of the mandible after bilateral sagittal split ramus osteotomies with or without osteotomy of the inferior border of the mandible. These were evaluated by retrospective cephalometric and computer analysis for the longitudinal skeletal and dental changes for an average of 17.1 months after surgery. For stabilization of the osteotomized segments, the authors used wire osteosynthesis by means of bilateral infraorbital and zygomatic buttress suspension wire at the maxilla, and direct interosseous wire at the split segments of the mandibular rami. Results show generally good stability after simultaneous maxillary and mandibular surgery with wire osteosynthesis, and a minimal to moderate tendency toward skeletal and dental relapse. This article is a preliminary study to defy the efficiency of the wire osteosynthesis (wo)compared with rigid internal fixation (RIF) for simultaneous maxillary and mandibular surgery. 1. The vertical relapse rate of the A point after superior repositioning of the maxilla is 2.2%. 2. The horizontal relapse rate of the B point after advancement of the mandible is 18.3%. 3. The condyle is distracted inferiorly and slightly posteriorly at the immediate postoperative period. 4. At the long term follow up examination, the condyle presents tendency of return to the preoperative position. 5. Condylar segment angle is decreased at the immediate postoperative period, and at the long term follow up evaluation, the angle is increased. 6. Gonial angle is increased at the immediate postoperative period, and then is decreased at the long term follow up evaluation. 7. The dentition is satisfactory with acceptable movement at the long term follow up evaluation. 8. At the mandibular free body analysis, genioplasty shows good stability. 9. Wire osteosynthesis provides excellent stabilization for the simultaneous maxillary and mandibular surgery.

  • PDF

Variation and stability of agricultural characteristics in soybean landraces and cultivars

  • Seo, Min Jung;Park, Myoung Ryou;Yun, Hong Tae;Park, Chang Hwan
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.221-221
    • /
    • 2017
  • This experiment was performed to analyze variation of growth traits of soybean to determine the information of less sensitive traits under different environmental conditions. Sowing was carried out on June 2 each year and the experimental plot was laid out in three replicates by randomized complete block design with thirty soybean varieties which consisted of 19 cultivars for beancurd and soypaste, 8 cultivars for soy-sprout including 1 landrace, and 3 cultivars for cooking with rice including 1 landrace during the period 2014-2015. The weather conditions during the experimental period were quite different with extremely low precipitation and longer sunshine duration in 2015 than 2014. The variation of characteristics related to growth period such as days of growth, days of maturity, days of flowering and the 100-seed weight was less in spite of different environmental conditions. While the variation of the number of pods per plant was high. Considering growth and seed characteristics like the number of pods per plant, the number of seeds per pod and 100-seed weight which are linked directly to the yield, cultivars such as Shingi, Daewonkong, Danbaegkong, and Daepung for beancurd and soypaste, Pungwon, Haepum and Shingang for soy-sprout and Seoritae for cooking with rice were more stable and could be expected to have high yield in Suwon, the south-central part of South Korea. These results could be useful for the selection of breeding resources to develop cultivars with high stability under changeable weather condition.

  • PDF

자초근 대두유에 대한 산화안정성 검토 (Oxidation Stability of Soybean Oil Containing Lithospermum erythrorhizon)

  • 김진숙;이지현;장영은;한영실;강명화;한귀정;조용식
    • 한국식품조리과학회지
    • /
    • 제21권3호
    • /
    • pp.283-289
    • /
    • 2005
  • To investigate the oxidative stability of the Lithospermum erythrorhizon extracted oil, we prepared extracted oil from the cultivated and wild roots of Lithospermum erythrorhizon by autoclave method with soybean oil. The oil were stored for 30 days at $60^{\circ}C$, and the peroxide value (POV), acid value (AV) and carbonyl value(CV) were measured periodically. The weight was highly decreased in the oil added roots of Lithospermum erythrorhizon during the storage period. POV of soybean oil containing wild and cultivated Lithospermum erythrorhizon was generally enhanced with prolonged storage time, with the POV of the samples being lower than 100 meq/kg.oil after 30 days of storage. However, the POV of soybean oil was higher than 100meq/kg.oil after 10 days of storage. The pattern of the changes of AV and CV of soybean oil containing wild and cultivated Lithospermum erythrorhizon, were almost constant during the experimental periods. Nevertheless, the pattern of the changes of AV of soybean oil was rapidly increased during 20 days of storage, and that of CV of soybean oil was rapidly increased duringdays of storage and then slowly increased during the remainder of the experimental period. However, soybein oil was rapidly increased during 20 days of storage and then slowly decreased during the reminder of the experimental period. The overall results suggest that wild and cultivated Lithosyermum erythrorhizon added antioxidant activities to the autooxidation of soybean oil.

원심모형 실험을 통한 궤도지지말뚝구조의 동적 거동 평가 (Dynamic Behavior Evaluation of Pile-Supported Slab Track System by Centrifuge Model Test)

  • 유민택;이명재;백민철;추연욱;이일화
    • 한국지반공학회논문집
    • /
    • 제35권2호
    • /
    • pp.5-17
    • /
    • 2019
  • 철도하중 및 지진하중 재하 시 궤도지지말뚝 구조의 동적 거동 평가를 위해 동적원심모형 실험을 수행하였다. 실험의 변수는 연약지반의 깊이와 성토체의 높이로 결정하였으며, 총 4가지 경우에 대해 실험을 수행하였다. 연약지반 깊이는 실제 연약지반층에 고속철도를 부설한 호남고속철도의 익산-정읍 구간의 시추주상도를 분석하여 결정하였으며, 성토체의 높이는 일반적인 고속철도의 성토체 높이 범위의 하한 값과 상한 값으로 결정하였다. 실험 결과, 연약지반 깊이 대비 성토체 높이 비율이 높을 수록 말뚝에 작용하는 최대 휨모멘트 값이 크게 평가되었다. 또한, 실험조건 내에서 부설되는 궤도지지말뚝 구조는 단주기 지진파에 대해서는 국내 내진설계 기준의 최대 지진하중인 0.22g에 대해서까지 안전한 것으로 확인되었다. 그러나, 장주기 지진파에 대해서는 재현주기 2400년 지진인 0.22g로 가진시 말뚝의 균열 모멘트가 초과되었다. 일련의 실험결과를 바탕으로, 본 논문에 기술된 연약지반 깊이와 성토체 높이 범위 내에서 궤도지지말뚝 일반 단면에 대한 연약지반 대비 성토체 높이 비율 기준을 제시하였다.

IDLE PERFORMANCE OF AN SI ENGINE WITH VARIATIONS IN ENGINE CONTROL PARAMETERS

  • Kim, D.S.;Cho, Y.S.
    • International Journal of Automotive Technology
    • /
    • 제7권7호
    • /
    • pp.763-768
    • /
    • 2006
  • Emission reduction in the cold start period of SI engines is crucial to meet stringent emission regulations such as SULEV Emissoin reduction is the starting point of the study in the which the variable valve timing (VVT) technology may be one promising method to minimize cold start emissions while maintaining engine performance. This is because it is possible to change valve overlap and residual gas fraction during cold start and idle operations. Our previous study showed that spark timing is another important factor for reducing cold-start emissions since it affects warm-up time of close-coupled catalysts (CCC) by changing exhaust gas temperature. However, even though these factors may be favorable for reduction of emissions, they may deteriorate combustion stability in these operating conditions. This means that the two variables should be optimized for best exhaust emissions and engine stability. This study investigated the effects of valve and spark timings in idle performance such as combustion stability and exhaust emissions. Experiments showed that valve timings significantly affected engine stability and exhaust emissions, especially CO and $NO_x$, due to change in residual gas fraction within the combustion chamber. Spark timing also affects HC emissions and exhaust gas temperature. Yet it has no significant effects on combustion stability. A control strategy of proper valve timing and spark timing is suggested in order to achieve a reduction in exhaust emissions and a stable operation of the engine in a cold start and idle operation.

소액 전자결제시스템 수용의지에 관한 실증연구 : 시스템 특성, 거래비용과 제공업체를 중심으로 (An Empirical Study on User Acceptance of Micro e-Payment Systems : System Features, Transaction Cost, and Provider)

  • 정석균;류창완;구태용
    • 산업경영시스템학회지
    • /
    • 제33권4호
    • /
    • pp.130-137
    • /
    • 2010
  • This paper analyzes the main factors affecting user selection of a small-sum electronic payment system using survey data of 396 users. Several findings emerge. First, users consider three pillars and eight factors in adopting a new system : system features(stability, security, and flexibility), transaction cost(payment commission and settlement period), and financial capability of provider(stability of financial structure, risk management capability, and funding capability). Second, the stability of the financial structure of the system provider is the most important factor to user acceptance of a new e-payment system. Users tend to consider uncertainty risk more seriously than transaction cost. This reflects the reality that electronic payment system service industry has not fully fledged yet. Third, some moderating effects exist according to payment methods and business usages. As for payment methods, speedy settlement cycle for wired/wireless phone payment, system stability for credit card and account transfer payment, and security for advance payment means are crucial factors. As for business usages, the stability of financial structure for online game content, system stability for music and video content, proxy payment commission for e-learning content, flexibility of the payment system for digital adult content, and security for public services are decisive ones.

도시 및 농촌지역 사업체 유형별 노동시장 안정성 비교분석: 산업군, 종사자규모 및 존속기간별 유형을 중심으로 (Analysis and Comparison of Labor Market Stability by Business Categories in Urban and Rural Areas : Industrial Group, Employment Size, and Survival Duration)

  • 이제명
    • 농촌계획
    • /
    • 제23권1호
    • /
    • pp.97-112
    • /
    • 2017
  • Stability of labor market in rural areas was analyzed in this paper with categories of industrial group, employment scale, surviving period, and founder group. The stability of each classified labor market was compared with each other to figure out the stable business class and the unstable class in rural areas. The results of rural areas were compared with those of urban areas. The stability was analyzed with average and coefficient of variation (C.V.) of annual total employees' change rates. It was revealed that labor market of 'primary industry', including agriculture, is unstable. Especially, labor market of 'mid-size' and 'primary industry' businesses founded as 'incorporated company' in rural areas is vulnerable. While labor market of 'large-size' is proved to be unstable, it is confirmed that 'small-size' or 'mid-size', and 'over-ten-year survived' businesses have positive contribution to the stable labor market in rural and urban areas. The results show that the stability of labor market is different in each category of business and in each region of rural or urban area. It is expected that the results can be utilized for the regional development policies, of labor and industry part.

이중나사산 임플란트의 안정성에 대한 평가 - 골유착 기간 중의 임상적 평가; PART II (Evaluation of Stability of Double Threaded Implant - Clinical Assessment During Osseointegration; Part II)

  • 허진호;김시엽;이주연;정창모;김용덕
    • 구강회복응용과학지
    • /
    • 제23권4호
    • /
    • pp.337-358
    • /
    • 2007
  • Purpose This study was performed to evaluate the stability of dual thread implant using resonance frequency analysis in human. Materials and methods Fifty-five patients(32 males and 23 females) with a mean age of 50 years and 1 month who were treated during March, 2005 to July, 2007 in Pusan National University hospital. Totally 145 dual thread Implants were installed and initial stability was measured by Osstell $Mentor^{TM}$. After 3-6 Months, secondary stability was measured at the time of second surgery or before prosthetic treatment. Results At the time of 1st surgery, average ISQ value was $75.12{\pm}12.06$. Only 1 implant was failed during the healing period. Before prosthetic treatment, ISQ values were measured and its mean value was $80.94{\pm}6.12$. Conclusion These results suggest that the increased stability of the implant verifies the clinical relevance of double thread implant.