• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.2
• /
• pp.68-76
• /
• 1992

Concurrent Junction process (simultaneous formation of a silicide and a junction on the implanted substrate) by Rapid Thermal Annealig has been investigated. Electrical and material properties of CoSi$_2$ films were analyzed with Alpha Step, 4-point probe, X-ray diffraction(XRD) and Scanning Electron Microscope(SEM). And CoSi$_2$ junctions were examined with Spreading Resistance probe in order to see the redistribution of electrically activated dopants and determined the junction depth. Two step annealing process, which was 80$0^{\circ}C$ for 30sec and 100$0^{\circ}C$ for 30sec in NS12T ambient was employed to form CoSi$_2$ and shallow junctions. Resistivity of CoSi$_2$ was turned out to be 11-15${\mu}$cm and shallow junctions less than 0.1$\mu$m were successfully formed by the process. It was found that the dopant concentration at CoSi$_2$/Si interface increased as decreasing the thickness of Co films in case of $p^{+}/n$ and $n^{+}/p$ junctions while the junction depth decreased as increasing CoSiS12T thickness in case of $p^{+}/n$ junction.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.196-203
• /
• 2000

In this study, the evaluation method of diffusion characteristics of Suspended Soli&SS) and the generation limit(source and thick) are investigated, which is significantly affecting on marine examined by construction works such as dredging and reclamation. Dispersion characteristics of SS is examined by hydraulic tests and numerical works in consideration with the Pusan Port. Hydraulic model test was performed in 2-D wave flume to find the limit wave conditon of re-suspension of solid as well as the time dependent characteristics of settlement The results obtainded in the study are as follows; 1) The quantituative evaluation af SS is the basic parameter of marine environmental impact assessment in related with the port development The SS increases as the water content of sea bed solid increases and the density decreases. 2) The sea bed solid in Sinsundai area, Pusan Port has the water content range of 83~157% 3) The ratio of suspension velocity against settlement velocity is about 0.25 and SS concentration converges as the wave heigh. 4) The SS increases 2 time when time step increases 3 time(10 sec to 30 sec) in numerical simulation It means that the effect of the time step should be checked in detail to stable. The diffusion The diffusion coefficient are Affiected senstively in the dispersion process while sea ved friction coefficinet have not strong relation in the simulated area

• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.152-158
• /
• 2004

The purpose of this study was to find the difficulties and problems in the carbon dioxide production experiment and to suggest the device for the improvement. Many students have misconception for the smell of carbon dioxide. I found that the smell of carbon dioxide of producting through the experiment didn't concern with the quantity of calcium carbonate. I certificated that the smell of carbon dioxide was related with the concentration of hydrochloric acid. I built two trap applicaing suction in the gas production device to exclude fully the smell of carbon dioxide. So the smell of carbon dioxide was not present by passing the two trap. To find the ideal experimental conditions I perform the experiment step by step. As the result enough carbon dioxide to use for the property experiment was collected under the condition that is 60 mL of 3 molarity hydrochloric acid and 30 g calcium carbonate. I certificated to mesuring flowing quantity of carbon dioxide using the flow meter of carbon dioxide. In the improvement experiment of the property of carbon dioxide, I proposed the experiment device regarding as spreading of the gas and children's interest. To improve the problem of gas production experiment, I proposed the gas certification device using a thread.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1246-1248
• /
• 2003

Internal wave with a soliton-like, large amplitudes within several kilometers, is frequently observed in the sea surface caused by tidal rectification due to sill or rough topographic changes. Internal waves can perturb current and density field, initiate bottom sediment re -suspension and mix nutrients to photic zone. Previous studies indicate that the appearance of internal wave in the Lombok Strait have been detected in SAR image data. This paper studies effect of internal wave in the Lombok Strait to chlorophyll distribution in the surrounded areas using SeaWiFS and ERS SAR images data during 1996-2001 periods. The preliminary result concludes that the internal waves presumably affect phytoplankton distribution spreading southeastward in the coast off Bali Island. The distribution of phytoplankton at southern coastline off Bali Island when internal wave occurred is elongated and distributed further to westward (from 8.8$^{\circ}$ to 10.7$^{\circ}$LS) than the area when internal wave did not occur on August 2000 (from 9.25$^{\circ}$ to 10.25$^{\circ}$LS) as shown in figure 3. It shown that the surface phytoplankton concentration near coastal area, i.e. from 8.8$^{\circ}$ to 9.25$^{\circ}$ LS, increased when internal wave is occurred.

• Journal of Radiation Industry
• /
• v.4 no.1
• /
• pp.39-45
• /
• 2010

The pollution of antibiotics is a major cause of spreading antibiotics resistant bacteria in the environment. Applications of ozonation, UV, and ${\gamma}-ray$ irradiations have been introduced to remove antibiotics in the effluents from wastewater treatment system. In this study, we compared the chemical (HPLC) and biological (antimicrobial susceptibility test, AMS) assays in measuring of the concentrations of residual antibiotics after ${\gamma}-ray$ and UV irradiation. Most samples were degraded by ${\gamma}-ray$ irradiation (1~2 kGy). However, lincomycin and tetracycline were not degraded by UV irradiation. The concentration of residual antibiotics, that was treated with ${\gamma}-ray$ and UV irradiation, measuring by bioassay was similar to HPLC. The concentrations of ${\gamma}-ray$ irradiated cephradine measured by AMS test were 2 times higher than that of HPLC assay, indicating AMS test is more sensitive than HPLC assay. These results indicate that ${\gamma}-ray$ irradiation technique is more useful than UV irradiation, and biological assay is more useful to detect the antibiotics and toxic intermediates in antibiotics degradation.

• Polymer(Korea)
• /
• v.28 no.1
• /
• pp.86-91
• /
• 2004

Hydrogels with enhanced biocompatibility and biostability were prepared by copolymerization of 2-hydroxyethyl methacrylate (HEMA) and sodium methacrylate (SMA) at high monomer concentration to replace a sponge which has limited applications as an implant material. It was found that incorporation of SMA moiety suppressed cytotoxicity. P(HEMA-co-SMA) hydrogel prepared at SMA feed ratio of 0.05 showed minimal cytotoxicity as compared with a normal cell culture plate. The adhesion and the spreading of cells were preferred on the surface of the hydrogel prepared with SMA feed ratio of 0.01. On the other hand, the hydrogel prepared with SMA feed ratio of 0.05 showed lower cell adhesion. Histological findings revealed no evidence of significant foreign body reaction in the tissues around the copolymer hydrogels. Conclusively, it is suggested that the hydrogels prepared by copolymerization of HEMA and SMA at high monomer concentration are strong candidates for an implant material with excellent biocompatibility and biostability.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.111-116
• /
• 2014

Objectives : The purpose of this study was to estimate the antioxidant activity of water extract of Cnidii Fructus (CF) and Torilis Fructus (TF) in Leydig cells. Methods : Free radical scavenging activity of CF and TF against 2,2-diphenyl-1-picrylhydrazyl (DPPH) was determined spectrophotometrically. We investigated the effect of CF and TF in Leydig cells by MTT assay. The protective effects of CF and TF against hydrogen peroxide-induced oxidative stress in Leydig cells. Superoxide dismutase (SOD), and catalase activity assays were performed in Leydig cells. Results : The results showed that CF scavenged DPPH radical in a dose-dependent manner by up to 81.2%, TF scavenged DPPH radical in a dose-dependent manner by up to 63.8%. CF showed cell viability as 121.0, 132.7, 126.6% in 5, 10, $100{\mu}g/ml$ concentrations. TF showed cell viability as 127.5, 111.8% in 5, $100{\mu}g/ml$ concentraions, respectively. The hydrogen peroxide-induced cytotoxicity of Leydig cells were protected to 86.3% by CF at concentration of $10{\mu}g/ml$ and protected to 83.5% by TF at concentration of $100{\mu}g/ml$. Both CF and TF at all concentrations, SOD activity was not significantly changed. Catalase activity was significantly increased at 10, $100{\mu}g/ml$ concentrations of CF, respectively. TF's catalase activity showed no significant difference from that of the control. Conclusions : These results suggest that CF, as an antioxidant, protects Leydig cells in hydrogen peroxide-induced oxidative stress. know that "Kwangjebikeup" played a role in settlement and spreading of foreign knowledge to civilians.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.2
• /
• pp.157-163
• /
• 2018

In the area around Jeju Island, the squid jigging fishery and the hair-tail angling are popular. Therefore, the study on the characteristics of the formation and shift of fishing grounds is very important. We have received and analyzed AIS data of all vessels around Jeju Island from October 16, 2016 to October 16, 2017, and extracted the positions of the fishing vessels with the same operational characteristics as the fishing vessels of their fisheries. The distribution chart of the frequency of fishing vessels appearing in each predefined fishing grid ($1NM{\times}1NM$) was analyzed. So we took a analogy with the monthly shift of fishing grounds. Many fishing vessels appeared in the seas around Jeju Island from November 2016 to January 2017, and the frequency of their appearance was maintained. In November, however, fishing vessels were mostly concentrated in coastal waters. Yet, the density gradually weakened as they moved into January. From February, the frequency itself began to decline, making it the worst in April. The high concentration of fishing vessels in the waters leading from Jeju Island's northwest coast to south coast in November is believed to be related to the yellowtail fishery that are formed annually in the coastal waters off the island of Marado. In May 2017, the appearance frequency of fishing vessels increased and began to show a concentration in coastal waters around Jeju Island. Fishing vessels began to flock in waters northwest of Jeju Island beginning in July and peaked in August, and by September, fishing vessels were moving south along the coast of Jeju Island, weakening the density and spreading out. Between July and August, fishing vessels were concentrated in waters surrounding Jeju Island, which is believed to be related to the operations of fishing vessels for the squid jigging fishery and the hair-tail angling.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.799-802
• /
• 2008

General behaviors based on hydraulic characteristics of natural streams and channels have been recently analyzed and developed via various numerical models. However in the states of natural hydraulics, an experimental research must be performed simultaneously with the mathematical analysis due to effects of hydraulic properties such as meander, sediment, and so on. In this study based on 2-D advection-dispersion equation, flow and tracer experiments were performed in the S-curved meandering laboratory channel with a rectangular cross-section. The channel was equipped with instrument carriages which was equipped with an auto-traversing system to be used with velocity measuring sensors throughout the depth and breadth of the flow field. To measure concentration distribution of the salt solution was adjusted to that of the flume water by adding methanol and a red dye (KMnO4) was added to aid the visualization of the tracer cloud, the tracer was instantaneously injected into the flow as a full-depth vertical line source by the instantaneous injector and the initial concentration of the tracer was 100,000 mg/l. The secondary current as well as the primary flow pattern was analyzed to investigate the flow distribution in the meandering channels. The velocity distribution of the primary flow for all cases skewed toward the inner bank at the first bend, and was almost symmetric at the crossovers, and then shifted toward the inner bank again at the next alternating bend. Thus, one can clearly notice that the maximum velocity occurs taking the shortest course along the channel, irrespective of the flow conditions. The result of the tracer tests shows that pollutant clouds are spreading following the maximum velocity lines in each cases with various mixing patterns like superposition, separation, and stagnation of pollutant clouds. Flow characteristics in each cases performed in this study can be compared with tracer dispersion characteristics with using evaluation of longitudinal and transverse dispersion coefficients(LDC, TDC). As expected, LDC and TDC in meandering parts have been evaluated with increasing distribution and straight parts have effected to evaluate minimum of LDC and TDC due to symmetric flow patterns and attenuations of secondary flow.

• Korean Journal of Materials Research
• /
• v.33 no.12
• /
• pp.517-524
• /
• 2023

BaTiO₃-Poly vinylidene fluoride (PVDF) solution was prepared by adding 0~25 wt% BaTiO₃ nanopowder and 10 wt% PVDF powder in solvent. BaTiO₃-PVDF film was fabricated by spreading the solution on a glass with a doctor blade. The output performance increased with increasing BaTiO₃ concentration. When the BaTiO₃ concentration was 20 wt%, the output voltage and current were 4.98 V and 1.03 ㎂ at an applied force of 100 N. However, they decreased when the over 20 wt% BaTiO₃ powder was added, due to the aggregation of particles. To enhance the output performance, the generator was poled with an electric field of 150~250 kV/cm at 100 ℃ for 12 h. The output performance increased with increasing electric field. The output voltage and current were 7.87 V and 2.5 ㎂ when poled with a 200 kV/cm electric field. This result seems likely to be caused by the c-axis alignment of the BaTiO₃ after poling treatment. XRD patterns of the poled BaTiO₃-PVDF films showed that the intensity of the (002) peak increased under high electric field. However, when the generator was poled with 250 kV/cm, the output performance of the generator degraded due to breakdown of the BaTiO₃-PVDF film. When the generator was matched with 800 Ω resistance, the power density of the generator reached 1.74 mW/m². The generator was able to charge a 10 ㎌ capacitor up to 1.11 V and turn on 10 red LEDs.