• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권2호
• /
• pp.64-69
• /
• 2012

This paper presents a hybrid pulse width modulation (PWM) method under low switching frequency conditions based on space vector PWM (SVPWM) and selective harmonic eliminated PWM (SHEPWM), which use asynchronous carrier modulation SVPWM at low frequency, and SHEPWM at high frequency, a square wave after rated conditions. A transitive strategy is proposed to realize a smooth transition of individual modes including SVPWM, SHEPWM and square waves. Experimental results confirm this hybrid modulation method and their transition are reasonable and proper.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.304-309
• /
• 2005

This paper presents an electronic ballast using a step down converter, a low frequency inverter for high intensity short-arc discharge lamp. The proposed ballast is composed of a full-wave rectifier, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit. The ignition circuit generates high voltage pulse of $3{\sim}5[kV]$ peak, 130[Hz] periodically. Moreover, it is able to reignite at regular intervals by protective circuit. As experimental results on the test, acoustic resonance phenomenon is eliminated by operating the low frequency square wave voltage and current. Lamp voltage, current and consumption power are measured 123.8[V], 8.1[A] and 1,002[W], respectively. It was confirmed that the designed ballast operate the lamp with a constant power.

• 한국가축번식학회지
• /
• 제19권3호
• /
• pp.171-179
• /
• 1995

This study was carried out to investigate the fertilizing ability of round spematids isolated from seminiferous tubules. A round spermatid was introduced into the perivitelline space of a mature oocyte using Leitz micromanipulators and then subjected to electrofusion. Electrofusion was induced by applying a single DC pulse of 90V with a duration of 60$\mu$sec using Model 611 Square Wave Stimulator(Phipps and Bird, U.S.A) in 0.3 M sucrose fusion medium containing 0.05mM CaCl2 and 0.1mM MgSO4, Oocyte pre-activation was conducted by exposure to a single DC(80V, 80$\mu$sec) pulse in electrofusion medium at 1 hour before electrofusion. The incidence of fusion with pre-activated oocytes(23.8%, 57/239) was higher than that with nonactivated oocytes(6.7%, 3/45). The most of electro-stimulated mouse oocytes cleaved regardless of the success or failure of fusion. Karyotyping of embryos that developed into blastocysts after exposure to the fusion pulse were performe. We found that blastocysts from the fused oocytes were diploid whereas blastocysts from the unfused oocytes were haploid. About 11.7 and 11.5% of fused and unfused oocytes were developmental potentials of fused and unfused oocytes. Therefore, these results suggest that the mouse mture oocyte can be fertilized by fusion with a round spermtid and subsequently developed normally.

• 한국정보통신학회논문지
• /
• 제5권1호
• /
• pp.133-143
• /
• 2001

본 논문은 직각파 및 뇌충격진류에 대한 봉상접지각의 과도임피던스 특성을 정상접지지항과 비교.분석하였다. 접지계는 단일$(\Psi10[mm], 1[m])$과 5[m]의 간격을 두고 서로 연접한 3연접 봉상접지극으로 구성하였으며, 과도 임피던스 특성을 분석하기 위하여 상승시간 30[ns], 펄스폭 $20[\mus]$의 직각파전류 발생장치를 설계 제작하였다. 실제 낙뢰에 의한 접지임피던스의 변화를 관찰하기 위하여, 국제규격 ANSI/IEEE, IEC에 규정되어 있는 뇌충격전류를 인가하여 이에 따른 특성변화를 측정.분석하였다. 접지계로 유입된 과도전류는 접지계의 전위를 상승시키며, 이 때의 전위상승과 유입전류의 비로써 접지임피던스를 산출하며, 뇌격전류에 대한 경제적인 보호 수준을 평가.예측하기 위하여 임피던스 파라미터를 측정결과로부터 산출하였다. 또한 연접에 따른 접지임피던스의 감소와 접지리드선이 미치는 영향도 분석하였다.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.377-386
• /
• 1996

오스테나이트 스테인리스강 304L을 고질소 저압 분위기에서 400~$600^{\circ}C$ 범위내의 온도변수 $50^{\circ}$간격차이에 따라 펄스 직류 플라즈마를 발생시켜 펄스작용 시간비에 따라 5시간씩 질화처리를 실시하였다. 처리온도 $500^{\circ}C$를 전후하여 질화처리층의 상과 조직이 현저히 다르게 형성되었다. $500^{\circ}C$미만 범위에서 저온일수록 펄스작용 시간비가 높을 때 질화층은 일종의 비화학량론적인 질화 스테인리스강으로 형성되었고 박피막을 이루며 균열이 많이 발생했다. 처리온도가 $500^{\circ}C$보다 높을 때는 온도가 높아지거나 펄스작용 시간비가 50s/100s로 높아짐에 따라 질화층은 CrN 및 Fe4N 위주로 구성되어 주상정 조직을 이루며 균일하게 성장하며 무균열층이 된다. $500^{\circ}C$에서는 저온 조직 및 상과 고온 조직 및 상이 혼합된 질화층이 형성되며 취성이 대단히 크다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2274-2277
• /
• 2003

A cylindrical permanent magnet inside the four-phase permanent magnet (PM) stepping motor is employed as the rotor. The stator has four teeth around, which its coils are wound. The mode of excitation can be classified into 3 modes: single-phase excitation, two-phase excitation and ministep excitation. The ministep drive is a method to subdivide one step into several small steps by means of electronics. The paper presents the programmable ministep technique drive. This technique decodes the results obtained from the counter to locate the data in Read Only Memory (ROM). The Sinusoidal Pulse Width Modulation (SPWM) is transformed to binary file and saved to the ROM. The experiment is performed with the four-phase PM stepping motor and drives from a two-phase programmable sinusoidal ministep signal, instead of square wave. The results show that the performances of the proposed programmable ministep technique drive have high efficiency, smooth step motion, and high speed response. Moreover, the resolution of sinusoidal ministep signal can be controlled by the input frequency (f command).

• 한국전자파학회논문지
• /
• 제7권3호
• /
• pp.201-210
• /
• 1996

본 논문에서는 페이딩환경에서 16QAM Radio 시스템의 심볼 타이밍 복원에 대한 성능을 분석하였다. 심볼 타이밍 복원 방식으로서 파형 성형 필터 즉 raised cosine filter(RCF)와 비선형 필터를 사용하여 비영점교차방식인 MAM(Maximum Amplitude Method)과 WDM (Wave Difference Method)을 비교 분석하였다. 시뮬레이션에 의한 결과로부터 비선형 필터를 사용한 심볼 동기 방식(MAM and WDM)이 RCF를 사용한 것보다 지터 성능이 더 우수함을 알 수 있었다. 또한 레일리 페이딩채널을 추정하고 보상하기 위해 PSAM(Pilot Symbol Assisted Modulation)방식과 공간 다이버시티방석을 적용하였으며, $E_b/N_o$가 20dB일 때 $10^{-4}$의 BER(Bit Error Rate)성능을 얻을 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제31권1호
• /
• pp.1-5
• /
• 2018

This study analyzed the change of electrical characteristics of a photocoupler when a narrow-band electromagnetic wave was combined with the photocoupler. A magnetron (3 kW, 2.45 GHz) was used as the narrow-band electromagnetic source. The EUT was Photocoupler (6N139) and the input signal was divided into two types: a square pulse and the second signal is 0 V. The malfunction of the photocoupler was confirmed by monitoring the variation in the output voltage of the photocoupler. As a result of the experiment, changes in the malfunctioning was observed as the electric field was increased. There are three types of malfunction modes: delay, output voltage off, and fluctuation. Bit errors were analyzed to verify the electrical characteristics of the photocoupler by narrow-band electromagnetic waves. The result of this study can be used as basic data for the effect analysis of photocoupler protection and impact analysis of high-power electromagnetic waves.

• 조명전기설비학회논문지
• /
• 제19권4호
• /
• pp.98-107
• /
• 2005

브러시리스 DC 전동기(BLDCM)는 일반적으로 $120[^{\circ}]$ 구형파 전압을 인가하여 구동하며 속도 제어를 위하여 2상 PWM 형태의 펄스로 이를 인가한다. 본 논문은 네 가지 PWM 방법을 이용한 BLDCM 제어 시스템을 소개하고, 2차원 시간차분 유한요소법을 이용하여 각 PWM 방식에 따른 전동기 성능 특성을 해석하고 비교한다. 또한 제안한 해석 기법의 타당성을 입증하기 위하여 BLDCM 시작기를 제작, 실험을 통하여 해석치와 실험치를 비교한다.

• 전기의세계
• /
• 제24권1호
• /
• pp.43-53
• /
• 1975

This paper describes a converter, which combines SCR bridge type rectifier circuit with a rotating distributor. This type of converter produces an adjustable low frequency output of three phase or single phase, from three phase or single phase power source. Output-waveforms of this converter are multi-pulse in three phase output, and square wave in single phase output. Problems about the operation of static switches, a commutation and output-waveforms are investigated, and experimental results verify that frequency can be adjusted satisfactorily from zero to 20 (Hz) and the expected output-waveforms are obtained without sparking on the distributor under various loading conditions. This converter can be utilized to low speed control of A.C. motors, and other lowfrequency loads.