• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.185-193
• /
• 2004

Gibberellin (GA) treatment on fruit stalk was effective in fruit growth but reduced the shelf life of fruit. This study was carried out to improve the shelf life of GA treated fruit. Fruit characteristics were surveyed according to the treatment part and concentration of polyamine in 'Whangkeumbae', 'Yeongsanbae', and 'Chuwhangbae'. GA was treated on fruit stalk at 30 days after flowering and 100, 200, and 300 ppm of polyamine were sprayed on leaves of fruit cluster and canopy at 7 day before harvest. In GA treated fruit, fruit weight was heavier as $10\%$ and fruit hardness was lower as $0.3\~0.5\;kg$ than control in all cultivar, but sugar content and palatability were no difference in each treatment. In morphological characteristics, the distance from pith to epidermis of GA treated fruit was faraway as $42.0\%$. Fruit hardness and palatability of 'Whangkeumbae' was good in the leaves spray on the fruit stalk with 200 ppm and the leaves spray on the canopy with 500 ppm at 30 day after harvest. 'Yeongsanbae' and 'Chuwhangbae' showed the same to the result. So we knew that the effective treatment to improve the storagibility after GA treatment on fruit stalk was the fruit stalk leaves spray with 200 ppm because it needed small amount of polyamine.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.147-152
• /
• 2015

In order to develop the cooling load estimation method in the greenhouse, the cooling load calculation formula based on the heat balance method was constructed and verified by the actual cooling load measured in the fog cooling greenhouse. To examine the ventilation heat transfer in the cooling load calculation formula, we measured ventilation rates in the experimental greenhouse which a cooling system was not operated. The ventilation heat transfer by a heat balance method showed a relatively good agreement. Evaporation efficiencies of the two-fluid fogging system were a range of 0.3 to 0.94, average 0.67, and it showed that they increased as the ventilation rate increased. We measured thermal environments in a fog cooling greenhouse, and calculated cooling load by heat balance equation. Also we calculated evaporative cooling energy by measuring the sprayed amount in the fogging system. And by comparing those two results, we could verify that the calculated and the measured cooling load showed a relatively similar trend. When the cooling load was low, the measured value was slightly larger than calculated, when the cooling load was high, it has been found to be smaller than calculated. In designing the greenhouse cooling system, the capacity of cooling equipment is determined by the maximum cooling load. We have to consider the safety factor when installed capacity is estimated, so a cooling load calculation method presented in this study could be applied to the greenhouse environmental design.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2016

In order to obtain efficient control effect of the pesticide, it is important to ensure uniform adhesion to the desired plant parts at the right time. Pesticide spray method (application technology) is an important factor affecting the efficacy and crops persistent expression. The aim of this study was to develop an efficient system to investigate the coating weight distribution of citrus leaves due to the difference between the nozzle and spray sprinkler system using dithianon used in citrus scab. Other An, engine type sprayer was used as the control. Speed sprayer and different sprinklers were wsed to way the deposit amounts of dithianon on citrus leaves. The test was conducted at the National Institute of Horticultural Herbal Science Citrus Research Station, located in the circle citrus Jeju Island. In order to examine whether the citrus orchard spray and the evenl on the whole, dithianon (43% flowable 1000-fold dilution) was sprayed, filter paper and leaves were analyzed by the height as top, middle, bottom. Speed sprayer the was most effective on depositing at the middle position, of the leaves. All other sprays the leaces except the dry mist sprinkler were not effective enough to deposit on the back sides. To achieve more deposits on the high position leaves, an improve ment in the nozzle and an efficient power system of sprayer were needed.

• The Korean Journal of Pesticide Science
• /
• v.20 no.3
• /
• pp.264-270
• /
• 2016

This study was conducted to compare of the pesticide residue amounts in fruit trees applied by different sprayers and spray volumes. Apple tree was used as a sample tree, and speed sprayer, power sprayer and knapsack motorized sprayer were tested. For similar sprayer and spray volume, the concentration of fluquinconazole and flusilazole in apple leaves were obtained respectively, for speed sprayer 8.33 and 2.15 mg/kg, for power sprayer 4.56 and 1.10 mg/kg, and for knapsack 4.55 and 1.12 mg/kg. The results showed that the treatment using speed sprayer had highest efficiency. The pesticide residues in apple leaves sprayed by 3 different spray volumes (560, 336 and 230 L/10a) using speed sprayer were 10.76 mg/kg, 8.32 mg/kg, 6.04 mg/kg on fluqinconazle and 3.04 mg/kg, 2.14 mg/kg and 1.47 mg/kg on flusilazole, respectively, indicating that the higher the volume, the higher the residues. The results from this study can be used as scientific basis for evaluating the field trial data for pesticide registration and the spray volume setting for fruit trees in Korea.

• Asian Journal of Turfgrass Science
• /
• v.21 no.1
• /
• pp.69-79
• /
• 2007

Incorporating herbicides application into a fertilization program has several benefits including saving time and reducing traffics on the lawn. Premixed products of fertilizers and herbicides are commonly known as Weed & Feed in the lawn-care industry. To compare Weed & Feed with separate applications of fertilizers and herbicides on a Kentucky bluegrass (Poa pratensis L.) lawn, a Weed & Feed 28-3-3, containing 0.64% 2,4-D, 0.31% MCPP, and 0.03% dicamba of active ingredients, was used in this study. The first application was in May, with the second in June or Sept. Herbicides in forms of 2,4-D (LV-4, 4EC), MCPP (4EC), and dicamba (Clarity, 4EC) were applied at rates equal to the amounts in Weed & Feed or at half of the rates. The dominant weed in both locations was common dandelion (Taraxacum officinale Weber.) in 2005 and 2004. A secondary weed was Canada thistle (Cirsium arvense (L.) Scop.) in 2004 and broadleaf plantain (Plantago major L.) in 2005. When applied in May and June, fertilizer plus full rate of herbicides treatment achieved 112.3 and 83.7 days of acceptable turf quality in 2004 and 2005, respectively. During the same period, Weed & Feed resulted in 58.7 and 24.3 days of acceptable turf quality, respectively. Our study showed that Weed & Feed was generally as effective in weed control as the same amount of fertilizer plus half rates of herbicides sprayed although results may vary due to the timing of application. Fertilizer plus full rates of herbicides provided the same or better results of weed control than Weed & Feed.

• Journal of Periodontal and Implant Science
• /
• v.25 no.2
• /
• pp.301-320
• /
• 1995

The purpose of this study was to evaluate a new biodegradable membrane - atelocollagen as a guided tissue regeneration barrier on the dehiscence defects adjacent to the dental implants. 3 beagle dogs were selected for this study and all the mandibular premolars($P_1,P_2,P_3&P_4$) were extracted. Twelve weeks after the extraction, the edentulous ridges were formed to be placed the titanium plasma-sprayed IMZ implants. Four implant osteotomies were performed on each side of the mandible. The osteotomies were placed facially in the edentulous ridges to approximate an actual dehiscence defect as closely as possible, The standardized dehiscence defects were created 3 mm in width and 4 mm in height by osteotomy. A total 24 implants were placed. e-PTFE, ateloco11agen and $Collatape^{(R)}$ were placed to cover the defects and the one defect served as a control, not covered any membrane. By random selection, three dogs were sacrificed at 2 weeks, 4weeks and 8 weeks after fixation with 3% glutaraldehyde. A week before sacrificing, 8-week dog was infused intravenously with oxy-tetracycline 30mg/kg. The left mandibular blocks were used for full decalcified histologic preparation and the right mandibular blocks were selected for undeca1cified preparation, At 2 weeks, the regenerated bone of e-PTFE and atelocollagen groups appeared to be more dense than other groups and the percentage of bone defect fill was highest for e-PTFE and follwed by ateloco1lagen group. However, the $Collatape^{(R)}$ and control groups showed a little new bone formation. $Collatape^{(R)}$ was almost degraded within 2 weeks. At 4 weeks, the regenerated new bone were much greater and denser than at 2 weeks for e-PTFE and ateloco11agen group. Although a part of atelocollagen bagan to be degraded at the margin and surrounded by foreign body giant cells related to foreign body reaction, it was generally intact and the regenerated new bone was shown much more than at 2 weeks. The amount of new bone in $Collatape^{(R)}$ and control groups at 4 weeks were similar to that of 2 weeks group. At 8 weeks, the regenerated bone was matured and observed along the implant fixture. Direct new bone formation and calcium deposits beneath the e-PTFE were observed. No further bone growth was seen in the $Collatape^{(R)}$ and control groups. In reflected fluoromicrcocopic observation, the osteogenic activity was pronounced between e-PTFE membrane and the old bone. High osteogenic activity was also observed in atelocol1agen group. This study suggested that the ateloco11agen as well as e-PTFE could be used for guided tissue regeneration on dehiscence defects adjacent to the dental implants. But the $Collatape^{(R)}$ was completely resorbed within 2 weeks and was not a suitable membrane for guided bone regeneration.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.387-391
• /
• 2010

This research was conducted to get the basic information for improving production amount as well as fruit quality by using Prohaxadion-Calcium (Pro-Ca) used as 'Sato Nishiki', cherry cultivar, which is most frequently cultivated in Korea. In fruiting trees, we used Pro-ca and concentration of treatment selected 150, 200 and $250\;mg{\cdot}L^{-1}$. When treating Pro-Ca $200\;mg{\cdot}L^{-1}$, we could get the highest effect on inhibition of shoot growth. All treatments of Pro-Ca were increased chlorophyll a and b, respectively compared with control. Although treatments of Pro-Ca treatment showed the decreased effect on leaf area and there was no difference in fruit quality among treatments. Also, Pro-Ca $250\;mg{\cdot}L^{-1}$, sprayed 3 times, and pclobutrazol ($PP_{333}$) 500 and $1,000\;mg{\cdot}L^{-1}$, applicated soil, were treated to 1 year old plnted pot. Pro-Ca and $PP_{333}$ showed inhibition of shoot growth, especially, Pro-Ca showed the more effect than $pp_{333}$ on growth inhibition. Soil applications of $pp_{333}$ showed less effect to enlargement of tree trunk compared to Pro-Ca and control. Pro-Ca and $pp_{333}$ were not difference in number of inter-nodes when comparing to control, but they on decreased leaf area and increased chlorophyll.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.834-840
• /
• 2018

In this study, the characteristics of air pollutant emissions from ships' engines have been investigated by conducting E2 and E3 cycle mode tests. A engine 360Ps (Doosan L126TIH engine) and 400kW dynamometer Horiba-Schenck were utilized for engine tests. The FTIR analyzer and SPC were used to measure exhaust gas (NOx, SOx etc.) and PM (particulate matter), respectively. The results showed that the emissions of THC and CO produced from engine were increased with the increase of sulfur content in fuel oils at E2 and E3 cycle modes. The kinetic viscosity of the fuel increased as the sulfur content of the fuel increased, thereby the specific fuel oil consumption (SFC) of the engine improved. This result is considered to be due to improved combustion conditions due to increased average diameters of sprayed particles and due to increased kinetic viscosity under constant fuel injection pressure in this study. In the case of NOx emission, this study showed no significant change in amount of sulfur content.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.581-585
• /
• 1999

The surface treated hydroxypropyl methylcellulose(HPMC) which could adjust the soluble time was synthesized when 40 wt % glyoxal solution and $KH_2PO_4$ were sprayed and reacted. And also, the solution dynamic at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion characteristics at different ratios of two adding agents were identified If the surface of HPMC was treated with only glyoxal, the dispersion was observed in the neutral solution and the viscosity was increased after directly dissolved as the solution become alkali condition. But the fine-powder type of HPMC which reacted with glyoxal and $KH_2PO_4$ was dispersed regardless of pH of solution and observed that it was dissolved and its viscosity increased after elapsing some time. With increasing amount of glyoxal and $KH_2PO_4$, the soluble time was delayed. The reaction condition was about 60 min at $75{\sim}85^{\circ}C$. Especially, the removal process of organic solvent after reaction was not required due to reaction under water solution without organic during glyoxal and $KH_2PO_4$ treatment. And also, the HPMC which could adjust the soluble rate in water or organic solvent by changing the degree of substitution of HPMC was synthesized.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.74-80
• /
• 2010

Emulsification characters were investigated for COY (Cooking oil and Egg Yolk Mixture) and control efficacies of COY was enhanced by supplemented Sulfur wp. against paprika powdery mildews. Amount of water added to one egg yolk and 100 ml olive oil affected tbe homogenization of mixtures to emulsion profoundly; those premixes with 5~10 ml water were too concentrated to be homogenized, hence not dispersible in water; those with 15~20 ml water were homogenized, but tended to flocculation and not readily dispersible in water, suggesting the instability of emulsion; and those with 50 or 100 ml water were homogenized well and was readily dispersible in water to stable emulsion over long period of time. It was further confirmed that those fruits sprayed with not-fully emulsified COY revealed the oily membranes or blotches on their surfaces, whereas the ones with fully emulsified COY revealed normal clean surfaces. Treatment of COY either alone or in supplementation with Sulfur wettable powder (sulfur wp) were also effective in suppressing the recurrence of powdery mildew signs, wbich had disappeared in three days of foliar application. Still, the COYs supplemented with sulfur wp (COY+sulfur wp) at 1,000x or 5,000x were significantly effective in suppression against the symptomlsign recurrence over COY or sulfur wp alone.