• Title/Summary/Keyword: spoilage mold

Search Result 20, Processing Time 0.023 seconds

The Prevalence and Control of Spoilage Mold and Yeast in Cheese (치즈에서 부패를 일으키는 효모와 곰팡이의 다양성 및 저감법)

  • Kim, Jong-Hui;Kim, Bu-Min;Jeong, Seok-Geun;Oh, Mi-hwa
    • Journal of Dairy Science and Biotechnology
    • /
    • v.35 no.3
    • /
    • pp.152-161
    • /
    • 2017
  • Cheese is an excellent substrate for yeast and mold growth. These organisms can cause cheese spoilage, resulting in significant food wastage and economic losses. In the context of cheese spoilage, the presence and effects of spoilage or pathogenic bacteria are well documented. In contrast, although yeasts and molds are responsible for much dairy food wastage, only a few studies have examined the diversity of spoilage fungi. This article reviews the spoilage yeasts and molds affecting cheeses in various countries. The diversity and number of fungi present were found to depend on the type of cheese. Important fungi growing on cheese include Candida spp., Galactomyces spp., Debaryomyces spp., Yarrowia spp., Penicillium spp., Aspergillus spp., Cladosporium spp., Geotrichum spp., Mucor spp., and Trichoderma spp.. In addition, several mold spoilage species, such as Aspergillus spp. and Penicillium spp., are able to produce mycotoxins, which may also be toxic to humans. There are many ways to eliminate or reduce toxin levels in foods and feeds. However, the best way to avoid mycotoxins in cheese is to prevent mold contamination since there are limitations to mold degradation or detoxifications in cheese. Chemical preservatives, natural products, and modified atmosphere packaging have been used to prevent or delay mold spoilage and improve product shelf life and food safety.

A Study on Yeast and Mold Contamination of Fermented Milk Products in Korea (우리나라 유산균 제품의 Yeast, Mold 오염에 관한 조사연구)

  • 홍종해
    • Journal of Environmental Health Sciences
    • /
    • v.7 no.1
    • /
    • pp.51-57
    • /
    • 1981
  • This Study was carried out to investigate yeast and mold contamination in fermented milk products produced by 9 different domestic manufacturers from October 20. to December 5. 1980 The results obtained in the study were as follows 1) pH values of the products were ranged from pH 3.14 to pH 4.20 and average of sour milk drinks was pH $3.66\pm 0.19$ and fermented milks pH $3.74\pm 0.11$. Therefore the difference of pH average among sour milk drinks and fermented milks was statistically significant. (p<0.01) 2) In case of yeast contamination, yeast was found on all the four producted at the same date. From this result, it seemed that yeast contamination occured during the manufacturing progress. 3) Degree of contamination by the indicator organisms was E. coli positive, 3.7%: over 1,000 yeasts/ml, 14.8% over 10 molds/ml, 0.9%. 4) In the range of over 1,000 yeasts/ml, degree of contamination by yeast was 8.4% in fermented milk and 16.7% in sour milk drink. 5) Yeasts in product C increased to the spoilage number within 5 days and in H increased within 10 days at 5C. At 15$\circ$C, yeast increased to the spoilage number within 15 days in product A.D. 6) It seems that the yeast number of initial contamination should be important than the increase rate as criteria on the fermented Milk products.

  • PDF

A microbiological investigation of Omija (Schizandra chinesis Baillon) tea spoilage during storage (오미자차액 저장시의 부패와 이에 관여하는 미생물에 관한 연구)

  • 이효선;경규항;유양자;박승애
    • Korean journal of food and cookery science
    • /
    • v.4 no.1
    • /
    • pp.41-46
    • /
    • 1988
  • Omija tea with a pH range of 2.8~3.0 was stored at $25^{\circ}C$ to study its spoilage due to microbial growth. Titratable acidity was increasing during the storage period in the tea stored with the Omija fruits but not in removed of the fruits after extraction. Microbial cells began to show up earlier in the tea without the fruits than that with the fruits. Four strains of yeasts and a strain of mold were isolated from spoiled Omija tea. Morphological, cultural and physiological characteristics of yeasts were investigated and the yeasts were identified as Rhodotorula rubra, Saccharomyces kluyveri, Cryptococcus hungaricus and Candida humicola. Morphological characteristics of the isolated mold was observed and the mold was identified as Mucor circinelloides f. janssenii.

  • PDF

Suppression of Green and Blue Mold in Postharvest Mandarin Fruit by Treatment of Pantoea agglomerans 59-4

  • Yu, Sang-Mi;Kim, Yong-Ki;Nam, Hyo-Song;Lee, Young-Kee;Lee, Seung-Don;Lee, Kui-Jae;Lee, Yong-Hoon
    • The Plant Pathology Journal
    • /
    • v.26 no.4
    • /
    • pp.353-359
    • /
    • 2010
  • In order to control postharvest spoilage of satsuma mandarin fruits, rhizobacteria were isolated from soil samples. The Pantoea agglomerans strain 59-4 (Pa 59-4) which suppresses the decay of mandarin fruit by green and blue mold, was tested for the control efficacy and its mode of action was investigated. Pa 59-4 inhibited infection by green and blue mold on wounded mandarins, which were artificially inoculated with a spore suspension of Penicillium digitatum and P. italicum with control efficacies of 85-90% and 75-80%, respectively. The biocontrol efficacy was increased by raising the concentration of cells to between $10^8$ and $10^9\;cfu/ml$, and pretreatment with the antagonist prevented subsequent infection by green mold. The population of Pa 59-4 was increased more than 10 fold during the 24 hr incubation at $20^{\circ}C$, indicating that colonization of the wound site might prevent the infection by green mold. Despite poor antifungal activity, the Pa 59-4 isolate completely inhibited the germination and growth of P. digitatum spores at $1{\times}10^8\;cfu/ml$. We argue that the control efficacy was mediated by nutrient competition. Overall, the effective rhizobacterium, Pa 59-4, was shown to be a promising biocontrol agent for the postharvest spoilage of mandarin fruits by green and blue mold.

Gamma-Irradiation Provides Microbiological Protection While Maintaining Sensory Quality Change of Fresh Kale Juice During Storage

  • Kim, Jee-youn;Song, Kyung-Bin
    • Preventive Nutrition and Food Science
    • /
    • v.8 no.1
    • /
    • pp.89-92
    • /
    • 2003
  • The effect of gamma-irradiation on microbiological growth in kale juice during storage was studied. Fresh kale juice was prepared and irradiated at 0, 1, 3, 5, 7, 10, and 15 kGy. D values for total bacteria, yeast and mold, Salmonella, E. coli, and Pseudomonas were 3.6, 4.0, 3.2, 1.4, and 1.6 kGy, respectively. E. coli and Pseudomonas were eliminated completely at 5 and 7 kGy, respectively. Gamma-irradiation also reduced total viable bacteria during storage. Therefore, these results indicate gamma-irradiation can prevent microbial spoilage of fresh kale juice by inactivating pathogenic microorganisms.

Biology and Health Aspects of Molds in Foods and the Environment

  • Bullerman, Lloyd-B.
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.22 no.3
    • /
    • pp.359-366
    • /
    • 1993
  • Molds are eucaryotic, multicellular, multinucleate, filamentous organisms that reproduce by forming asexual and sexual spores. The spores are readily spread through the air and because they are very light-weight and tend to behave like dust particles, they are easily disseminated on air currents. Molds therefore are ubiquitous organisms that are found everywhere, throughout the environment. The natural habitat of most molds is the soil where they grow on and break down decaying vegetable matter. Thus, where there is decaying organic matter in an area, there are often high numbers of mold spores in the atmosphere of the environment. Molds are common contaminants of plant materials, including grains and seeds, and therefore readily contaminate human foods and animal feeds. Molds can tolerate relatively harsh environments and adapt to more severe stresses than most microorganisms. They require less available moisture for growth than bacteria and yeasts and can grow on substrates containing concentrations of sugar or salt that bacteria can not tolerate. Most molds are highly aerobic, requiring oxygen for growth. Molds grow over a wide temperature range, but few can grow at extremely high temperatures. Molds have simple nutritional requirements, requiring primarily a source of carbon and simple organic nitrogen. Because of this, molds can grow on many foods and feed materials and cause spoilage and deterioration. Some molds ran produce toxic substances known as mycotoxins, which are toxic to humans and animals. Mold growth in foods can be controlled by manipulating factors such as atmosphere, moisture content, water activity, relative humidity and temperature. The presence of other microorganisms tends to restrict mold growth, especially if conditions are favorable for growth of bacteria or yeasts. Certain chemicals in the substrate may also inhibit mold growth. These may be naturally occurring or added for the purpose of preservation. Only a relatively few of the approximately 100,000 different species of fungi are involved in the deterioration of food and agricultural commodities and production of mycotoxins. Deteriorative and toxic mold species are found primarily in the genera Aspergillus, Penicillium, Fusarium, Alternaria, Trichothecium, Trichoderma, Rhizopus, Mucor and Cladosporium. While many molds can be observed as surface growth on foods, they also often occur as internal contaminants of nuts, seeds and grains. Mold deterioration of foods and agricultural commodities is a serious problem world-wide. However, molds also pose hazards to human and animal health in the form of mycotoxins, as infectious agents and as respiratory irritants and allergens. Thus, molds are involved in a number of human and animal diseases with serious implication for health.

  • PDF

Antimicrobial Activity of Green Tea against Putrefactive Microorganism in Steamed Bread (빵 부패미생물에 대한 녹차의 항균작용)

  • 김창순;정순경;오유경;김래영
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.32 no.3
    • /
    • pp.413-417
    • /
    • 2003
  • To evaluate the antimicrobial activity of green tea against putrefactive microorganism in steamed bread, antibacterial activity of green tea extract against well-known strains of spoilage bacteria (Bacillus subtilis ATCC 6633, Bacillus pulmilus KCTC 3348 and Bacillus cereus IFO 12113) and mold (Aspergillus niger KCCM l1239) in bread was determined using the paper disk method. The green tea extract (GTE) showed the inhibition effects on the growth of all the strains of bacteria and mold at 1, 2, 3% levels. The activity of GTE was stable in the wide range of pH (4~9) and temperature (50~20$0^{\circ}C$). When green tea powder (GTP: 1, 3, 5%) was added to steamed bread increase of total bacterial and mold counts declined during storage at 25"C as the levels of GTP increased. By addition of 5% GTP, mold appeared 1 day late extending shelf life of steamed bread compared to control bread without GTP. Therefore, the levels of GTP added to steamed bread could be more than 5% for extended shelf life and wholesomeness of steamed bread.read.

Sterilization and storage of dried fishes by irradiation (방사선에 의한 건어물의 살균 및 저장에 관한 연구)

  • 임국이
    • Journal of the Korean Home Economics Association
    • /
    • v.23 no.2
    • /
    • pp.37-43
    • /
    • 1985
  • The effect of irradiation at dose of 3~10 kGy on the extension of the shelf-life of sliced dried squid and dried file and on its quality were investigated during nine months of storage at room temperature. The number of microorganisms, TBA value and TMA-N content were used as objective indices concerned to the sensory evaluation. In the number of initial microbial loading, total bacterial count of sliced dried squid and dried file fish were $2.7{\times}10^{8}\;and\;2.0{\times}10^{5}$, yeast and mold were $5.7{\times}10^{5}\;and\;6.2{\times}10^{5}$ and coliform group were $2.1{\times}10^{5}$ and above 10 per gram of the samples, respectively. The number of total bacteria was sterilized by 99% with irradiation of 3~10 kGy and irradiation of above 7 kGy was shown to be effective for the radurization of yeast, mold and coliform group. TBA value of irradiated groups were higher than storage time. The TMA-N content of nonirradiated group was markedly increased by microbial spoilage during storage, however above 8 kGy irradiated group were indicated about 10 mg% after nine months storage. In the sensory evaluation, the nonirradiated group was off favor after three months storage and was changed in color of dried fishes but 7~10 kGy irradiated group were maintained good qualit compared with those of fresh samples after nine months storage at room temperature.

  • PDF

Influence of microbial additive on microbial populations, ensiling characteristics, and spoilage loss of delayed sealing silage of Napier grass

  • Cai, Yimin;Du, Zhumei;Yamasaki, Seishi;Nguluve, Damiao;Tinga, Benedito;Macome, Felicidade;Oya, Tetsuji
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.33 no.7
    • /
    • pp.1103-1112
    • /
    • 2020
  • Objective: To measure whether a microbial additive could effectively improve the fermentation quality of delayed-sealing (DS) silage, we studied the effects of inoculants of lactic acid bacteria (LAB) and cellulase enzyme on microbial populations, ensiling characteristics, and spoilage loss of DS silage of Napier grass in Africa. Methods: Quick-sealing (QS) and DS silages were prepared with and without LAB (Lactobacillus plantarum) inoculant, cellulase enzymes, and their combination. The QS material was directly chopped and packed into a bunker silo. The DS material was packed into the silo with a delay of 24 h from harvest. Results: In the QS silage, LAB was dominant in the microbial population and produced large amounts of lactic acid. When the silage was treated with LAB and cellulase, the fermentation quality was improved. In the DS silage, aerobic bacteria and yeasts were the dominant microbes and all the silages were of poor quality. The yeast and mold counts in the DS silage were high, and they increased rapidly during aerobic exposure. As a result, the DS silages spoiled faster than the QS silages upon aerobic exposure. Conclusion: DS results in poor silage fermentation and aerobic deterioration. The microbial additive improved QS silage fermentation but was not effective for DS silage.

Effects of Storage Duration and Temperature on the Chemical Composition, Microorganism Density, and In vitro Rumen Fermentation of Wet Brewers Grains

  • Wang, B.;Luo, Y.;Myung, K.H.;Liu, J.X.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.27 no.6
    • /
    • pp.832-840
    • /
    • 2014
  • This study aimed to investigate the effects of storage duration and temperature on the characteristics of wet brewers grains (WBG) as feeds for ruminant animals. Four storage temperatures ($5^{\circ}C$, $15^{\circ}C$, $25^{\circ}C$, and $35^{\circ}C$) and four durations (0, 1, 2, and 3 d) were arranged in a $4{\times}4$ factorial design. Surface spoilage, chemical composition and microorganism density were analyzed. An in vitro gas test was also conducted to determine the pH, ammonia-nitrogen and volatile fatty acid (VFA) concentrations after 24 h incubation. Surface spoilage was apparent at higher temperatures such as $25^{\circ}C$ and $35^{\circ}C$. Nutrients contents decreased concomitantly with prolonged storage times (p<0.01) and increasing temperatures (p<0.01). The amount of yeast and mold increased (p<0.05) with increasing storage times and temperatures. As storage temperature increased, gas production, in vitro disappearance of organic matter, pH, ammonia nitrogen and total VFA from the WBG in the rumen decreased (p<0.01). Our results indicate that lower storage temperature promotes longer beneficial use period. However, when storage temperature exceeds $35^{\circ}C$, WBG should be used within a day to prevent impairment of rumen fermentation in the subtropics such as Southeast China, where the temperature is typically above $35^{\circ}C$ during summer.