• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.373-380
• /
• 2009

The evaporation process of multi-component fuel is different from one of a single component, because the properties of each component affects among the components. In actual engine, the spatial distribution of fuel vapor concentration dominates auto-ignition and initial combustion, and depends on the volatility and diffusivity of each component fuel contained in the multi-component fuel. Then, this study proposes a simplified numerical scheme for analysis of evaporation process of multi-component fuel sprays. Evaporation process is calculated by KIVA-II code based on the simple two-phases region that is approximated by modified saturated liquid-vapor line, which was obtained by connecting the 50% distillation temperature for each component under several pressure fields. Consequently, it can be quantitatively simulated that vapor of low boiling fuel component mostly exists around nozzle and spray tip region, the high boiling duel component, on the other hand, mostly appears near the spray tip.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.943-948
• /
• 2000

The Twin-fluid Swirl Nozzles are used in many parts of the industry to produce homogeneous spray. This study is to investigate the effects of outer air swiller and inner water swiller on atomization of liquid.. The experiment was carried out with increasing air-flow rate at constant liquid-flow rate and with changing outer air swiller angle and inner water swiller angle. A Particle Dynamics Analyzer(PDA) was used to measure drop size, mean and ms values of axial velocity, number density and Sauter mean diameter(SMD). The axial mean velocity and SMD of droplets were measured along the center line and radial directions. It was found that the higher air flow-rate resulted in the smaller Sauter mean diameter of liquid spray and the higher axial mean velocity of droplets. This experimental results will be conveniently used for the preliminary design stage of twin-fluid nozzle development.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.138-142
• /
• 2006

Occupational asthma is commonly known to be induced by isocyanate exposure. Spray painters generally use isocyanates for 2-pack spray painting to coat wooden panel surfaces in the furniture industry in South Australia. Due to a lack of actual exposure data, this study conducted environmental and dermal/ocular monitoring from a company in the furniture industry. According to this study, there was no significant airborne contamination, due to the use of high volume low pressure (HVLP) spray guns, low concentration of hardener in paint solutions and appropriate respirator like full face-air line respirator. There was no significant HDI detection in the general work area around the spray booths. Owing to the use of disposable nitrile gloves during the spray painting, no significant dermal exposure was found. According to color monitoring, there was a possible dermal exposure from surfaces in the workplace, unless either protective gloves were worn or appropriate working practices like clean-up process and storage in a secure places. No eye contamination was detected from the spray painters. No significant exposure levels from inhalational, dermal, ocular were found. The area of most concern was work practices.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.431-434
• /
• 1991

To develop the EHV transmission technology, the electrical environment problems such as Audible Noise etc. have been studied by the use of Corona Cage with artifical water spray equipment. However, this study has difficulties in simulating the amount of natural conditions. Therefore, We will plan to install full scale EHV test line to prove the measuring values of Corona Noise, and to selection of Conductors, Insulators, and to economical design, construction data.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• Journal of ILASS-Korea
• /
• v.20 no.1
• /
• pp.14-19
• /
• 2015

Recently, R&D demand for environmental friendly vehicle has rapidly increased due to its global environmental issues such as global warming, energy and economic crisis. Under this situation, the most realistic alternative way for environmental friendly vehicle is a clean diesel vehicle. The common-rail fuel injection system, as key technology of clean diesel vehicle, consists of a high pressure pump, common-rail, high pressure fuel line and electronic control injector. In common-rail high-pressure fuel injection system, high pressure wave of injection system and geometry of injector elements have a major effects on high-pressure fuel spray. Therefore, in this study, the numerical model was developed for analysis about the common-rail fuel pressure pulsation by using AMESim code. We could secure stability of common-rail high-pressure fuel injection system through optimal design of fuel line.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.406-406
• /
• 2011

결정질 태양전지에서 도핑(Doping)은 반도체(Semiconductor)의 PN 접합(Junction)을 형성하는 중요한 역할을 한다. 도핑은 반도체에 불순물(Dopant)을 주입하는 공정으로 고온에서 진행되며 온도는 중요한 변수(Parameter)로 작용한다. 본 연구에서는 여러 가지 에미터(emitter)층 형성방법 중에 가장 저가이면서 공정과정이 간단하며 대면적 도핑이 용의한 Spray 방법을 통해 효과적인 에미터 층 형성의 최적화를 위해 DI water에 각각 1%, 3%, 5% 7%로 희석된 H3PO4용액 으로 850$^{\circ}C$에서 열처리 시간을 가변해 가며 최적화된 면저항과 표면농도 특성을 분석하였다. 도핑소스가 웨이퍼(wafer) 각각의 표면에 흡착시킨 후 오븐에 넣어 150$^{\circ}C$에서 5분간 건조시킨 후 퍼니스(furance)에 넣어 시간을 가변해 가며 도핑시켰다. Spray 방식은 기존의 방식보다 저렴하고 In-line 공정에 적합하며 대용량으로 전환이 쉽다는 많은 장점을 가지고 있다. 도핑시 먼저 spray를 이용하여 웨이퍼 표면에 균일하게 용액을 흡착시킨 후 오븐에서 150$^{\circ}C$에서 5분간 건조 후 furnace에 넣어 850$^{\circ}C$에서 시간을 가변 해가며 실험하였다. H3PO4용액의 비율이 1%일 때는 2분 이상 열처리를 하였을 때 60${\Omega}/{\Box}$ 이하로 내려가지 않았다. 이는 최초 표면농도가 낮아 더 이상 확산되지 않음을 의미한다. 또한 H3PO4의 비율이 3% 이상일 때는 열처리 시간이 1분 이하일 때 면저항의 변화가 거의 없었으나 2분 이상일 때는 시간에 따라서 점차 낮아졌으며 균일도 역시 좋아졌다. 이는 H3PO4의 비율이 3% 이상일 때는 표면농도가 높아서 1분 이하의 열처리 시간에서는 확산해 들어가는 양이 거의 같음을 알 수 있었다.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.90-92
• /
• 2012

A new spray carnation 'Lepus' was released by the National Institute of Horticultural & Herbal Science in 2004. This hybrid was crossed between 'Diamond' and '99257-7 Line' in 2000. The 269 seedling plants were, planted and cultivated in green house. After investigation of the characteristics for four years (from 2001 to 2004), it was finally selected in 2004. 'Lepus' white color with red peak edge is spray type and strong flower stalks. Also, it has medium fragrance, many flowers, and attractive flower arrangement. In particular, flowering was 10 days early and flower stalk was 13cm longer than 'Diamond' (control). In addition, it has medium resistance of Fusarium and the vase life was similar to 'Diamond'.

• Safety and Health at Work
• /
• v.4 no.4
• /
• pp.216-220
• /
• 2013

A 46-year-old man who had worked as a bumper spray painter in an automobile body shop for 15 years developed lung cancer. The patient was a nonsmoker with no family history of lung cancer. To determine whether the cancer was related to his work environment, we assessed the level of exposure to carcinogens during spray painting, sanding, and heat treatment. The results showed that spray painting with yellow paint increased the concentration of hexavalent chromium in the air to as much as $118.33{\mu}g/m^3$. Analysis of the paint bulk materials showed that hexavalent chromium was mostly found in the form of lead chromate. Interestingly, strontium chromate was also detected, and the concentration of strontium chromate increased in line with the brightness of the yellow color. Some paints contained about 1% crystalline silica in the form of quartz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.539-545
• /
• 2001

Undoped and Co$^{2+}$ $\alpha$-Ga$_2$S$_3$ thin films were grown by spray pyrolysis method. It has been found that these thin films have a monoclinic structure and direct optical energy gap and indirect were located to 3.477eV and 3.123 eV at 10K respectively. In the photoluminescence due to a D0A(donor-acceptor) pair recombination were observed at 502 nm and 671 nm for the $\alpha$-Ga$_2$S$_3$ thin film, where is excited by the 325 nm-line of He-Cd laser. These peaks are identified to be corresponding to the electron transition between the energy levels of Co$^{2+}$ ion sited a the T$_{d}$ symmetry point in the $\alpha$-Ga$_2$S$_3$;Co$^{2+}$ thin film. film.