• Journal of applied mathematics & informatics
• /
• 제34권5_6호
• /
• pp.467-478
• /
• 2016

In this paper, we propose an Ishikawa-type extra-gradient iterative algorithm for finding a solution of split feasibility, fixed point problems and equilibrium problems of quasi-nonexpansive mappings. It is proven that under suitable conditions, the sequences generated by the proposed iterative algorithms converge weakly to a solution of the split feasibility, fixed point problems and equilibrium problems. An example is given to illustrate the main result of this paper.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2162-2167
• /
• 2009

A Low cost and variable speed brushless motor drive system with single switch per phase is presented. The motor drive is realized with a novel two-phase flux-reversal-free switched reluctance motor and a split AC two switch converter. The strategy of the controller and the converter for its realization are described. Comparisons between a split AC converter, asymmetric converter, split DC converter, single controllable switch converter, and N+1 converter are performed for its device rating, cost, switching losses and conduction losses, and converter efficiency. The split AC converter is analyzed and simulated to verify the characteristics of the converter circuitry and control feasibility and the simulation results are presented. The efficiency with various loads is numerically estimated and experimentally compared from viewpoint of subsystem and system in details. The focus of this paper is to compare the presented motor drive system to the asymmetric converter system throughout experiments and demonstrate single switch per phase converter having comparable efficiency as the asymmetric converter system.

• Nonlinear Functional Analysis and Applications
• /
• 제26권3호
• /
• pp.451-474
• /
• 2021

In this paper, we investigate a hybrid algorithm for finding zeros of the sum of maximal monotone operators and Lipschitz continuous monotone operators which is also a common fixed point problem for finite family of relatively quasi-nonexpansive mappings and split feasibility problem in uniformly convex real Banach spaces which are also uniformly smooth. The iterative algorithm employed in this paper is design in such a way that it does not require prior knowledge of operator norm. We prove a strong convergence result for approximating the solutions of the aforementioned problems and give applications of our main result to minimization problem and convexly constrained linear inverse problem.

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.418-423
• /
• 2016

Background Skin grafting is a relatively simple and thus widely used procedure. However, the elastic and structural quality of grafted skin is poor. Recently, various dermal substitutes have been developed to overcome this disadvantage of split-thickness skin grafts. The present study aims to determine the feasibility of RapiGraft as a new dermal substitute. Methods This prospective study included 20 patients with partial- or full-thickness skin defects; the patients were enrolled between January 2013 and March 2014. After skin defect debridement, the wound was divided into two parts by an imaginary line. Split-thickness skin grafting alone was performed on one side (group A), and RapiGraft and split-thickness skin grafting were used on the other side (group B). All patients were evaluated using photographs and self-questionnaires. The Manchester scar scale (MSS), a chromameter, and a durometer were used for the scar evaluation. The average follow-up period was 6 months. Results The skin graft take rates were 93% in group A and 89% in group B, a non-significant difference (P=0.082). Statistically, group B had significantly lower MSS, vascularity, and pigmentation results than group A (P<0.05 for all). However, the groups did not differ significantly in pliability (P=0.155). Conclusions The present study indicates that a simultaneous application of RapiGraft and a split-thickness skin graft is safe and yields improved results. Therefore, we conclude that the use of RapiGraft along with skin grafting will be beneficial for patients requiring reconstructive surgery.

• Nonlinear Functional Analysis and Applications
• /
• 제29권4호
• /
• pp.1149-1172
• /
• 2024

In this paper, we investigate a self adaptive accelerated method for solving split common fixed point problem for a finite family of firmly-nonexpansive type mappings (Type P) and monotone variational inclusion problem in p-uniformly convex and uniformly smooth Banach spaces. Using a modified Halpern method together with an inertial extrapolation method, we prove a strong convergence theorem for solving the aforementioned problems. The implementation of our iterative method does not require prior knowledge of the operator norm. We also provide some numerical examples to show better performance of our method. Our results extend and complement many related results existing in the literature.

• 한국강구조학회 논문집
• /
• 제24권5호
• /
• pp.511-520
• /
• 2012

상 하부 스플릿 T 접합부는 부분강접 접합부의 한 형태로 접합부에 사용된 T-stub의 두께 및 고력볼트 게이지 거리 변화에 따라서 충분한 휨강도를 갖는다. 뿐만 아니라 상 하부 스플릿 T 접합부는 강재의 종류, 보 및 기둥의 규격, 접합부 형상 등의 조합에 의하여 보통모멘트골조 혹은 특수모멘트골조에 적용 가능한 충분한 연성능력을 갖는 내진접합부로 설계 및 시공 된다. 그러나 이러한 상 하부 스플릿 T 접합부에 대한 국내의 연구는 아직 미흡한 상황이며 적합한 설계식의 제안도 이루어지고 있지 않다. 그러므로 상 하부 스플릿 T 접합부의 국내 적용을 위해서는 많은 실험 및 해석적 연구가 필요한 상황이다. 따라서 이 연구는 FEMA의 상 하부 스플릿 T 접합부에 대한 설계식을 검토하고 국내의 적용 가능성을 타진하고자 진행하였다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제51권1호
• /
• pp.59-66
• /
• 2025

Xanthomas are benign lesions characterized by the aggregation of lipid-laden histiocytes and foamy cells within tissues. Intraosseous xanthomas (IOXs), especially those in the jaw bone, are rare, with only around 50 cases documented. This case report describes an IOX located at an osteotomy site in the mandible during sagittal split ramus osteotomy (SSRO). Preoperative radiographs revealed a heterogenic radiolucent-radiopaque lesion in the right ramus. After meticulous curettage of the lesion, proximal and distal segments were fixed in the semi-rigid plates and screws. At the one-year follow-up, radiographs showed excellent bony union between proximal and distal segments, with no significant interval change. IOXs rarely occur in the jaw. However, their predilection for the posterior mandible suggests that such lesions can be encountered during orthognathic surgery. This report demonstrates the feasibility of performing SSRO directly through the lesion with concurrent curettage without compromising surgical outcomes. This case will contribute to the limited literature on IOX of the jaw bone and its treatment via SSRO as a feasible surgical option in concomitant orthognathic surgery.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.311-318
• /
• 2017

This paper investigates the utilization of waste tyre crumb rubber as the fine aggregate in precast concrete Paving block (PCPB). PCPB's are generally preferred for city roads, pedestrian crosswalk, parking lots and bus terminals. The main aim of this paper is to evaluate the mechanical properties of wet cast PCPB containing waste tyre crumb rubber. The mechanical properties were investigated using a density, compressive strength, split tensile strength and flexural strength tests at 7, 28 56 days according to the IS 15688:2006 and EN1338. The wet cast method was followed for producing PCPB samples. The fine aggregate (river sand) was replaced with waste tyre crumb in percentage of 5%, 10%, 15%, 20% and 25% by volume. All the test results were compared with the conventional PCPB (Without rubber). The test results indicate its feasibility for incorporating waste tyre crumb rubber in the production of PCPB by the wet cast method.

• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.679-684
• /
• 2014

Enhanced analysis is performed to design a wedge projection system with a slab structure that increases the projected image size. The specification values of the system such as the length of the slab structure and the imaging region are calculated and investigated using an optical simulation tool. We also propose a split imaging region method to represent a large tiled scene using the thin wedge waveguide structure. Experiments are performed to verify the feasibility of the proposed method.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.554-559
• /
• 2003

A newly developed contact angle measurement instrument by laser beam projection allows for rapid and direct determination of contact angles. The instrument may have a possibility to characterize newly developed nano-fibers. When the laser beam impinges on an edge of an interface of liquid and solid, projected beam were split across and made two straight lines on a tangent screen. From the result, it could measure the contact angle directly by reading the angle between two split beams. The purpose of this study was to prove reliability and reproducibility of the contact angle measurement instrument by laser beam projection compare to the conventional one by microscope through the comparative experiment and questionnaire. Test samples were selected by consideration of hydrophilic and hydrophobic, such as nylon 6 and polypropylene, respectively. The laser contact angle measurement has accurate, fast and convenient method to measure contact angle, and it can be a unique method to characterize nano-fibers.