• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.5
• /
• pp.1-14
• /
• 1997

We consider transmission beamforming techniques for frequency-division-duplex (FDD) wireless communication systems using adaptive arrays to improve the signal quality of the array transmission link. We develop a simple effective transmission beamforming technique based on an approximated frequency tranlsation (AFT) to derive the tranmsiion beamforming weights from the uplink channel vector. This technique exploits the invariance of the short-time averaged fast fading statistics to small frequency translations. A simple approximate relationship that relates the transmission channel vector to the reception channel vector is derived. We have developed its practical alternative in which the frequency translation of the channel vector is performed at the principal angle of arrival (AOA) of the u;link synthestic angular spectrum instead of the mean AOA. To analyze the performance of the proposed methods, we consider the power loss incurred by applying the estimated channel vector instead of the true downlink channel vector. The performance is analyzed as a function of the mean AOA, the angular spread, the number of elements, frequncy difference between the uplink and the downlink, and the angle distribution. Their performance is also compared with that of the direct weight reuse method and the AOA based methods.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.339-342
• /
• 2005

In order to support ultrawide-band signal generation for low rate WPAN, several types of signal generation mechanisms are suggested such as Chaos, Impluse, and Chirp signals by the activity of IEEE 802.15.4a. The communication system applied chaos theory may have ultrawide-band characteristics with spread spectrum and immunity from multipath effect. In order to use the advantage of chaotic signal generation, we introduce the system implementation of communication and networking systems with the chaos UWB signal. This system may be composed of mainly three parts in hardware architecture : RF transmission with chaotic signal generation, signal receiver using amplifiers and filters, and 8051 & FPGA unit. The most difficult part is to implement the chaotic signal generator and build transceiver with it. The implementation of the system is devidced into two parts i.e. RF blocks and digital blocks with amplifiers, filters, ADC, 8051 processor, and FPGA. In this paper, we introduce the system block diagram for chaotic communications. Mainly the RF block is important for the system to have good performance based on the chaotic signal generator. And the main control board functions for controlling RF blocks, processing Tx and Rx data, and networking in MAC layer.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.44-50
• /
• 2007

In this paper generating algorithms of the conventional chaos code sequences and a new chaos code sequence derived from the real and imaginary parts of FFT of one chaos code sequence, and the time-frequency function characteristics of generated code sequences to measure the signal resolution, are considered. And two chaos based QCSK digital communication systems-one with two different chaos code sequences, the other with FFT of one chaos code sequence-are analyzed in AWGN and fading communication channels. After analyzing the correlation functions of such sequences, the delta-like autocorrelation and near zero crosscorrelation functions of them are very suitable for chaos based spread spectrum communication systems, is verified. Through evaluating the performance of two chaos based QCSK systems above using Monte-Carlo simulation, the improvement of performance in the latter QCSK system compare favorably with that of the former system, is shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10C
• /
• pp.967-983
• /
• 2003

In wireless spread-spectrum communication systems utilizing PN (pseudo noise) sequences, a variety of noise sources from the channel affect the data reception performance. Among them, in this paper we are concerned with the narrowband interference that may arise from the use of the spectral bands overlapped by the existing narrowband users or the intentional jammers as in military communication. The effect of this interference can be reduced to some extent at the receiver with the PN demodulation by processing gain. It is known, however, that when the interferers are strong, the reduction cannot be sufficient and thereby requiring the extra use of narrowband interference cancellers (NIC's) at the receivers. A class of adaptive NIC's are studied here based on different two cost functions. One is the chip mean-squared error (MSE) computed prior to the PN demodulation and used in the conventional cancellers. Since thses conventional cancellers should be operated at the chip rate, the computational requirements are enormous. The other is the symbol MSE computed after the PN demodulation in which case the weights of the NIC's can be updated at a lot lower symbol rate. To compare the performance of these NIC's, we derive a common measure of performance, i.e., the symbol MSE after the PN demodulation. The analytical results are verified by computer simulation. As a result, it is shown that the cancellation capability of the symbol-rate NIC's are similar or better than the conventional one while the computational complexity can be reduced a lot.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.115-123
• /
• 2018

In this paper, we consider the applicability of time-hopping(TH) systems for anti-jamming(AJ) communication. We first briefly summarize fundamentals of TH systems and several common jamming scenarios that have been considered in the literature. We then analyze the AJ performance of TH systems under those common jamming environments. From our simulation results, we reveal that among narrow band, partial band, broadband, and sweep jamming, partial band and sweep jamming are the best ones from jammer perspective. For the partial band jamming case, we show that the most effective bandwidth ratio and location are 50 % and 2.5-3.5 Ghz, respectively. For the sweep jamming case, we illustrate that the AJ performance of the TH system is enhanced when the sweep duration approaches to the bit duration. In addition, we pointed out that the most efficient jamming bandwidth ratio is 1/2. Finally, our results show that the TH-BPSK system greatly outperforms the TH-PPM counterpart.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.4
• /
• pp.35-43
• /
• 1998

This study has been experimented the characteristics of synchronous oscillator for clock recovery of Direct Sequence/Spread Spectrum(DS/SS) communication. When external wave is not provided, The Synchronous Oscillator(SO) oscillates at its natural frequency. As soon as external signal is applied, the SO starts tracking the external frequency which can be sinusoidal, pulsed or some other waveform. Thus, the output is synchronized with the range of wide tracking bandwidth to the external frequency Specifically, the SO also posses frequency division and multiplication capability. All of these indicate that the SO can overcome difficulties to get synchronization in coherent digital communication systems. We make a practical application of DS/SS communication with study on the synchronous properties of SO. As the result, we have a good performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.258-272
• /
• 2010

The low-rate (LR) UWB is a promising technology for the ubiquitous sensor network (USN) due to its extremely low power consumption and simple transceiver implementation. However the limited communication range is a bottleneck for its widespread use. This paper deals with a new frame structure of class 4 active RFID multi-hop relay system based on ISO/IEC 18000-7 standard integrating with IEEE 802.15.4a LR-UWB PHY layer specification, which sets up a connection to USN. As a result of the vital importance of the coverage and throughput in the application of USN, further we analyze the performance of the proposed system considered both impulse radio UWB (IR-UWB) and chirp spread spectrum (CSS). Our simulation results show that the coverage and throughput are remarkably increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3C
• /
• pp.314-319
• /
• 2010

The chirp spread spectrum (CSS) technique that spreads the data signal over a wider frequency band via chirp signal for transmission has attracted much attention in the field of wireless communications due to capability to resist multipath fading signals. However, there has been little mathematical analysis for the performance of CSS-based communication systems in the multipath fading environments. In this paper, we study the influence of the multipath channel on the direct modulation (DM) scheme with M-ary phase shift keying (MPSK). When a chirp signal is transmitted on the Rayleigh fading channel and affected by additive white Gaussian noise (AWGN), we derive the theoretical performance. From numerical results, it is confirmed that the analytic symbol error rate (SER) agrees closely with the empirical SER.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.1
• /
• pp.47-54
• /
• 2012

Video contents in the mobile environment are processed with the low bit-rate relative to normal video contents due to the consideration of network traffic; hence, it is necessary to protect the copyright of the low bit-rate video contents. The algorithm for watermarking appropriate for the mobile environment should be developed because the performance of the mobile devices is much lower than that of personal computers. This paper suggested the invisible spread spectrum watermarking method to the low bit-rate video contents, considering the low performance of the mobile device in the M-Commerce environment; it also enables to track down illegal users of the video contents to protect the copyright. The robustness of the contents with watermark is expressed with the correlation of extraction algorithm from watermark removed or distorted contents. The results of our experiment showed that we could extract the innate frequencies of M-Sequence when we extracted M-Sequence after compressing the contents with watermark easily. Therefore, illegal users of the contents can be tracked down because watermark can be extracted from the low bit-rate video contents.

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.459-465
• /
• 2014

Visible light communications (VLC) using the intensity modulation of light-emitting diodes (LEDs) provides a new communication medium to overcome the shortage of radio spectrum, and allows reuse of LED lighting infrastructures. Orthogonal frequency-division multiplexing (OFDM) was introduced to VLC for its merits in mitigating the fading effects resulting from delay spread, and in avoiding low-frequency ambient interference. Noise and clipping are two major factors that degrade the performance of OFDM in VLC. A larger signal easily overcomes noise, but experiences impairment by clipping. Therefore, degradation due to clipping has a trade-off relationship with that due to noise, depending on the signal amplitude of OFDM. In this paper, the optimal signal amplitude in the trade-off is obtained by simulation when the dimming and LED intensity are given. The former indicates a user's requirement for lighting, and the latter represents the channel quality. The required LED intensity-to-noise ratio, as the channel quality that guarantees dimming as well as an adequate bit-error rate (BER), is also discussed.