• 제목/요약/키워드: spurious

검색결과 527건 처리시간 0.025초

개인휴대통신을 위한 이동국 RF 수신시스템의 설계 및 성능개선에 관한 연구 (A study on the RF receiving system design and on the performance improvement for PCS mobile station)

  • 오정일;천종훈
    • 전자공학회논문지C
    • /
    • 제34C권11호
    • /
    • pp.66-75
    • /
    • 1997
  • We derive the system design parameters to implement the receiving system for the PCS mobile station to satisfy the J-sTD-018 which is the PCS mobile station(MS) minimum performance. Also we analyze the system performance and intermodulation spurious due to the values of a device cause the system performance degradation, is proposed. The simulation shows the receiver's maximum system noise figure to satisfy the receiver selectivity is approximately 11 dB. While the MS noise figure is 10dB with system margin 1 dB, the minimum selectivity is -71 dB at 1.25MHz frequency offset from the carrier frequency. And the input 3rd order intercept point of the MS class I and the MS class II~V is -9.5 dBm and -14dBm respectively. When the interference power level at the receiver is small, the receiver has better performance as we increase the gain of the LNA. However, when the interference level at the receiver is large, the receiver performance is heavily affected by the spurious as we increase the gain of the LNA. Thus, we proved the effectiveness of the LNA On/Off switching technique as to reduce the effect of the spurious.

  • PDF

낮은 위상 잡음을 갖는 Ka 대역 밀리미터파 탐색기용 하이브리드 주파수 합성기 (A Low Phase-Noise Ka-Band Hybrid Frequency Synthesizer for Millimeter Wave Seeker)

  • 임주현;한해진
    • 한국전자파학회논문지
    • /
    • 제22권11호
    • /
    • pp.1117-1124
    • /
    • 2011
  • 본 논문은 Ka 대역 밀리미터파 탐색기용 주파수 합성기 설계 및 제작에 대한 논문이다. 위상 잡음과 주파수 해상도 및 불요파 특성을 개선하고자 DDS를 이용한 하이브리드 방식으로 구현하였다. 제안된 주파수 합성기는 대역폭 1 GHz, 주파수 스위칭 시간은 9 ${\mu}s$ 이하, 불요파 특성 -68.9 dBc 이하, 위상 잡음 특성은 오프셋 100 kHz에서 -113.58 dBc/Hz, 평탄도는 ${\pm}$0.7 dB 이하로 측정되었다.

면외변형 링 요소를 이용한 고유해석 (An Eigen Analysis with Out-of-Plane Deformable Ring Element)

  • 문원주;민옥기;김용우
    • 대한기계학회논문집
    • /
    • 제17권7호
    • /
    • pp.1719-1730
    • /
    • 1993
  • This paper presents the theoretical natural frequencies of out-of-plane deformable ring based on the variables such as out-of-plane deflection, torsional rotation and shear rotation. Based on the same variables, a finite element eigen analysis is carried out by using the $C^0$-continuous, isoparametric element which has three nodes per element and three degrees-of-freedom at each node. Numerical experiments are peformed to find the integration scheme which produces accurate natural frequencies, natural modes and correct rigid body motion. The uniformly reduced integration and the selective reduced integration give more accurate numerical frequencies than the uniformly full integration, but the uniformly reduced integration produces incorrect rigid body motion while selective reduced integration does correct one. Therefore, the ring element based on the three variables which employes selective reduced integration is recommended to avoid spurious modes, to alleviate the error due to shear locking and to produce correct rigid body motion, simultaneously.

Design of Low-Pass Type Inverter: UWB Band-Pass Filter with Low Spurious Characteristics

  • Cho, Young-Ho;Choi, Moon-Gyu;Yun, Sang-Won
    • Journal of electromagnetic engineering and science
    • /
    • 제11권2호
    • /
    • pp.83-90
    • /
    • 2011
  • In this paper, we present the design method for a low-pass type inverter, which can effectively suppress the spurious response associated with band-pass filters. The inverter has a length of ${\lambda}/4$ and employs not only a stepped-impedance configuration but also asymmetrical and bending structures in order to improve frequency selectivity and compactness. The inverter is applied as an impedance/admittance inverter to the ultra-wideband (UWB) band-pass filter. The UWB band-pass filter configuration is based on a stub band-pass filter consisting of quarter-wavelength impedance inverters and shunt short-circuited stubs ${\lambda}/4$ in length. The asymmetrical stepped-impedance low-pass type inverter improves not only the spurious responses, but also the return loss characteristics associated with a UWB band-pass filter, while a compact size is maintained. The UWB band-pass filter using the proposed inverters is fabricated and tested. The measured results show excellent attenuation characteristics at out-band frequencies, which exceed 18 dB up to 39 GHz. The insertion loss within the pass-band (from 3.1 to 10.6 GHz) is below 1.7 dB, the return loss is below 10 dB, and the group delay is below 1 ns.

Analysis of multiple spurious operation scenarios of Korean PHWRs using guidelines of nuclear power plants in U.S.

  • Kim, Jaehwan;Jin, Sukyeong;Kim, Seongchan;Bae, Yeonkyoung
    • Nuclear Engineering and Technology
    • /
    • 제51권7호
    • /
    • pp.1765-1775
    • /
    • 2019
  • Multiple spurious operations (MSOs) mean multiple fire induced circuit faults causing an undesired operation of one or more systems or components. The Nuclear Energy Institute (NEI) of the United States published NEI 00-01 as guidelines for solving MSOs. And this guideline includes MSO scenarios of pressurized water reactor (PWR) and boiling water reactor (BWR). Nuclear power plant operators in U.S. analyzed MSOs under MSO scenarios included in NEI 00-01 and operators of PWRs in Korea also analyzed MSOs under the scenarios of NEI 00-01. As there are no pressurized heavy water reactors (PHWRs) in the United States, MSO scenarios of PHWRs are not included in the NEI 00-01 and any feasible scenarios have not been developed. This paper developed MSO scenarios which can be applied to PHWRs by reviewing the 63 MSO scenarios included in NEI 00-01. This study found that seven scenarios out of the 63 MSO scenarios can be applied and three more scenarios need to be developed.

주파수 변조 단속 지속파를 이용하는 고해상도 밀리미터파 탐색기의 스퓨리어스 제거를 위한 스펙트럼 분석 기법 (Spectral Analysis Method to Eliminate Spurious in FMICW HRR Millimeter-Wave Seeker)

  • 양희성;전주환;송성찬
    • 한국전자파학회논문지
    • /
    • 제23권1호
    • /
    • pp.85-95
    • /
    • 2012
  • 본 논문에서는 주파수 변조 단속 지속파(Frequency Modulated Interrupted Continuous Wave: FMICW) 시스템을 기반으로 한 고해상도(HRR: High Range Resolution) 레이더 탐색기에서 발생하는 스퓨리어스(Spurious)를 제거하기 위한 스펙트럼 분석 기법에 대해서 연구하고 새로운 제거 기법을 제안한다. 주파수 변조 지속파(Frequency Modulated Continuous Wave: FMCW)를 기반으로 하는 고해상도 레이더 시스템과 다르게 FMICW를 사용한 시스템은 주기적으로 나타나는 비연속적 IF(Intermediate Frequency) 신호에 의해 스펙트럼 상에서 스퓨리어스가 생기게 된다. 이러한 스퓨리어스를 제거하기 위해서 대역 통과 필터(band pass filter)를 사용하면 FMICW 시스템의 정확도가 이전 추정된 거리 값에 의존적이 되고 random interrupted sequence를 사용하면 noise floor가 증가하며, staggering process를 사용하면 중복된 정보를 위해 여러 개의 파형을 송신해야 되는 단점이 있다. 최근 소개된 IAA(Iterative Adaptive Approach) 또는 SPICE(SemiParametric Iterative Covariance-based Estimation method)와 같은 스펙트럼 분석 기법을 이용하면 이러한 단점 없이 FMICW 시스템에서의 스퓨리어스를 효과적으로 제거할 수 있다. IAA 또는 SPICE를 사용하기 위해서는 신뢰할 수 있는 데이터(reliable data)와 신뢰할 수 없는 데이터(unreliable data)를 구분하고, 신뢰할 수 있는 데이터만 이용하여야 하는데, 이를 위해서 STFT(Short Time Fourier Transform)가 적용된다.

Evaluation of Recursive PIV Algorithm with Correlation Based Correction Method Using Various Flow Images

  • Daichin;Lee, Sang-Joon
    • Journal of Mechanical Science and Technology
    • /
    • 제17권3호
    • /
    • pp.409-421
    • /
    • 2003
  • The hierarchical recursive local-correlation PIV algorithm with CBC (correlation based correction) method was employed to increase the spatial resolution of PIV results and to reduce error vectors. The performance of this new PIV algorithm was tested using synthetic images, PIV standard images of Visualization Society of Japan, real flows including ventilation flow inside a vehicle passenger compartment and wake behind a circular cylinder with riblet surface. As a result, most spurious vectors were suppressed by employing the CBC method, the hierarchical recursive correlation algorithm improved the sub-pixel accuracy of PIV results by decreasing the interrogation window size and Increased spatial resolution significantly. However, with recursively decreasing of interrogation window size, the SNR (signal-to-noise ratio) in the correlation plane was decreased and number of spurious vectors was increased. Therefore, compromised determination of optimal interrogation window size is required for given flow images, the performance of recursive algorithm is also discussed from a viewpoint of recovery ratio and error ratio in the paper.

2차원 유체- 구조물-지반 상호작용해석 전산프로그램 (A Computer Program for 2-D Fluid-Structure-Soil Interaction Analysis)

  • 김재민
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.427-434
    • /
    • 2000
  • This paper presents a computer program for a 2-D fluid-structure-soil interaction analysis. With this computer program the fluid can be modeled by a spurious free 4-node displacement-based fluid element which uses rotational penalty and mass projection technique in conjunction with the one point reduced integration scheme to remove the spurious zero energy modes. The structure and near field soil are discretized by the standard finite elements while the unbounded far field soil are discretized by the standard finite elements while the unbounded far field soil is represented by the frequency dependent dynamic infinite elements. Sine this method models directly the fluid-structure-soil system it can be applied to the dynamci analysis of 2-D liquid storage structure with complex geometry. For the purpose of verification dynamic analyses for tanks on a rigid foundation and on compliant embankment are carried out. Comparison of the present results with those by ANSYS program shows good agreement.

  • PDF

2차원 유체-구조뭍-지반계의 지진응답해석 (Earthquake Response Analysis for 2-D Fluid-Structure-Soil Systems)

  • 윤정방;장수혁;김재민;홍선기
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2000년도 봄 학술발표회논문집
    • /
    • pp.289-296
    • /
    • 2000
  • This paper presents a method of seismic analysis for a 2-D fluid-structure-soil interaction systems. With this method, the fluid can be modeled by spurious free 4-node displacement-based fluid elements which use rotational penalty and mass projection technique in conjunction with the one point reduced integration scheme to remove the spurious zero energy modes. The structure and the near-field soil are discretized by the standard 2-D finite elements, while the unbounded far-field soil is represented by the dynamic infinite elements in the frequency domain. Since this method directly models the fluid-structure-soil interaction systems, it can be applied to the dynamic analysis of a 2-D liquid storage structure with complex geometry. Finally, results of seismic analyses are presented for a spent fuel storage tank embedded in a layered half-space and a massive concrete dam on a layered half-space.

  • PDF

고조파 억제용 고온초전도 평면형 11-극 저역통과 필터의 제작 (Planar type high-$T_{c}$ Superconductor 11-pole Lowpass Filter for Suppression of Harmonics)

  • 강광용;김철수;곽민환
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.159-162
    • /
    • 2002
  • The eleventh-order coupled line lowpass filter(LPF) was designed to suppress harmonics and spurious signals. The microstrip type LPF was fabricated using a high-$T_{c}$ superconductor(HTS) $YBa_{2}$$Cu_{3}$$O_{7-x}$(YBCO) thin film with the $CeO_{2}$ buffer layer which was deposited on the sapphire ($Al_{2}O_{3}$) substrate of 30 x 30 $mm^{2}$. The coupled-line type LPF was designed for 1.2 GHz of cutoff frequency with 0.01 dB of ripple level at passband. The fabricated HTS LPF shows excellent attenuation characteristics in stopband of 1.2~9.5GHz (7-attenuation poles in the stopband), and shows low insertion loss (0.2 dB) and return loss (17.1 dB) in the pass- band. These measured results match well with those obtained by the EM simulation. This clearly demonstrates that the HTS LPF can suppress harmonics and spurious signals effectively.

  • PDF