• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.51-57
• /
• 2011

The spin-up and the spring-back are most severe load cases in the aircraft landing gear design. These load cases are caused by reciprocal action of complex physical phenomenon such as the friction between a tire and ground, inertia of the rotation of a tire and the flexibility of a landing gear structure. Generally, the empirical formula or the theoretical formula is used to calculate the spin-up and spring-back load in the early stage of the development program of the aircraft landing gear. After the materialization of the design of a landing gear, spin-up and spring-back load are acquired by the free drop test. In this study, the spin-up and the spring-back load of the rubber shock absorber type KC-100 nose landing gear are calculated by the explicit finite element analysis. Through this analysis, more accurate and realistic spin-up and spring back loads could be applied to the early phase of the development of the aircraft landing gear.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.676-681
• /
• 2001

In this paper, the spin-up from rest to a state of solid-body rotation in a circular container with a slender rectangular obstacle on the bottom wall is analysed experimentally. We use a PIV method for the evolution of the free-surface flow. Laboratory experiments have been carried out for a variety of the obstacle height h(0, 5, 10 [mm]) and the liquid depth H(25, 50, 75, 100 [mm]). It was found that the spin-up time is crucially dependent on the obstacle height T. In the case of T=10[mm] the spin-up time is considerably shorter then the other cases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.456-462
• /
• 2001

Comprehensive numerical computations are made of a homogenous spin-up in a cylindrical cavity with a time-dependent rotation rate. Numerical solutions are acquired to the governing axisymmetric cylindrical Navier-Stokes equation. A rotation rate formula is ${\Omega}_f={\Omega}_i+{\Delta}{\Omega}(1-{\exp}(-t/t_c))$. If $t_c$ is large, it implies that a rotation change rate is small. The Ekman number, E, is set to $10^{-4}$ and the aspect ratio, R/H, fixed to I. For a linear spin-up(${\epsilon}<<$), the major contributor to spin-up in the interior is not viscous-diffusion term but inviscid term, especially Coriolis term, though $t_c$ is very large. The viscous-diffusion term only works near sidewall. But for spin-up from rest, when $t_c$ is very large, viscous-diffusion term affects interior area as well as sidewall, initially. So azimuthal velocity of interior for large $t_c$ appears faster than that of interior for relatively small $t_c$. However, the viscous-diffusion term of interior decreases as time increases. Instead, inviscid term appears in the interior.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.37-52
• /
• 2013

무어의 법칙에 따르면, 반도체의 집적도 2년마다 2배씩 증가한다고 한다. 무어의 법칙은 지금까지는 집적회로 기술의 발전을 잘 예측했다. 하지만 트랜지스터의 사이즈를 줄일수록 누수전류와 회로의 저항을 조절하기 어렵기 때문에 트랜지스터의 소형화에는 한계가 있다. 우리는 곧 무어의 법칙의 한계를 맞이할 것이다. 그래서 트랜지스터를 더욱 소형화시키기 위해서는 bottom-up analysis가 필요한 시점이다. Top-down analysis가 초기의 커다란 트랜지스터에서 점점 소형화를 시켜 작은 트랜지스터를 만든다는 개념인 반면, Bottom-up analysis는 처음부터 작은 분자를 조작하여 트랜지스터와 같은 성질을 띄도록 만드는 개념이다. 분자가 기억소자로서 이용되려면 저항이 다른 2가지 안정한 상태가 필요하다. 이번 연구에서 나는 기억소자를 디자인 하기 위하여 high spin state와 low spin state 두 가지 안정한 상태를 가지는 spin crossover complex를 이용하기로 했다. 이전의 연구에서 spin crossover 는 전기장을 이용해서도 유도될 수 있다고 확신하였고, 이를 이용해서 기억소자를 디자인하기로 하였다. 이번 연구를 위해서 symmetry를 가지는 octahedral spin crossover complex를 디자인하였고 이를 '기억 분자'라고 명명했다. 그리고 이 분자의 high spin state와 low spin state가 전기장을 이용하여 서로 바뀔 수 있는지 가능성을 DFT with B3LYP functional을 이용해서 비교했다. 그 결과로 전기장을 이용하여 기억분자의 spin crossover을 일으킬 수는 있지만 abnormally strong electric field를 써야 한다는 사실을 알아냈다. 이번 연구를 토대로 추후의 연구를 위해, 기억소자가 되기 위하여 분자가 어떤 특징을 만족시켜야 하는지를 분석했다.

• Advances in nano research
• /
• 제1권4호
• /
• pp.203-210
• /
• 2013

So far, all reviews and control approaches of spin relaxation have been done on lateral single electron quantum dots. In such structures, many efforts have been done, in order to eliminate spin-lattice relaxation, to obtain equal Rashba and linear Dresselhaus parameters. But, ratio of these parameters can be adjustable up to 0.7 in a material like GaAs under high-electric field magnitudes. In this article we have proposed a single electron QD structure, where confinements in all of three directions are considered to be almost identical. In this case the effect of cubic Dresselhaus interaction will have a significant amount, which undermines the linear effect of Dresselhaus while it was destructive in lateral QDs. Then it enhances the ratio of the Rashba and Dresselhaus parameters in the proposed structure as much as required and decreases the spin states up and down mixing and the deviation angle from the net spin-down As a result to the least possible value.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1056-1060
• /
• 2005

We investigated the fabrication and characteristics of the nitride-based spin-polarized LEDs with room-temperature ferromagnetic (Ga,Mn)N layer as a spin injection source. The (Ga,Mn)N thin films having room-temperature ferromagnetic ordering were found to exhibit the negative MR and anomalous Hall resistance up to room temperature, revealing the existence of spin-polarized electrons in (Ga,Mn)N films at room temperature. The electrical characteristics in the spin LEDs did not degraded in spite of the insertion of the (Ga,Mn)N layer into the LED structure. In EL spectra of the spin LEDs, it is confirmed that the devices produce intense EL emission at 7 K as well as room temperature. These results are expected to open up new opportunities to realize room-temperature operating semiconductor spintronic devices.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.771-783
• /
• 1995

A simplified model for the so-called ACRT(accelerated crucible rotation technique) Bridgman crystal growth was considered in order to investigate the principal effects of the periodic variation of angular velocity. Numerical solutions were obtained for Ro=0.5, Ra=4.236*10$_{6}$ and E=2.176*10$^{-3}$ . The effects of spin-up process combined with natural convection was investigated as a preliminary study. The spin-up time scale for the present problem was a little larger than that observed for homogeneous spin-up problems. Numerical results reveal that over a time scale of (H$^{2}$/.nu..omega.$_{f}$)$^{1}$2/ the forced convection due to the formation of Ekman layer predominates. When the state of rigid body rotation is attained, natural convection due to buoyancy emerges as the main driving force and them the steady-state is approached asymptotically. Based on our preliminary results with simple spin-up, several fundamental features associated with variation of rotation speed are successfully identified. When a periodic variation of angular velocity was imposed, the system response was also periodic. Due to effect of mixing, the heat transfer was enlarged. From the analysis of time-averaged Nusselt number along the bottom surface the effect of a periodic variation of angular velocity on the interface location could be indirectly identified.d.

• 천문학회지
• /
• 제43권5호
• /
• pp.161-168
• /
• 2010

Magnetars are neutron stars possessing a magnetic field of about $10^{14}-10^{15}$ G at the surface. Thermodynamic properties of neutron star matter, approximated by pure neutron matter, are considered at finite temperature in strong magnetic fields up to $10^{18}$ G which could be relevant for the inner regions of magnetars. In the model with the Skyrme effective interaction, it is shown that a thermodynamically stable branch of solutions for the spin polarization parameter corresponds to the case when the majority of neutron spins are oriented opposite to the direction of the magnetic field (i.e. negative spin polarization). Moreover, starting from some threshold density, the self-consistent equations have also two other branches of solutions, corresponding to positive spin polarization. The influence of finite temperatures on spin polarization remains moderate in the Skyrme model up to temperatures relevant for protoneutron stars. In particular, the scenario with the metastable state characterized by positive spin polarization, considered at zero temperature in Phys. Rev. C 80, 065801 (2009), is preserved at finite temperatures as well. It is shown that, above certain density, the entropy for various branches of spin polarization in neutron matter with the Skyrme interaction in a strong magnetic field shows the unusual behavior, being larger than that of the nonpolarized state. By providing the corresponding low-temperature analysis, we prove that this unexpected behavior should be related to the dependence of the entropy of a spin polarized state on the effective masses of neutrons with spin up and spin down, and to a certain constraint on them which is violated in the respective density range.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.207-212
• /
• 2001

In this study, spin-up flows in a shallow rectangular container are analysed by using three-dimensional computation. We compared our results with those obtained by quasi three-dimensional computation. Our results show that quasi S-D solustion is not accurate enough and it provides far less damped solution.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2003

In this paper, we report the numerical and experimental results in a half-cylinder. In the numerical computation, we used the zonal embedded grid system. Flow visualization for the spin-up flows was used by PIV. The results show that at left hand side an cyclonic cell moves along a wall and separates into both cells at right hand side.