• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.6
• /
• pp.75-81
• /
• 2013

In this paper, protection coordination between residual current devices and surge protective devices in low-voltage consumer's distribution systems are presented. In the case that a surge protrctive device(SPD) is located on the load side of an residual current device(RCD), when the surge is injected from the source side of the RCD, most of injected surge currents are split into the RCD and the protection coordination between the SPD and RCD is improper, three of 6 specimens experience unintended operation due to test impulse currents. Also when the surges is injected from the load side, a lot of the surge currents is split into the SPD, but a half of test specimens causes nuisance trip. Coordination between SPD and RCD is not valid. When installing SPD, it is important to select SPD after due consideration of the protection voltage level of metal oxide varistor embedded in RCD. It is expected that the results obtained from this work could be useful to improve the protection effects of SPD in low-voltage distribution systems.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.301-309
• /
• 2017

In this paper, we propose a parallelization method for a High Efficiency Video Coding (HEVC) deblocking filter with transform unit (TU) split information. HEVC employs a deblocking filter to boost perceptual quality and coding efficiency. The deblocking filter was designed for data-level parallelism. In this paper, we demonstrate a method of distributing equal workloads to all cores or threads by anticipating the deblocking filter complexity based on the coding unit depth and TU split information. We determined that the average time saving of our proposed deblocking filter parallelization method has a speed-up factor that is 2% better than that of the uniformly distributed parallel deblocking filter, and 6% better than that of coding tree unit row distribution parallelism. In addition, we determined that the speed-up factor of our proposed deblocking filter parallelization method, in terms of percentage run-time, is up to 3.1 compared to the run-time of the HEVC test model 12.0 deblocking filter with a sequential implementation.

• Journal of IKEEE
• /
• v.11 no.4
• /
• pp.331-339
• /
• 2007

The problem of architecting a reliable transport system across an overlay network using split TCP connections as the transport primitive is mainly considered. The considered overlay network uses the application-level switch in each intermediate host. We first argue that natural designs based on store-and-forward principles that are maintained by split TCP connections of hop-by-hop approaches. These approaches in overlay networks do not concern end-to-end TCP semantics. Then, a new transport protocol-Overlay Transport Protocol (OTP)-that manages the end-to-end connection and is responsible for the congestion/flow control between source host and destination host is proposed. The proposed network model for the congestion and flow control mechanisms uses a new window size-Ownd-and a new timer in the source host and destination host. We validate our analytical findings and evaluate the performance of our OTP using a prototype implementation via simulation.

• Nuclear Engineering and Technology
• /
• v.41 no.7
• /
• pp.885-892
• /
• 2009

This manuscript will discuss a numerical method where the six equations of two-phase flow, the solid heat conduction equations, and the two equations that describe neutron diffusion and precursor concentration are solved together in a tightly coupled, nonlinear fashion for a simplified model of a nuclear reactor core. This approach has two important advantages. The first advantage is a higher level of accuracy. Because the equations are solved together in a single nonlinear system, the solution is more accurate than the traditional "operator split" approach where the two-phase flow equations are solved first, the heat conduction is solved second and the neutron diffusion is solved third, limiting the temporal accuracy to $1^{st}$ order because the nonlinear coupling between the physics is handled explicitly. The second advantage of the method described in this manuscript is that the time step control in the fully implicit system can be based on the timescale of the solution rather than a stability-based time step restriction like the material Courant limit required of operator-split methods. In this work, a pilot code was used which employs this tightly coupled, fully implicit method to simulate a reactor core. Results are presented from a simulated control rod movement which show $2^{nd}$ order accuracy in time. Also described in this paper is a simulated rod ejection demonstrating how the fastest timescale of the problem can change between the state variables of neutronics, conduction and two-phase flow during the course of a transient.

• Korean Parent-Child Health Journal
• /
• v.2
• /
• pp.64-82
• /
• 1999

This study was conducted to test the reliability and validity of Maternal Self-Report Inventory that was developed by Shea and Tronick for measuring maternal self-esteem. The subjects were 154 mothers. The construct validity for the scale was tested by factor analysis with five factor loading solution based on the previous study. One item was excluded because total-item correlation was too low, so that the number of total items were twenty-five, the analysis yielded five well defined factors: confidence on the maternal role, general ability of maternal role, caretaking ability, readiness on maternal role, and feeling on the pregnancy and deli very. These five factors explained 52.38% of the variance in the maternal self-esteem. Maternal self-esteem was not affected by maternal age, educational level, occupation, religion, delivery type, or parity. The reliability of the scale was determined with Cronbach's alpha coefficient and Guttman split-half coefficient. Cronbach's alpha was .82, for 26 items, and .83 if one item was deleted. Guttman split-half cofficient was .75. In subscale analysis, Cronbach's alpha was .63~.84. In conclusion. Maternal Self-Report Inventory showed a high degree of validity and reliability, suitable in Korean mothers for measuring maternal self-esteem. In the further study, it would be necessary to compare the maternal self-esteem between mothers with normal babies and premature babies, for confirming the criterion-related validity of the inventory.

• Advances in concrete construction
• /
• v.3 no.1
• /
• pp.55-69
• /
• 2015

Tailing Material (TM) and Fly Ash (FA) are obtained as waste products from the mining and thermal industries. Studies were carried out to explore the possibility of utilizing TM as a part replacement to fine aggregate and FA as a part replacement to cement, in concrete mixes. The effect of replacing fine aggregate by TM and cement by FA on the standard sized specimen for compressive strength, split tensile strength, and flexural strengths are evaluated in this study. The concrete mix of M40 grade was adopted with water cement ratio equal to 0.40. Concrete mix with 35% TM and 65% natural sand (TM35/S65) has shown superior performance in strength as against (TM0/S100, TM30/S70, TM40/S60, TM50/S50, and TM60/S40). For this composition, studies were performed to propose the optimal replacement of Ordinary Portland Cement (OPC) by FA (Replacement levels studied were 20%, 30%, 40% and 50%). Replacement level of 20% OPC by FA, has shown about 0-5% more compressive strength as against the control mix, for both 28 day and 56 days of water curing. Interestingly results of split tensile and flexural strengths for 20% OPC replaced by FA, have shown strengths equal to that of no replacement (control mix).

• Korea Trade Review
• /
• v.47 no.5
• /
• pp.321-336
• /
• 2022

The purpose of this study aims to investigate how consumer awareness and purchasing behavior are affected by the type of animosity against the nation. This study classified animosity into three categories: sociocultural, economic, and war-based. Additionally, the consumer's cognition toward animosity was split into two categories-empathic concernt and personal distress-and the direction of consumption behavior was split into two categories-individual brand avoidance behavior and collective bandwagon behavior. The concept of Fear of Missing Out (FoMO) was introduced for the direction of consumption behavior, further validating the moderating impact. Structural equation modeling method was used to measure the general consumption behvior of Korean consumers' animosity. The results were analyzed using a total of 279 samples. As a result, animosity motivated by war and by economics had a substantial impact on empathic concern, while animosity motivated by socioculture had a significant impact on personal distress. Personal distress had a good impact on an individual's brand antipathy behavior, which in turn led to brand dislike and avoidance. Empathic concern also had a positive impact on the phenomena of group sympathy, which leads to identification of conduct and social conformity. Also, it was proven that the group that had a high level of FoMO reacted strongly to the phenomenon of group collective behavior.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.4
• /
• pp.405-412
• /
• 2012

After the spatial discrepancy between SLI(Street-Level Imagery) and vector map is removed by their conflation, the corresponding building regions can be found based on SLI parameters. The building region correspondence, however, is not perfect even after the conflation. This paper aims to improve the correspondence of building regions by region splitting of an SLI. Regions are initialized by the seed lines, projection of building objects onto SLI scene. First, sky images are generated by filtering, segmentation, and sky region detection. Candidates for split lines are detected by edge detector, and then images are splitted into building regions by optimal split lines based on color difference and sky existence. The experiments demonstrated that the proposed region splitting method had improved the accuracy of building region correspondence from 83.3% to 89.7%. The result can be utilized effectively for enhancement of SLI services.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.3
• /
• pp.110-114
• /
• 2007

Dependence of the thermal stability of nickel silicide on the film stress of inter layer dielectric (ILD) layer has been investigated in this study and silicon nitride $(Si_3N_4)$ layer is used as an ILD layer. Nickel silicide was formed with a one-step rapid thermal process at $500^{\circ}C$ for 30 sec. $2000{\AA}$ thick $Si_3N_4$ layer was deposited using plasma enhanced chemical vapor deposition after the formation of Ni silicide and its stress was split from compressive stress to tensile stress by controlling the power of power sources. Stress level of each stress type was also split for thorough analysis. It is found that the thermal stability of nickel silicide strongly depends on the stress type as well as the stress level induced by the $Si_3N_4$ layer. In the case of high compressive stress, silicide agglomeration and its phase transformation from the low-resistivity nickel mono-silicide to the high-resistivity nickel di-silicide are retarded, and hence the thermal stability is obviously improved a lot. However, in the case of high tensile stress, the thermal stability shows the worst case among the stressed cases.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.111-123
• /
• 2005

A network design model has been proposed. which represents a transportation facility investment decision problem. The model takes the discrete hi-level programming form in which two types of decision makers, government and travelers, are involved. The model is characterized by its ability to address the total social costs occurring in transportation networks and to estimate the equilibrium link volumes in multi-modal networks. Travel time and volume for each link in the multi-modal network are predicted by a joint modal split/traffic assignment model. An efficient solution algorithm has been developed and an illustrative example has been presented.