• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.181-192
• /
• 1997

The difficulty of endodontic retreatment depends on various factors and it is affected by retention of post. In this experiment, root canal therapy was done in extracted human teeth and cut into 10mm length from the root apex, and then cemented by zinc phosphate cement, Vitremer$^{(R)}$(glass ionomer) luting cement and Panavia 21$^{(R)}$(resin cement). Post preparation was done by #4 Parapost drill at 6mm length and cement was inserted by lentulo spiral. After 24 hours, tensile bond strength, post removal time was measured after the ultrasonic application and the separation site was measured. The following results were obtained. 1. In measuring tensile bond strength, there is no statistical difference between zinc phosphate cement and Panavia 21$^{(R)}$, but Vitremer$^{(R)}$ showed lower value compared with those two cements. (p<0.001) 2. When the post removal time was measured after ultrasonic application, significant different value in order of Panavia 21$^{(R)}$, zinc phosphate cement and Vitremer$^{(R)}$ was shown. (p<0.001) 3. As a result of examining the separating site of each cement, all 16 of zinc phosphate cement group showed the fracture site between cement and post, Vitremer$^{(R)}$ was 13/16, and Panavia 2$^{(R)}$ was 8/16. In case of tooth restoration using Parapost, the use of Panavia 21 showed good retention property than Vitremer$^{(R)}$, but when retreatment is needed the difficulty of post removal will be increased.

• Journal of Veterinary Clinics
• /
• v.28 no.3
• /
• pp.336-338
• /
• 2011

A 5-day-old male Korean native calf was referred with the primary complaint of anorexia, absence of feces, depression, and abdominal distention. Although this case was tentatively diagnosed as atresia coli, plain and contrast radiography was performed to confirm site and appearance of obstruction. A plain radiograph revealed gas distension in the large intestine, with absence of fecal material in the descending colon. In a contrast radiograph, the blind part of descending colon that was accumulated with contrast media smoothly protruded to distended colon with gas and the middle part was seen as narrow. These findings were well corresponded with the mucosal blockage junction between distended spiral loop with gas and descending colon that was hypoplasia or atropy in necropsy. In conclusion, contrast radiography was considered very useful method to identify the site and type of obstruction in diagnosis of atresia coli.

• Journal of Veterinary Clinics
• /
• v.25 no.5
• /
• pp.408-410
• /
• 2008

A four months old, 3.6 kg intact female Miniature Dachshund dog was referred for non-weight bearing lameness at right hind limb due to car accident. On physical examination, the patient was non-weight bearing on the right hind leg and had moderate swelling in the proximal to middle tibia region. There was palpable crepitus. Radiographs revealed a slightly displaced, spiral, oblique fracture involving the proximal diaphyseal region of the right tibia. Fibular fracture was also noted. Internal fixation was performed to repair the fracture. Due to bowed shape of fractured tibia, it was not possible to apply K-wire, containing appropriate diameter ($60{\sim}80%$ of bone marrow diameter) for intramedullary fixation. We fixed the bowed tibia fracture using a smaller diameter (30% of bone marrow diameter) K-wire with cross pins and cerclage wires. Four weeks after the operation, radiographs demonstrated healing of the tibia fracture as well as the fibular fracture.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.161-168
• /
• 2006

During root canal preparation procedures, the potential for instrument separation is always present. Files, a lentulo, a Gates-Glidden (GG) bur or any manufactured obstruction can be left behind in the canal Nickel-titanium (NiTi) rotary files are in common usage in these days. Despite their undeniable advantages, there is a potential risk of separation within the canals. It is very rapid, unpredictable, and creates a great deal of stress for the practitioner. When an endodontic instrument separates, the best option is to remove it. Ultrasonic instruments and microscopes have improved the success rate for removing separated instruments. But It is difficult and not always possible. Therefore prevention is the key. In this case report, several management methods of separated file in the canal are presented.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.116-127
• /
• 2009

This research aims to improve the efficiency of production by selecting production configuration with high yield rate and lower error rate based on production history of steel pipe. To achieve this, we identify the properties of various types of MTO(make-to-order) steel pipe products and determine properties affecting yield rate and error rate using decision tree technique. From experimental results, we find out that specification is critical to determine yield rate and error rate of ERW steel pipes with mostly small and medium caliber, and an external diameter range in case of roll benders or spiral steel pipes with mostly large caliber. This research classified and embodied the patterns of yield rate and error rate mathematically by product properties.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.634-639
• /
• 2013

The aim of the study is to develop the 3D visualization of Building Information Model and integrated 4D model for optimization of resources in the construction project. This study discuss the process of methodology and creation of 4D model of the project and simulate it to monitor the workflow at the site. Different stages of the construction process and activities are generated by using Revit and MS Project. MS project has been used for creation of the schedules and these are linked with the Revit for 3D modeling. The time used as the fourth dimension and 4D model created by using Navisworks Time liner software. Narges shopping center is presented as a case study to realize the actual uses and benefits of Building Information Model (BIM). Narges shopping mall is located in Tehran, Iran. As a part of Hekmat master plan, Narges shopping center is an 11 stores building with a total area of 30000 Sq.m. This shopping and entertainment center is comprised of 150 retails and two multi-use public halls with a capacity of 400 persons each and underground parking with total 400 parking space. The main purpose of architecture was to create an urban public center along with its revolving, spiral like form and an ever changing continuous façade by means of different colors, materials, which is in harmony with the other building of the master plan. The approximate cost of the project is $17 million and duration of the project schedule is 30 months. The developed Building Information Model enabled us to identify the potential collisions or clashes between various structural and architectural systems. 4D model has been used for limiting the interaction between subcontractors installing the different systems so rework could be avoided and productivity maximized. It is also observed that the utility of BIM for construction stimulation and clash detection is the best suitable method. Clash detection before the implementation of work is highly recommended to avoid rework.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.415-423
• /
• 2016

Cylindrical laminated veneer lumber (LVL) is produced by winding the veneer tape on a circular cylinder. The veneer tape was produced by cutting the veneer into a rectangular shape and sewing it in a vertical direction to the fiber. The tensile strength test was carried out by producing the veneer tape specimen with different species of veneer, types and combinations of sewing yarn. The Radiata pine veneer tape produced with three sewing lines using the reinforced sewing thread had the best tensile strength. Also, the separation and snapping problems of the veneer tape were improved, resulting in the improvement in the workability of cylindrical LVL. The bending strength of various cylindrical LVL produced with different types of veneer tape and a different number of lamination layers and the application of reinforcement with glass fiber cloth was compared with that of Larix log. Bending MOR of cylindrical LVL reinforced with glass fiber cloth at the volume ratio of 11% was improved by 65% in comparison to the non-reinforced cylindrical LVL. In the case of the cylindrical LVL produced with 2 sewing lines of veneer tape, a fracture occurred at the butt joint between the veneer tapes. However, in the case of the cylindrical LVL produced with 3 sewing lines of veneer tape a fracture occurred in the fiber direction.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.355-363
• /
• 2021

The purpose of this research is to explore the selection attributes that the director of a taekwondo gym places importance on when purchasing a work of taekwon gymnastics for the competition. We conducted in-depth interviews with 6 participants using qualitative case study techniques, and analyzed data using Creswell's (2015) spiral analysis method. The data analysis results show music, trainees, characteristics of the work, criteria for evaluating the competition, producer competence, and price factors. As a result of the research, music should be produced around diverse and differentiated genres and music preferred by the trainees, and the appropriate theme should be selected considering the expressiveness and level of the trainees. The work should be considered creative works that harmonize the movement ratio of Taekwondo movements and dance, and the length of the work should be adjusted according to the purpose of the buyer, and the construction of the work should be based on the regulations of the competition. The manufacturer should ensure smooth communication with the buyer, including coaching ability and experience at the convention site. Prices will be affordable and affordable, and prices will need to be calculated based on special prices or mentoring periods for a small number of buyers.

• Geotechnical Engineering
• /
• v.9 no.2
• /
• pp.41-54
• /
• 1993

This paper presents the two and three -dimensional stability analysis of nonhom- ogeneous, c-o soil slopes. Potential failure surface is assumed as a logspiral curve refracted in boundaries of layers. In 3-D analysis, rotational soil mass is assumed with a cylindroid central part terminated with plane ends. Seismic force is considered by sesmic intensity. The program developed in this study is compared with the program PCSTABLS. The ratio of three-dimensional minimum factor of safety to two-dimensional case is examined and factor of safety changes are showed for the ratio of cylindroid length to slope height and numbers of slice. On such bases the following conclusions may by made : (1) The program developed in this program is less conservative than the program PCSTABLS. (2) The value of F2 of this study shows the larger differences than that of PCSTABLS with increasing friction angle (3) Factors of safety computed for 3-D geometry differ considerablely from ordinary 2-D factors of safety. Since Fb/F2 exceeds unity, three -dimensional effects tend to increase the factor of safety. (4) As the ratio of three - dimensional failure width of slope height, b/H increase, the value of Fb/Ff decreases and approaches 1.0 when bye is 14. (5) In calculating the factor of safety using the developed program the number of slices is suitable with the ranges of 30-40

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.314-320
• /
• 2014

Regarding the design of the gas sweetening absorber, the gas distribution analysis for the increase of the sour gas removal and reduction of the tower height is very important research topics. Recently, regarding the $CO_2$ capture technology which is a promising option for the reduction of the greenhouse gas (GHG), the need for the gas distribution improvement is increased as the gas treating capacity increases. In this paper, we have investigated the sour gas distribution in the absorber using CFD (Computational Fluid Dynamics) based on 10 MW post-combustion $CO_2$ capture plant installed in Boryeong power station, Korea Midland Power company. For this purpose, we suggested the three possible technology options (splash plate, spiral gas line and U-tube) for the gas distribution enhancement and compared the effect of the each cases. The result showed that the U-tube installed in the absorber increase the gas distribution about 30% compared to the base case, while the delta P increasement was about 10%. From these results, it was found that the U-tube installation is an effective technology option for the gas distribution enhancement in the gas sweetening absorber.