• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 춘계학술대회 논문집
• /
• pp.51-57
• /
• 2001

In order to estimate attenuation characteristics, nonparametric model is used. Evaluation of this model requires suites of average spectral amplitude data as a function of distance without adopting any assumed parametric forms. Values of Quality factor, Q were estimated for individual frequencies by matrix inversion of S wave amplitude spectra for 21 records of 8 small and intermediate earthquakes (2.7$(1/r)^{1/2}$. The best models for 1/Q values were found to be 0.000453+0.001851/f and 0.000451+0.009261/f, respectively. This results can be compared to the conventional functional form of Q=$af^{b}$ and be used to estimate source spectra and site response.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.633-638
• /
• 2012

최대 액막 직경은 액적이 표면에 충돌한 이후에 최대로 퍼질 수 있는 정도를 의미하며, 분무기술과 관련된 다양한 응용분야에서 분무성능을 결정하는 중요한 인자 중의 하나이다. 본 연구에서는 고체표면에 충돌하는 뉴턴 액적에 대한 기존의 최대 액막 직경 모델들을 $4{\leq}Re{\leq}11700$, $23{\leq}We{\leq}786$, $37.9^{\circ}{\leq}{\theta}_s{\leq}107.1^{\circ}$ 범위에 해당하는 본 연구의 실험결과와 비교하여 검토하였다. 실험결과, 유체의 점도 및 충돌속도에 비하여 표면 젖음성이 최대 액막 직경에 미치는 영향은 미미한 것으로 나타났다. 한편, 기존의 모델 중에서 Roisman (2009) 모델은 최대 액막 직경에 대한 실험데이터의 80%를 ${\pm}5%$ 이내로 예측함으로써 가장 우수한 예측성능을 보였다.

• 한국입자에어로졸학회지
• /
• 제18권4호
• /
• pp.129-136
• /
• 2022

The line width of circuits in semiconductor devices continues to decrease down to a few nanometers. Since nanoparticles attached to the patterned wafer surface may cause malfunction of the devices, it is crucial to remove the contaminant nanoparticles. Physical cleaning that utilizes momentum of liquid for detaching solid nanoparticles has recently been tested in place of the conventional chemical method. Dropwise impaction has been employed to increase the removal efficiency with expectation of more efficient momentum exchange. To date, most of relevant studies have been focused on drop spreading behavior on a horizontal surface in terms of maximum spreading diameters and average spreading velocity of drop. More important is the local liquid velocity at the position of nanoparticle, very near the surface, rather than the vertical average value. In addition, there are very scarce existing studies dealing with microdroplet impaction that may be desirable for minimizing pattern demage of the wafer. In this study, we investigated the local velocity distribution in spreading liquid film under various impaction conditions through the CFD simulation. Combining the numerical results with the particle removal model, we estimated an effective cleaning diameter (ECD), which is a measure of the particle removal capacity of a single drop, and presented the predicted ECD data as a function of droplet's velocity and diameter particularly when the droplets are microns in diameter.

• 한국음향학회지
• /
• 제20권2호
• /
• pp.44-51
• /
• 2001

본 연구에서는 능동소나와 관련된 시스템에 적용가능한 잠수함 수중표적의 표적강도 및 신호형태를 예측하는 반사신호 합성모델을 제안한다. 이는 입사각에 따라 외부헐로 하이라이트의 위치가 변하는 UTAHID (Underwater TArget by Highlight Distribution) 모델을 기초로 하여 잠수함 내부의 복잡한 형상에 의한 반사점들을 산란자운에 의한 구룹화된 하이라이트군으로 변형을 가하여 반사신호를 합성한다. 제안된 모델은 입사신호의 펄스길이 변화에 따른 표적강도 변화특성 및 합성신호 파형, 시간분산손실, 신장효과 등에 대해 분석하였으며, 이는 능동소나, 음향대항, 감시 시스템과 같이 반사신호 합성에 관련된 여러가지 실시스템에 적용이 가능하다.

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.343-352
• /
• 1999

Because stow net being used in now is doing throwing net and hauling net through a ship's side, the work is very complicated and the fishing boat needs many seamen and it could cause a loss of lives and ship in stormy weather. We are now using small mesh size 36~500mm and it even catches young fish, so we call it the fishing gear of resource reduction type.Therefore we must make manpower reduction in automatic operation, safe operation of throwing net and hauling net in the stern and the stern-typed stow net of resource management using large mesh. And we performed three-typed model tests to examine the fishing gear. The obtained results are as follows;1. The fishing gear being used in the ship's side type stow net has inappropriate standard and arrangement of the net, resistance increase of the fishing gear and frequent breakdown of the net.2. To supplement the fault of A-typed stow net, we schemed fishing gear developed as both B-type(12-seamed net) and C-types(8-seamed net) of the stern-typed stow net. 3. In model tests, C-typed model net(mesh size 40~1,600mm) was proved good fishing gear because the resistance in accordance with the flowing speed was comparatively small and it's mouth area was broad. 4. A-typed stow net had the spreading device attached to side panel of the net, but the stern-typed stow net had the spreading device consisted of 4 lines far behind about 6m from side panel of the net mouth. In the flowing speed 2knot, the spreading condition of fishing gear was proved batter than the former.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2000년도 하계학술발표대회 논문집 제19권 1호
• /
• pp.335-336
• /
• 2000

A psychoacoustic model based noise shaping method is proposed, where noise's presence with a host signal will not be perceptually noticeable. The derivation of imperceptible noise levels from the masking thresholds of the signal involves a deconvolution associated with the spreading function in the psychoacoustic model, which results in an ill-conditioned problem. In this paper, the problem is formulated as a constrained optimization, and it is demonstrated that the solution provides noise shaping where the noise excitation level conforms to the masking thresholds of the signal.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.358-361
• /
• 2008

A study is made of thermal plume flow model for the development of helicopter simulator over the forest fire. For numerical analysis, the Boussinesq fluid approximation and line fire model, which is assumed by the shape of forest fire spreading, are adopted. Comparing 3-D full numerical solutions with 2-D similarity solution, it has been built a new model that is capable of temperature prediction along the symmetric vertical axis in both cases of laminar and turbulent flows.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.267-273
• /
• 1992

An advanced on-resistance model of VDMOS devices in the low voltage regimes is proposed and verified by 2-D device simulations. The model considers the lateral gaussian doping profiles in the channel region and exact current spreading angles in the epitaxial layer for both linear and cellular geometries by employing the conformal mapping, It is found out that the on-resistance of low voltage VDMOS may be overestimated considerably if it is analyzed by the conventional method. The 2-D device simulation results show that the proposed model is valid for the VDMOS devices in the low voltage regimes.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.435-437
• /
• 2003

This study presents work to utilize RADARSAT SAR image for forecast oil slick trajectory movement. The fractal dimension algorithm used to detect oil slick. The Doppler frequency shift and quasi-linear model was used to simulate a current pattern from RADARSAT image. The Fay’s algorithm of oil slick spreading was developed based on a Doppler frequency shift model. Thus, the study shows that fractal dimension algorithm discriminated the oil slick from the surrounding water features. The quasi-linear model shows that the current pattern can be simulated from single RADARSAT image. The oil slick trajectory model shows that after 48 hrs, the oil slick parcels deposited along the coastal waters.

• Earthquakes and Structures
• /
• 제5권2호
• /
• pp.239-259
• /
• 2013

Typically, beams that form part of structural systems are subjected to vertical distributed loading along their length. Distributed loading affects moment and shear distribution, and consequently spread of inelasticity, along the beam length. However, the finite element models developed so far for seismic analysis of frame structures either ignore the effect of vertical distributed loading on spread of inelasticity or consider it in an approximate manner. In this paper, a beam-type finite element is developed, which is capable of considering accurately the effect of uniform distributed loading on spreading of inelastic deformations along the beam length. The proposed model consists of two gradual spread inelasticity sub-elements accounting explicitly for inelastic flexural and shear response. Following this approach, the effect of distributed loading on spreading of inelastic flexural and shear deformations is properly taken into account. The finite element is implemented in the seismic analysis of plane frame structures with beam members controlled either by flexure or shear. It is shown that to obtain accurate results the influence of distributed beam loading on spreading of inelastic deformations should be taken into account in the inelastic seismic analysis of frame structures.